6 April 2020 in POWER ENGINEERING: economics, technique, ecology
The article discusses topical issues and problems of the impact of industrial road transport on the environment, namely: emissions of pollutants into the atmosphere depending on the type of fuel and their negative impact on human health. The significant increase in the vehicle fleet is causing great harm in the form of harmful emissions from fuel combustion systems, which cannot be dealt with standard car cleaning systems. The situation is aggravated by the fact that car emissions are concentrated in the surface air layer - precisely in the zone of our breathing. Low- quality gasoline is still used, polluting the environment. About 280 harmful substances were found in the exhaust gases of cars, including carcinogenic benzopyrenes, nitrogen oxides, lead, mercury, aldehydes, carbon oxides, soot, hydrocarbons. These emissions increase significantly when starting off or increasing speed. Diesel engine emissions are different from gasoline engine emissions. A diesel engine burns fuel more completely, oxidizes less carbon and produces less non-combustible hydrocarbons. But, at the same time, due to the lack of air in the diesel engine, more nitrogen oxide is formed. Diesel engines also emit soot. Gas emissions from transport into the atmosphere are exposed to sunlight, which leads to photochemical reactions leading to the formation of NО2, 0з, peroxides, benzopyrene (C22H14) and other compounds. In addition, each vehicle emits rubber dust into the atmosphere when its tires are abraded and worn out. Accordingly, the scale of damage caused by transport to the environment and people is also increasing. The article analyzes the existing and promising types of fuel and the reduction of the technogenic impact of industrial road transport on the environment in Ukraine.
30 August 2022 in Eastern-European Journal of Enterprise Technologies
This paper considers and analyzes a relevant issue of treatment of disturbed soils. The equipment to carry out various processes of mining reclamation of waste heaps and quarries with a significant reduction in the level of environmental risks through the operation of an energy-saving small-sized apparatus has been designed. The use of the developed soil reclamator is also adequate for pre-sowing and other types of agrotechnical tillage, plant care in agricultural fields, as well as in areas with a heterogeneous landscape. The functionality of the unit is able to provide energy autonomy and automation of the technological process. The low weight of the device makes it possible to reduce the pressure on the soil, which minimizes the environmentally hazardous formation of dust during the treatment of waste heaps, the destruction of its structure, the machine degradation of the fertile layer during the processing of all types of territories. The device also reduces the risk of fertile soils slipping from the slopes of mine dumps due to the fact that the soil reclamator is self-propelled and functions without the need to involve a heavy tractor. The mathematical modeling of the operation of the proposed technical support for the treatment of waste heap reclamation in comparison with the opposed analog proves the ecological and economic efficiency of the eco-adaptive soil reclamator. The average value of profit ratios, when using the proposed soil reclamator, is 121.82 % higher than with the involvement of opposed equipment. Indicators of the negative environmental impact of the designed equipment are 100 % lower than the environmental impact when operating the analog. The proposed technical solution can be effectively applied both in schemes of sanitary cleaning of settlements, and in the process of modernization of agricultural machinery
30 November 2021 in Geoengineering
The purpose of the paper is to analyze a deformation mechanism of the mine degassing pipelines to forecast their spatial changes in terms of intensification of underground mining of coal-gas seams. Methodology. The paper deals with expert assessment of the available approaches to diagnostics of technical condition of mine degassing pipelines, which are constructed within the in-seam underground mine workings with the floor rocks prone to heaving. The results of scheduled surveying measurements of technical condition of in-seam development workings have helped identify the potentially hazardous zones of rock mass deformation and indices of changes in spatial location of section degassing pipelines mounted in those mine workings. To determine the operating modes of a degassing pipeline under such operating conditions, a computer model of interaction of the elements of transport-technological system “mine gas pipeline – mine working” has been developed Findings. Diagnostics of technical conditions of the mine gas transmission lines and examination of their dismantled components have helped understand that deflections, mainly resulting in water accumulation zones, intensive corrosion of internal pipe walls, and mechanical depositions of coal and rock dust take place right within the flange connection areas. Formation of such zones is argued by health of the degassing pipeline as well as mine air inflow. Availability of internal corrosion, water accumulations, and mine air inflow decreases substantially capacity of the underground gas transmission line inclusive of qualitative characteristics of the captured methane-air mixture and efficiency of MDS on the whole. Originality. New approaches to diagnostics of technical condition of mine degassing gas pipeline in difficult mining and geological conditions of development of gas-bearing coal seams are substantiated and it is offered to consider indicators of their functioning as interacting in space and time transport-technological system "mine gas pipeline - mining". Practical implications. The operational parameters of mine degassing systems notes that the equipment performance with the least underpressure losses created by vacuum pipes requires that the degassing pipeline should have minimum hydraulic resistance of the gas transmission network. Pipeline aeration from the mine workings and water accumulations should be prevented by means of qualitative hermetic sealing of its flange connections as well as the pipeline straightness with the corresponding pitches. Consequently, the basic requirements for operating mine degassing pipelines involve their design profile, tightness of flange connections of pipes as well as operative control of the facility health.
17 May 2021 in Geoengineering
The article is devoted to the urgent problem of increasing the efficiency of blasting operations in open pits in conditions of high water saturation of minerals. The idea of solving this problem is to use the effect of draining the local area of the water-saturated block of the mineral due to the ordinal explosion of the well charge. The purpose of this study was to improve the efficiency of blasting operations on flooded fractured rocks in open pit mining. Research methodology. The proposed technique makes it possible to determine the parameters of drainage of the watered mass during the explosion of borehole charges and the parameters of an ordinal explosion. This makes it possible to improve the quality of rock crushing and reduce the consumption of explosives per unit cost. The main direction of research in this work is to reduce the energy intensity of the process of destruction of a water-saturated mineral by using the internal potential of water in the cracks of the massif destroyed by the explosion. The regularities and the role of the drainage funnel in the efficiency of destruction have been established. The novelty and originality of the work is a developed technology for removing water from the explosion zone, which increases the efficiency of explosion and destruction of rocks using special water-resistant explosives. The practical value of the work lies in the effectiveness of the proposed method for carrying out blasting operations, which, along with improving the quality of crushing, provides an increase in the output of blasted rock mass from one running meter of the well and reduces the cost of expensive water-resistant explosives. Conclusions. The introduction of research results and recommendations in open pits made it possible to increase the efficiency of blasting operations in the development of water-saturated rocks. Energy consumption for the destruction of an array of water-saturated minerals is reduced by 10%. The amount of blasted rock mass per running meter of the well increased by 14.1%, and the specific consumption of explosives decreased by (12-14) %. Keywords: quarry, minerals, well, filtration, water-saturated massif, crushing, explosive, detonation.