2 November 2018 in Science Advances
Ultralow-power organic wearable patches have been developed for all-day monitoring of heart rate and blood oxygen level.
20 November 2018 in Nature Communications
Hybrid perovskite semiconductors represent a promising platform for color-tunable light emitting diodes (LEDs) and lasers; however, the behavior of these materials under the intense electrical excitation required for electrically-pumped lasing remains unexplored. Here, we investigate methylammonium lead iodide-based perovskite LEDs under short pulsed drive at current densities up to 620 A cm−2. At low current density (J < 10 A cm−2), we find that the external quantum efficiency (EQE) depends strongly on the time-averaged history of the pulse train and show that this curiosity is associated with slow ion movement that changes the internal field distribution and trap density in the device. The impact of ions is less pronounced in the high current density regime (J > 10 A cm−2), where EQE roll-off is dominated by a combination of Joule heating and charge imbalance yet shows no evidence of Auger loss, suggesting that operation at kA cm−2 current densities relevant for a laser diode should be within reach.
6 November 2019 in Advanced Optical Materials
9 January 2019 in Nano Letters
1 February 2019 in Journal of Applied Physics
Catastrophic failure due to electrical shorting is currently one of the key reliability challenges for commercial organic light emitting diode (OLED) solid-state lighting panels. Here, we explore the origin of panel-killing shorts through the use of a temperature-selective electroluminescence imaging technique that allows us to locate them early in their life cycle and study their growth over time. We identify two general classes of panel defect, termed bright spots and hot spots, which respectively originate from indium-tin-oxide agglomerations and microscale organic semiconductor dust particles on the substrate. The former are largely benign, whereas the latter can lead to local shunts that grow over time and cause catastrophic failure. We understand the growth process as a self-reinforcing cycle, where shunt-induced heating volatilizes the surrounding organic semiconductor, which in turn expands the shunt and leads to even more heating. Based on these results, we identify several practical strategies to arrest the growth of early-stage shorts or prevent them entirely, which could reduce the cost and improve the reliability of OLED lighting.
16 January 2019 in ACS Photonics