23 February 2019 in Archives of Computational Methods in Engineering
1 January 2015 in Procedia CIRP
Engineering ceramics are becoming more and more important in the nowadays-industrial landscape. Thanks to the exceptional combination of good mechanical, thermal and chemical properties, they find applications in many industries. Nevertheless, the traditionally used manufacturing technologies for processing ceramics lack the ability to compete in a market of complex shaped components and customized solutions. Additive Manufacturing (AM) can provide an important contribution in this context, given the nearly unlimited freedom in design, and flexibility. This research specifically aims at developing an extrusion-based additive manufacturing technology using UV-curable dispersions. The homogeneity, rheology and printability of these dispersions, containing from 22,5%vol to 55%vol ZrO2 in different commercially available UV-resins were investigated. A sintered density of 92% was obtained for produced parts, proving the potential of the technology in development.status: publishe
1 January 2016 in Procedia CIRP
The quasi-static mechanical properties of Fused Deposition Modelling ABS parts are largely influenced by the quality of the interconnection between adjacent tracks and layers. During the process, coalescence of the interconnection is obtained through the thermal energy, present in the deposited material. The obtained coalescence is therefore strongly dependent on the temperature of the material and is therefore influenced by many factors related to the production process. However, the process parameters influencing this thermal history are often not monitored. Furthermore, when printing large batches in a single build, it is very difficult to control the process such that the optimal thermal history is obtained at every location in the build. Moreover, a profound knowledge on the influence of the thermal history on the coalescence of the interconnection between adjacent tracks is still lacking. This research is therefore aimed at investigating the influence between the inter-layer cooling time, i.e. the time between de deposition of two consecutive layers, and the resulting quasi-static mechanical properties, because this the latter is an important factor contributing to the temperature of the material at the moment of deposition of the next layer. Uniaxial test samples are built considering the build orientation and the number of parts in the envelope, in order to influence this inter-layer cooling time. Tensile tests are performed and the fracture surfaces are investigated using digital microscopy.status: publishe
29 May 2022 in Reliability Engineering & System Safety
1 August 2017 in Polymer Testing
1 March 2019 in Mechanical Systems and Signal Processing