15 August 2022 in Applied Physics Letters
High-pressure hydrogen annealing (HPHA) treatment is an effective hydrogen doping method to improve electrical characteristics and stability of InGaZnO (IGZO) thin film transistors (TFTs). The HPHA effects on IGZO TFTs under various pressure conditions were investigated using analytical techniques. Drive current, field effect mobility, subthreshold swing, and bias stress stability of IGZO TFTs were significantly improved as the HPHA pressure was increased up to 20 atm. To analyze the performance enhancement, secondary ion mass spectroscopy, capacitance–voltage analysis, and x-ray photoelectron spectroscopy analysis techniques were performed. As a result, it was confirmed that doped hydrogen is combined with interface trap sites and oxygen vacancy related bulk defect sites, leading to improved subthreshold swing and bias stress stability. Furthermore, bulk trap passivation also contributes to high carrier density, thereby increasing driving current and field effect mobility. With increasing HPHA pressure condition, these effects of trap passivation and increase in the carrier density are more effective due to the heavily injected hydrogen.
17 January 2024 in IEEE Electron Device Letters
Hf 0.5 Zr 0.5 O 2 (HZO) faces challenges related to variability and reliability due to the instability of ferroelectric phase crystallization. This instability exacerbates reliability issues in HZO devices, especially as devices scale down to the nanometer level. In this study, we explore a method to tackle these issues in nano-scale ferroelectric HZO devices by directly analyzing switchable polarization. The devices used for the analysis are fabricated through different O3 treatments, and the effects on variability and reliability are demonstrated. We calculate the switchable polarization values from the current responses to Positive Up Negative Down (PUND) voltage pulses. We then compare the device-to-device and cycle-to-cycle uniformity of 500 nm size devices and predict the variability of 100 nm size devices through phase distribution simulation. Additionally, we measure and compare imprint and retention properties using write and read delay tests at 85 °C. Our comprehensive analysis offers insights for fabricating reliable ferroelectric devices with superior uniformity and retention properties.
21 October 2024 in IEEE Electron Device Letters
In this study, we investigated the impact of overshoot current (I over ) on the reliability of selector-only memory (SOM) devices based on an ovonic threshold switch (OTS). We found that implementing a multi-step pulse during the write operation reduced I over by 40%, significantly decreased threshold voltage (V th ) variability during the read process to ensure sufficient read window margin, and improved endurance by more than an order of magnitude, compared to the traditional square pulse. Our analysis revealed that the I over leads to increased I on variability, which in turn causes greater variability in the write pulse’s impact on subsequent read process. Furthermore, I over generates extra injection charge, which directly correlating with increased device stress and significantly impacting endurance. Through intermittent and continuous pulse measurements, we confirmed the critical role of I over in cycling stability. Our findings underscore the importance of suppressing I over to enhance SOM reliability, emphasizing the need for optimizing the multi-step pulse method.
10 March 2025 in IEEE Electron Device Letters
In this study, we propose a method to generate a memory window enabling the ovonic threshold switch (OTS) operate as a selector-only memory(SOM) by doping Cu. Unlike conventional approaches that rely on internal modifications within the device, our method controls trap formation through the supply and migration of Cu via an external Cu electrode. To prevent the excessive supply of cations, which could lead to Cu conducting filament formation, we employed a series resistance and a C diffusion barrier. To demonstrate that the operation mechanism of this device is not based on Cu filamentary switching, we presented the bipolar switching behavior. We also identified a relationship among the memory window, leakage current, and retention, which varies depending on the write current. Furthermore, we analyzed changes in the trap density and activation energy to explain the threshold voltage variation caused by the traps. This work provides a pathway for OTS devices, previously incapable of achieving a memory window, to operate as SOM.
6 February 2024 in IEEE Transactions on Electron Devices
In this study, we focused on the electrical and reliability characteristics of a ferroelectric diode (FE diode) composed of an InGaZnO (IGZO)/Hf $_{\text{x}}$ Zr $_{\text{1-\text{x}}}$ O $_{\text{2}}$ (HZO) stack by controlling the bulk and interface defect of IGZO. Initially, to achieve the high ON/OFF ratio, we reduced the bulk defects in the IGZO film during deposition by adjusting the oxygen partial pressure. This strategy effectively reduced the OFF-state leakage current in the high-resistance state (HRS), as demonstrated by current–voltage ( I – $\textit{V}\text{)}$ characteristics and x -ray photoelectron spectroscopy (XPS) analysis. Subsequently, to enhance the endurance characteristics, we considered the application of microwave annealing (MWA) as an alternative to the conventional rapid thermal annealing (RTA) to decrease interface traps. Upon assessing interface trap densities, we confirmed an improved interface quality within double-layered structure. Consequently, the IGZO/HZO FE diode device exhibited a remarkable ON/OFF ratio of 4 $\times$ 10 $^{\text{5}}$ and cycling endurance of 10 $^{\text{10}}$ , underlining the importance of defect management in device performance.
15 April 2025 in IEEE Transactions on Electron Devices
In this study, we propose a high-performance and reliable ferroelectric capacitor based on HfxZr1-xO2 (HZO) integrated with an ultrathin multifunctional 2D-WS2 layer. The WS2 layer, positioned at the interface between the bottom electrode and HZO, serves a multiple function. First, the WS2 acts as a protective layer, effectively suppressing the formation of interfacial defects, such as oxygen vacancies and dead layers during the device fabrication process. Second, this layer functions as a seed layer, promoting the growth of vertically aligned HZO domain structures and enhancing the ferroelectric crystallinity of HZO. This approach addresses key limitations in conventional HZO, including interfacial instability, random domain distribution, and inconsistent switching behavior. Our experimental results reveal significant improvements in ferroelectric performance, achieving stable endurance exceeding 1012 cycles while maintaining a high remanent polarization (2Pr > 50 μC/cm2). Additionally, long-term retention performance is expected to exceed ten years at 85 ∘C. Furthermore, the integration of a WS2 interface layer demonstrates excellent device-to-device uniformity and consistency, even in nanoscale HZO device structures. This work provides new insights into the development of high-performance ferroelectric nonvolatile memory technology by highlighting the multiple advantages of the WS2 layer, which enhances interface stability and facilitates vertical domain alignment.