3 April 2019 in Journal of Lightwave Technology
A 1×2 integrated four-mode power splitter based on multimode interference (MMI) is proposed and experimentally demonstrated for the first time. Three-dimensional (3D) simulation is used to optimize the core/cladding refractive index difference and the input waveguide position for the $\rm TE_{00}, TE_{01}, TE_{10}, and TE_{11}$ input waveguide modes. Minimum insertion loss (IL) and mode-dependent loss (MDL) of 0.1 dB and 0.2 dB are predicted, respectively. IL and MDL less than 1 dB can be maintained over a bandwidth of approximately 50 nm and 25 nm, respectively. The device was fabricated on $\rm SiO_2$ and experimentally characterized. The variation of the power splitting ratio for each mode is less than 0.4 dB over the full C-band, and the excess losses of the splitter for all four modes exceed the insertion loss of a straight waveguide by less than 1.85 dB.
13 January 2021 in Photonics Research
Non-mode-selective (NMS) multiplexers (muxes) are highly desirable for coherent power combining to produce a high-power beam with a shaped profile (wavefront synthesis) from discrete, phase-locked emitters. We propose a design for a multi-plane light conversion (MPLC)-based NMS mux, which requires only a few phase masks for coherently combining hundreds of discrete input beams into an output beam consisting of hundreds of Hermite–Gaussian (HG) modes. The combination of HG modes as a base can further construct a beam with arbitrary wavefront. The low number of phase masks is attributed to the identical zero-crossing structure of the Hadamard-coded input arrays and of the output HG modes, enabling the practicality of such devices. An NMS mux supporting 256 HG modes is designed using only seven phase masks, and achieves an insertion loss of , mode-dependent loss of 4.7 dB, and average total mode crosstalk of . Additionally, this design, featuring equal power for all input beams, enables phase-only control in coherent power combining, resulting in significant simplifications and fast convergence compared with phase-and-amplitude control.
29 July 2019 in Photonics Research
27 July 2020 in Journal of Lightwave Technology
We designed, fabricated, and tested a 90° optical hybrid using multiplane light conversion. The device supports an octave of bandwidth (900–1800 nm) in simulations. The measured phase errors are below 3° for free space output, and below 8° with a fiber array output, across a measurement bandwidth of 390 nm. The fully-packaged device (with input and output fiber arrays) has a measured insertion loss of 5.52 dB at 1550 nm. A high-speed transmission experiment with QPSK format was conducted to verify the performance of the fully-packaged device.
8 April 2020 in Optics Letters
We propose a Hermite–Gaussian (HG) mode-demulti-plexing hybrid (MDH) for coherent detection of mode-division multiplexed signals. The MDH, which performs multiple functionalities, including demultiplexing, local oscillator splitting, and optical 90-deg mixing, is realized based on the multi-plane light conversion technique. An isosceles right triangle output layout is employed to reduce the number of phase masks to fewer than the number of modes, significantly simplifying the construction of the MDH. A 10-Hermite–Gaussian (HG) mode MDH with only five phase masks is demonstrated by numerical simulation, achieving an insertion loss (IL) and mode dependent loss as low as and 1.7 dB, respectively. The IL was further reduced to through optimization of MDH parameters, such as the beam waists of the input HG modes and the output spots.