1 September 2023 in Physics of Fluids
Wind turbines experience a range of turbulent time and length scales related to the atmospheric boundary layer, wakes of upstream turbines, and wind farm effects. This work aims to investigate the impact of turbulent scales on wake behavior and recovery, in isolation from overall turbulence intensity, shear, or buoyancy. Large eddy simulations of a single turbine are conducted using idealized single time scale inflows and full spectra turbulent inflows, varying the predominant time scale in the equivalent Strouhal number range of St=0.04–0.5, while maintaining the same turbulence intensity and flow structures. Under idealized inflows, shorter inflow time scales result in a faster breakdown of tip vortices, while longer scales induce greater wake meandering. For full spectra turbulent inflows, shorter integral time scales result in a shorter near-wake region and enhanced wake recovery, while wake meandering occurs to a similar extent when adjusted for the near-wake breakdown location. A wake-generated turbulence region in the range of St=0.3–0.7 is identified in the streamwise velocity spectra, and inflows that contain more turbulent kinetic energy in this range show a faster redistribution from long inflow scales to smaller wake-generated turbulence and enhanced wake recovery. The improved wake recovery for the shortest integral time scale results in a 9% increase in mean rotor-averaged velocity and 35% increase in power at 12R downstream, compared to the longest integral time scale. Overall, it is shown that inflow turbulent scales have a significant impact on wake recovery, particularly through their impact on the near-wake breakdown.
23 May 2022 in Frontiers in Energy Research
AFAlexander R. Meyer Forsting
Alexander R. Meyer Forsting
+1
The actuator line method is a widely used technique to model wind turbines in computational fluid dynamics, as it significantly reduces the required computational expense in comparison to simulations using geometrically resolved blades. Actuator line coupled to an aeroelastic solver enables not only the study of detailed wake dynamics but also aeroelastic loads, flexible blade deformation and how this interacts with the flow. Validating aeroelastic actuator line predictions of blade loading, deflection and turbine wakes in complex inflow scenarios is particularly relevant for modern turbine designs and wind farm studies involving realistic inflows, wind shear or yaw misalignment. This work first implements a vortex-based smearing correction in an aeroelastic coupled actuator line, and performs a grid resolution and smearing parameter study which demonstrates significant improvement in the blade loading and in the numerical dependencies of predicted thrust and power output. A validation is then performed using a 2.3 MW turbine with R = 40 m radius, comparing against blade resolved fluid-structure interaction simulations and full-scale measurement data, in both laminar and turbulent inflows including both high shear and high yaw misalignment. For an axisymmetric laminar inflow case, the agreement between blade resolved and actuator line simulations is excellent, with prediction of integrated quantities within 0.2%. In more complex flow cases, good agreement is seen in overall trends but the actuator line predicts lower blade loading and flapwise deflection, leading to underpredictions of thrust by between 5.3% and 8.4%. The discrepancies seen can be attributed to differences in wake flow, induction, the reliance of the actuator line on the provided airfoil data and the force application into the computational domain. Comparing the wake between coupled actuator line and blade resolved simulations for turbulent flow cases also shows good agreement in wake deficit and redirection, even under high yaw conditions. Overall, this work validates the implementation of the vortex-based smearing correction and demonstrates the ability of the actuator line to closely match blade loading and deflection predictions of blade resolved simulations in complex flows, at a significantly lower computational cost.
20 July 2022 in Wind Energy Science
The power performance of a wind turbine in complex terrain is studied by means of large eddy simulations (LESs). The simulations show that the turbine performance is significantly different compared to what should be expected from the available wind. The reason for this deviation is that the undisturbed flow field behind the turbine is non-homogeneous and therefore results in a very different wake development and induction than seen for a turbine in flat homogeneous terrain.
24 October 2024 in Wind Energy Science
Wind turbines are increasing in size and operate more frequently above the atmospheric surface layer, which requires improved inflow models for numerical simulations of turbine interaction. In this work, a steady-state Reynolds-averaged Navier–Stokes (RANS) model of the neutral and stable atmospheric boundary layer (ABL) is introduced. The model incorporates buoyancy in the turbulence closure equations using a prescribed Brunt–Väisälä frequency, does not require a global turbulence length-scale limiter, and is only dependent on two non-dimensional numbers. Assuming a constant temperature gradient over the entire ABL, although a strong assumption, leads to a simple and well-behaved inflow model. RANS wake simulations are performed for shallow and tall ABLs, and the results show good agreement with large-eddy simulations in terms of velocity deficit from a single wind turbine. However, the proposed RANS model underpredicts the magnitude of the velocity deficit of a wind turbine row for the shallow ABL case. In addition, RANS ABL models can suffer from numerical problems when they are applied as a shallow-ABL inflow model to large wind farms due to the low-eddy-viscosity layer above the ABL. The proposed RANS model inherits this issue, and further research is required to solve it.
16 November 2024 in Renewable Energy
11 May 2026 in Wind Energy Science
Wake steering is a promising control strategy for wind farm optimization, yet its effectiveness depends on the accuracy of underlying aerodynamic and structural models. In this study, we evaluate the predictive capabilities of models with varying fidelity for the IEA 22 MW reference turbine, considering both a single turbine and a two-turbine row with 5D spacing under conventionally neutral atmospheric boundary layer conditions. Results are benchmarked against large-eddy simulations (LESs). All models reproduced qualitative trends in power and, where applicable, loads as a function of yaw angle and downstream position, but there was a large spread in quantitative agreement. The dynamic wake meandering (DWM) model implemented in Dynamiks gave very good predictions for mean power, acceptable results for blade and yaw bending damage equivalent loads (DELs) but heavily underpredicted the tower bottom DELs compared to LESs. RANS results from EllipSys3D resolved asymmetric wake features but with reduced magnitude, leading to increasing errors for power prediction with increasing wake deflection. Steady-state engineering models (PyWake and Fuga) performed reasonably well for power prediction in the aligned cases but showed increasing errors under yaw misalignment. None of the engineering models reproduced secondary steering. These findings highlight the limitations of the tested engineering and mid-fidelity models, and emphasize the need for improved treatment of wake asymmetry, veer effects, and meandering physics to enhance reliability in practical optimization applications.