Following the Great East Japan Earthquake, a massive tsunami caused serious damage to coastal dikes. Local scour at the ground behind these dikes reportedly causes dike failures. It is important to reveal the scour process to establish methods for effective scour countermeasures. Herein, we focus on geogrids. To verify this proposal and examine its design, flume-model experiments were performed for non-liquefied and liquefied grounds behind coastal dikes. The results showed that the scour amount and area were reduced drastically when geogrids were present. Geogrids on the sand-bed surface changed the direction of overflow water. Thus, a scour hole developed away from a coastal dike model. Furthermore, geogrids exerted a scour-reduction effect even during liquefaction.
The aim of the present study is to elucidate the soil–pipe interaction in saturated sand with different effective stress. A force–displacement curve that took into account the variation of the effective stress was formulated based on the results of lateral loading experiments on a model pipe. To reproduce liquefaction experimentally, the effective stress of the soil bed was controlled by the upward seepage induced by a hydraulic gradient. The model pipe was pulled laterally under either displacement or load control. The experimental results indicate that the normalised force–displacement relationships can be well approximated by hyperbolic curves under each hydraulic gradient. When the variation in effective stress is reflected in the submerged unit weight of the soil, the two coefficients of the hyperbolic curves also show a hyperbolic dependence on the unit weight, and the ultimate resistive force increases in proportion to the unit weight. The predicted force–displacement curve fits relatively well to the experimental results.