Soft-bodied robots, due to their intrinsic compliance, have shown great potential for operating within unstructured environment and interacting with unknown objects. This letter deals with automatic design and fabrication of soft robots. From a structure point of view, we synthesize a soft cable-driven gripper by recasting its mechanical design as a topology optimization problem. Building on previous work on compliant mechanism optimization, we model the interactions between the gripper and objects more practically, in form of pressure loadings and friction tractions, and furthermore, we investigate how the interaction uncertainties affect the optimization solution by varying the contact location and area. The optimized soft fingers were three-dimensionally printed and then assembled to build a gripper. The experiments show that the gripper can handle a large range of unknown objects of different shapes and weights (up to 1 kg), with different grasping modes. This letter represents an important step toward leveraging the full potential of the freeform design space to generate novel soft-bodied robots.
This article presents a versatile soft crawling robot capable of rapid and effective locomotion. The robot mainly consists of two vacuum-actuated spring actuators and two electrostatic actuators. By programming the actuation sequences of different actuators, the robot is able to achieve two basic modes of locomotion: linear motion and turning. Subsequently, we have developed analytical models to interpret the static actuation performance of the robot body, including linear and bending motions. Moreover, an empirical dynamic model is also developed to optimize the locomotion speed in terms of frequency and duty cycle of the actuation signal. Furthermore, with the help of the strong electroadhesion force and fast response of the deformable body, the soft robot achieves a turning speed of 15.09°/s, which is one of the fastest among existing soft crawling robots to the best of our knowledge. In addition to the rapid and effective locomotion, the soft crawling robot can also achieve multiple impressive functions, including obstacle navigation in confined spaces, climbing a vertical wall with a speed of 6.67 mm/s (0.049 body length/s), carrying a payload of 69 times its self-weight on a horizontal surface, crossing over a 2 cm (0.15 body length) gap, and kicking a ball.
19 December 2018 in Science China Technological Sciences
Jellyfish are among the widely distributed nature creatures that can effectively control the fluidic flow around their transparent soft body, thus achieving movements in the water and camouflage in the surrounding environments. Till now, it remains a challenge to replicate both transparent appearance and functionalities of nature jellyfish in synthetic systems due to the lack of transparent actuators. In this work, a fully transparent soft jellyfish robot is developed to possess both transparency and bio-inspired omni motions in water. This robot is driven by transparent dielectric elastomer actuators (DEAs) using hybrid silver nanowire networks and conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/waterborne polyurethane as compliant electrodes. The electrode exhibits large stretchability, low stiffness, high transmittance, and excellent conductivity at large strains. Consequently, the highly transparent DEA based on this hybrid electrode, with Very-High-Bond membranes as dielectric layers and polydimethylsiloxane as top coating, can achieve a maximum area strain of 146% with only 3% hysteresis loss. Driven by this transparent DEA, the soft jellyfish robot can achieve vertical and horizontal movements in water, by mimicking the actual pulsating rhythm of an Aurelia aurita . The bio-inspired robot can serve multiple functions as an underwater soft robot. The hybrid electrodes and bio-inspired design approach are potentially useful in a variety of soft robots and flexible devices.