1 January 2015 in Solar Energy Materials and Solar Cells
Here we present for the first time a TiO2/Cu2O all-oxide heterojunction solar cell entirely produced by spray pyrolysis onto fluorine doped tin oxide (FTO) covered glass substrates, using silver as a back contact. A combinatorial approach was chosen to investigate the impact of the TiO2 window layer and the Cu2O light absorber thicknesses. We observe an open circuit voltage up to 350mV and a short circuit current density which is strongly dependent of the Cu2O thickness, reaching a maximum of ~0.4mA/cm2. Optical investigation reveals that a thickness of 300nm spray pyrolysis deposited Cu2O is sufficient to absorb most photons with an energy above the symmetry allowed optical transition of 2.5eV, indicating that the low current densities are caused by strong recombination in the absorber that consists of small Cu2O grains
1 August 2017 in Polymer Testing
1 November 2016 in Case Studies in Nondestructive Testing and Evaluation
Laser Sintering (LS) is an Additive Manufacturing (AM) technology for polymers processing which is increasingly being used to produce functional products with designs not achievable with traditional manufacturing technologies. Lightweight cellular structures are a good example of complex designs which are increasingly finding applications in AM parts. However, it is not yet clear how the LS process affects the porosity and geometrical characteristics of the cell structural elements. Getting this information allows to perform quality control of the LS process, gives insights into how to improve it, and might help to take into account manufacturing process variability during the design phase.In this work a test artifact containing cylindrical elements with diameters in the range typically used in lightweight cellular structures is used to investigate the influence of features' size and printing orientation on the porosity and shape deviation of each feature. In order to assess the reproducibility of the process, several replicas of the test object are produced in polyamide-12 (PA12) using the same LS process conditions. An X-ray Computed Tomography (CT)-based quality control approach, which uses both image processing of CT-slices and porosity analysis (porosity content, pores count and pores volume distributions) is used to gather the information
1 April 2018 in Polymer Testing