29 July 2026 in Bulletin of Shakarim University. Technical Sciences
This article presents and experimentally validates a formalized development flow for a specialized cryptographic controller designed for hardware implementation of digital signature algorithms. The flow covers the complete design cycle, encompassing architectural synthesis, RTL implementation, FPGA-based hardware verification, and physical implementation within an MPW flow. The controller architecture follows a modular design principle, in which the system is decomposed into functionally independent hardware blocks that are developed and verified individually. For each block, RTL implementation, software interface generation, and hardware verification are carried out during FPGA prototyping, enabling early detection of functional and interface errors. Critical components undergo additional physical verification through an RTLto-GDS flow, including DRC and LVS checks. Upon completion of modular verification, the blocks are integrated, a memory map is generated, and system-level hardware verification is performed. The approach was experimentally validated on a demonstration computing module based on the TinyQV (RISC-V) core, using the GOWIN Tang Primer 20K and TinyTapeout (PDK SkyWater SKY130) platforms. The results confirm the reproducibility of the proposed flow and its practical applicability for developing specialized cryptographic controllers and secure embedded systems.
30 September 2026 in Eurasian Journal of Applied Engineering and Technology (EJAET)
This article proposes and experimentally validates a formalized development flow for a specialized cryptographic controller designed for hardware implementation of electronic digital signatures. The proposed flow is a methodology encompassing the full development cycle – from architectural design to project preparation for MPW production. The controller architecture is based on a modular principle, whereby the system consists of functionally independent hardware blocks developed and verified as individual modules. Each module undergoes RTL implementation, hardware abstraction layer development, and hardware verification during FPGA prototyping. Critical modules are subjected to hardware verification and physical validation within the MPW pipeline. Following modular verification, the blocks are integrated into the system, the final memory map is generated, and system hardware verification is conducted. Experimental validation of the methodology was carried out on a TinyQV demonstration computing module compatible with the RISC-V architecture. Hardware verification was executed on the GOWIN Tang Primer 20K FPGA platform, and the physical implementation was realized in the TinyTapeout platform MPW flow using the SkyWater SKY130 PDK. The results confirm the reproducibility of the proposed development path and its applicability for creating specialized cryptocontrollers for information security and embedded systems.