1 January 2020 in Ultrasonics Sonochemistry
Ultrasonic-assisted impregnation is used to synthesize physically modified garlic peel-based 3D hierarchical porous carbons (PCs), and the effect on PCs is investigated by changing ultrasonic time. The results show that ultrasonic waves can effectively peel off surface attachments of the carbonized product, so that activator has a better mass transfer process and create more active sites. The connectivity of 3D pore network is enhanced as well, so the structure and electrochemical properties of garlic peel-based porous carbon (GBPC) are improved. The ultrasonic disperser is used as an ultrasonic generator, specific conditions are as follows: ultrasonic frequency is 40 kHz, ultrasonic power is 500 W, and ultrasonic time is 0, 3, 6, and 9 min, respectively. With the increase of ultrasonic time, impurities again block the pore structure during dynamic movement, resulting in a decrease in electrochemical performance. Specifically, the performance of GBPC-6 is the most excellent, the specific surface area (SSA) increases from 2548 m2 g-1 to 3887 m2 g-1, the specific capacitance increases from 304 F g-1 to 426 F g-1 at a current density of 1 A g-1 in a two-electrode test system. Energy density and cycle performance are also improved at the same time, which are attributed to rational structure. In addition, the effectiveness of the strategy of ultrasonic-assisted synthesis has been confirmed on another precursor material-scallion, meaning that this work proposes a new and simple modification method for improving the performance of biomass-based PCs.
21 November 2019 in Scientific Reports
It is generally acknowledged that the activation method and component of the precursor are of great importance for making porous carbon. In this study, four plant materials belong to one genus were selected as optimized plant material to produce hierarchical porous carbon for supercapacitors, the influence of initial structure was discussed. All the produced porous carbons have large specific surface area (higher than 2342 m2 g−1), high microporosity (more than 57%), and high pore volume (larger than 1.32 cm3 g−1). All the samples show characteristic of electrical double layer capacitance, and the onion-based porous carbon obtain highest specific capacitance of 568 F g−1at the current density of 0.1 A g−1. With the current density rising from 1 A g−1to 50 A g−1, the specific capacitance only decreases for 20%. After 5000 cycles, all the samples show relatively high capacitance retention (up to 97%). Two-step acid pickling has washed most impurities and directly lead to small equivalent series resistance (lower than 0.2 Ω). The samples show high power density and energy density (71 W h kg−1@180 W kg−1, 210 kW kg−1@33 W h kg−1). This study open an avenue to create high-performance hierarchical porous carbon based on plant architecture.
8 October 2019 in Journal of Materials Science: Materials in Electronics
12 August 2019 in Journal of Materials Science
27 September 2024 in Journal of Energy Storage