1 December 2022 in Journal of the Atmospheric Sciences
We investigate characteristics of large-scale coherent motions in the atmospheric boundary layer using field measurements made with two long-range scanning wind lidars. The joint scans provide quasi-instantaneous wind fields over a domain of ∼50 km2, at two heights above flat but partially forested terrain. Along with the two-dimensional wind fields, two-point statistics and spectra are used to identify and characterize the scales, shape, and anisotropy of coherent structures—as well as their influence on wind field homogeneity. For moderate to high wind speeds in near-neutral conditions, most of the observed structures correspond to narrow streaks of low streamwise momentum near the surface, extending several hundred meters in the streamwise direction; these are associated with positive vertical velocity ejections. For unstable conditions and moderate winds, these structures become large-scale rolls, with longitudinal extent exceeding the measuring domain (>∼5 km); they dominate the conventional surface-layer structures in terms of both physical scale and relative size of velocity-component variances, appearing as quasi-two-dimensional structures throughout the entire boundary layer. The observations shown here are consistent with numerical simulations of atmospheric flows, field observations, and laboratory experiments under similar conditions. Significance Statement: Coherent structures have attracted the interest of researchers for decades, being viewed as the closest to “order” that we can find within the chaos of turbulence. In the turbulent atmospheric boundary layer, micro- and mesoscale coherent structures come in many shapes and sizes, such as convective cells, rolls, or streaks. In this study we used dual lidars (remote sensing measurements), developing analysis of their tandem usage to characterize in detail some of the large-scale coherent structures generated over flat terrain. This allowed us to better understand the mechanisms that generate such structures and describe their influence on the morphology of the turbulent atmospheric boundary layer across a good deal of its depth.
3 November 2022 in Wind Energy Science
The EU and UK have made ambitious commitments under the net-zero plans to decarbonise their economies by 2050. For this, offshore wind will play a major role, significantly contributing to a paradigm shift in the power generation and greater volatility of electricity prices. The operating strategy of wind farms should therefore move from power maximisation to profit maximisation which includes income from providing power system services and the reduction of maintenance costs. Wind farm flow control (WFFC) is a key enabler for this shift through mitigation of wake effects in the design and operation phases. The results of the FarmConners market showcases presented here are the first attempt to economically assess WFFC strategies with respect to electricity market prices. Here, we present a conceptual simulation study starting from individual turbine control and extend it to layouts with 10 and 32 turbines operated with WFFC based on the results of five participants. Each participant belonged to a different research group with their respective simulation environments, flow models and WFFC strategies. Via a comparative analysis of relative WFFC benefits estimated per participant, the implications of wind farm size, the applied control strategy and the overall model fidelity are discussed in zero-subsidy scenarios. For all the participants, it is seen that the income gain can differ significantly from the power gain depending on the electricity price under the same inflow, and a favourable control strategy for dominant wind directions can pay off even for low electricity prices. However, a strong correlation between income and power gain is also observed for the analysed high-electricity-price scenarios, underlining the need for additional modelling capabilities to carry out a more comprehensive value optimisation including lower prices and system requirements driven cases.
20 November 2020 in Atmospheric Measurement Techniques
Wind lidars present advantages over meteorological masts, including simultaneous multipoint observations, flexibility in measuring geometry, and reduced installation cost. But wind lidars come with the “`cost” of increased complexity in terms of data quality and analysis. Carrier-to-noise ratio (CNR) has been the metric most commonly used to recover reliable observations from lidar measurements but with severely reduced data recovery. In this work we apply a clustering technique to identify unreliable measurements from pulsed lidars scanning a horizontal plane, taking advantage of all data available from the lidars – not only CNR but also line-of-sight wind speed (VLOS), spatial position, and VLOS smoothness. The performance of this data filtering technique is evaluated in terms of data recovery and data quality against both a median-like filter and a pure CNR-threshold filter. The results show that the clustering filter is capable of recovering more reliable data in noisy regions of the scans, increasing the data recovery up to 38 % and reducing by at least two-thirds the acceptance of unreliable measurements relative to the commonly used CNR threshold. Along with this, the need for user intervention in the setup of data filtering is reduced considerably, which is a step towards a more automated and robust filter.
11 May 2026 in Wind Energy Science
Wake steering is a promising control strategy for wind farm optimization, yet its effectiveness depends on the accuracy of underlying aerodynamic and structural models. In this study, we evaluate the predictive capabilities of models with varying fidelity for the IEA 22 MW reference turbine, considering both a single turbine and a two-turbine row with 5D spacing under conventionally neutral atmospheric boundary layer conditions. Results are benchmarked against large-eddy simulations (LESs). All models reproduced qualitative trends in power and, where applicable, loads as a function of yaw angle and downstream position, but there was a large spread in quantitative agreement. The dynamic wake meandering (DWM) model implemented in Dynamiks gave very good predictions for mean power, acceptable results for blade and yaw bending damage equivalent loads (DELs) but heavily underpredicted the tower bottom DELs compared to LESs. RANS results from EllipSys3D resolved asymmetric wake features but with reduced magnitude, leading to increasing errors for power prediction with increasing wake deflection. Steady-state engineering models (PyWake and Fuga) performed reasonably well for power prediction in the aligned cases but showed increasing errors under yaw misalignment. None of the engineering models reproduced secondary steering. These findings highlight the limitations of the tested engineering and mid-fidelity models, and emphasize the need for improved treatment of wake asymmetry, veer effects, and meandering physics to enhance reliability in practical optimization applications.
20 October 2025 in EGUsphere
Wake steering is a promising control strategy for wind farm optimization, yet its effectiveness depends on the accuracy of underlying aerodynamic and structural models. In this study, we evaluate the predictive capabilities of models with varying fidelity for the IEA 22 MW reference turbine, considering both a single turbine and a two-turbine row with 5D spacing under conventionally neutral atmospheric boundary layer conditions. Results are benchmarked against large-eddy simulations (LES). All models reproduced qualitative trends in power and, where applicable, loads as a function of yaw angle and downstream position, but there was a large spread in quantitative agreement. The dynamic wake meandering (DWM) model implemented in Dynamiks gave very good predictions for mean power, acceptable results for blade and yaw bending Damage Equivalent Loads (DELs), but heavily underpredicted the tower bottom DELs compared to LES. RANS results from EllipSys3D resolved asymmetric wake features, but with reduced magnitude, leading to increasing errors for power prediction with increasing wake deflection. Steady-state engineering models (PyWake and Fuga) performed reasonably well for power prediction in the aligned cases but showed increasing errors under yaw misalignment. None of the engineering models reproduced secondary steering. These findings highlight the limitations of the tested engineering and mid-fidelity models and emphasize the need for improved treatment of wake asymmetry, veer effects, and meandering physics to enhance reliability in practical optimization applications.
20 February 2020 in EGUsphere
Wind lidars present advantages over meteorological masts, including simultaneous multi-point observations, flexibility in measuring geometry, and reduced installation cost; but wind lidars come with the cost of increased complexity in terms of data quality and analysis. Carrier-to-noise ratio (CNR) has been the metric most commonly-used to recover reliable observations from lidar measurements, but with severely reduced data recovery. In this work we apply a clustering technique to identify unreliable measurements from pulsed lidars scanning a horizontal plane, taking advantage of all data available from the lidars–not only CNR, but also line-of-sight wind speed (VLOS), spatial position, and VLOS smoothness. The performance of this data filtering technique is evaluated in terms of data recovery and data quality, against both a median-like filter and a pure CNR-threshold filter. The results show that the clustering filter is capable of recovering more reliable data in noisy regions of the scans, increasing the data recovery up to 38 % and reducing by at least two thirds the acceptance of unreliable measurements, relative to the commonly used CNR-threshold. Along with this, the need for user intervention in the setup of data filtering is reduced considerably, which is a step towards a more automated and robust filter.