26 February 2019 in Journal of Vacuum Science & Technology A
Indium nitride (InN) is a low bandgap, high electron mobility semiconductor material of interest to optoelectronics and telecommunication. Such applications require the deposition of uniform crystalline InN thin films on large area substrates, with deposition temperatures compatible with this temperature-sensitive material. As conventional chemical vapor deposition (CVD) struggles with the low temperature tolerated by the InN crystal, the authors hypothesize that a time-resolved, surface-controlled CVD route could offer a way forward for InN thin film deposition. In this work, the authors report atomic layer deposition of crystalline, wurtzite InN thin films using trimethylindium and ammonia plasma on Si(100). They found a narrow atomic layer deposition window of 240–260 °C with a deposition rate of 0.36 Å/cycle and that the flow of ammonia into the plasma is an important parameter for the crystalline quality of the film. X-ray diffraction measurements further confirmed the polycrystalline nature of InN thin films. X-ray photoelectron spectroscopy measurements show nearly stoichiometric InN with low carbon level (<1 at. %) and oxygen level (<5 at. %) in the film bulk. The low carbon level is attributed to a favorable surface chemistry enabled by the NH3 plasma. The film bulk oxygen content is attributed to oxidation upon exposure to air via grain boundary diffusion and possibly by formation of oxygen containing species in the plasma discharge.
1 January 2021 in Journal of Vacuum Science & Technology A
Gallium nitride (GaN) is one of the most important semiconductor materials in modern electronics. While GaN films are routinely deposited by chemical vapor deposition at around 1000 °C, low-temperature routes for GaN deposition need to be better understood. Herein, we present an atomic layer deposition (ALD) process for GaN-based on triethyl gallium (TEG) and ammonia plasma and show that the process can be improved by adding a reactive pulse, a “B-pulse” between the TEG and ammonia plasma, making it an ABC-type pulsed process. We show that the material quality of the deposited GaN is not affected by the B-pulse, but that the film growth per ALD cycle increases when a B-pulse is added. We suggest that this can be explained by the removal of ethyl ligands from the surface by the B-pulse, enabling a more efficient nitridation by the ammonia plasma. We show that the B-pulsing can be used to enable GaN deposition with a thermal ammonia pulse, albeit of x-ray amorphous films.
31 August 2020 in Applied Physics Letters
Indium nitride (InN) is a highly promising material for high frequency electronics given its low bandgap and high electron mobility. The development of InN-based devices is hampered by the limitations in depositing very thin InN films of high quality. We demonstrate growth of high-structural-quality nanometer thin InN films on 4H–SiC by atomic layer deposition (ALD). High resolution x-ray diffraction and transmission electron microscopy show epitaxial growth and an atomically sharp interface between InN and 4H–SiC. The InN film is fully relaxed already after a few atomic layers and shows a very smooth morphology where the low surface roughness (0.14 nm) is found to reproduce sub-nanometer surface features of the substrate. Raman measurements show an asymmetric broadening caused by grains in the InN film. Our results show the potential of ALD to prepare high-quality nanometer-thin InN films for subsequent formation of heterojunctions.
4 October 2021 in Journal of Applied Physics
Epitaxial nanometer-thin indium nitride (InN) films are considered promising active layers in various device applications but remain challenging to deposit. We compare the morphological evolution and characterizations of InN films with various growth conditions in chemical vapor deposition (CVD) by both a plasma atomic layer deposition (ALD) approach and a conventional metalorganic CVD approach. Our results show that a time-resolved precursor supply is highly beneficial for deposition of smooth and continuous InN nanometer-thin films. The time for purging the reactor between the precursor pulses and low deposition temperature are key factors to achieve homogeneous InN. The gas exchange dynamics of the reactor is further studied using computational fluid dynamics. According to our study, 320 °C is found to be the upper temperature where the dynamics of the deposition chemistry can be controlled to involve only surface reactions with surface species. The results highlight the promising role of the ALD technique in realizing electronic devices based on nanometer-thin InN layers.
29 January 2021 in Journal of Vacuum Science & Technology A
The increasingly complex nanoscale three-dimensional and multilayered structures utilized in nanoelectronic, catalytic, and energy conversion/storage devices necessitate novel substrate-selective material deposition approaches featuring bottom-up and self-aligned precision processing. Here, we demonstrate the area-selective atomic layer deposition (AS-ALD) of two noble metals, Pt and Pd, by using a plasma-polymerized fluorocarbon layer as growth inhibition surfaces. The contact angle, x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy measurements were performed to investigate the blocking ability of polymerized fluorocarbon (CFx) layers against ALD-grown metal films. Both Pt and Pd showed significant nucleation delays on fluorocarbon surfaces. Self-aligned film deposition is confirmed using this strategy by growing Pt and Pd on the microscale lithographically patterned CFx/Si samples. CFx blocking layer degradation during ozone exposure was analyzed using XPS measurements, which confirmed the oxygen physisorption as the main responsible surface reaction with further hydroxyl group formation on the CFx surface. Our work reveals that the CFx layer is compatible with an ozone coreactant until the blocking polymer cannot withstand oxygen physisorption. Our results could potentially be used to investigate and develop radical-assisted AS-ALD processes for a wider selection of materials.