31 March 2025 in IEEE Transactions on Applied Superconductivity
Due to the high critical current density and isotropic properties of stacked-tape high-temperature superconducting (HTS) conductors, they become potential candidates for fusion magnets. However, when used in fusion magnets, significant magnetization ac loss can generate heat, burden the cooling system, and even lead to quench. Therefore, evaluating and optimizing the magnetization ac loss of twisted stacked-tape cables (TSTCs) is crucial. The total magnetization ac loss of twisted stacked HTS cables was measured using the nitrogen boil-off method with various frame materials and twisting angles subjected to an alternating magnetic field, thereby optimizing the structure of TSTCs to reduce magnetization ac loss. In addition, twisted stacked-tape cables were simulated using a 3D T-A equation, whose results were compared with the measurements. This article comprehensively explained the effect of the twisting angle in magnetization ac loss, and proposed a new structure of the twisted stacked-tape conductor to further reduce magnetization ac loss. The novel structure design and optimization methods can be beneficial for designing future HTS conductors for fusion magnets.
22 December 2025 in IEEE Transactions on Applied Superconductivity
Stacked high-temperature superconducting (HTS) cables, with their high current-carrying capacity and high structural strength, show significant advantages in strong electric applications. However, in an alternating magnetic field environment, the conductors will generate AC losses, which can cause local overheating. Filamentary technology can effectively reduce the AC losses. This work investigates the magnetization and transport losses of stacked HTS cables based on multi-filamentary REBCO tapes. Results directly demonstrates the fact of the multi-filamentary structure in reducing magnetization loss. As the twist angle increased, magnetization losses first decreased and then stabilized. At low magnetic fields, the difference in magnetization loss between the original cable and the multi-filamentary cable is relatively small. Under higher magnetic fields, the magnetization loss of the original cable is significantly higher than that of the multi-filamentary cable. The transport losses of the multi-filamentary cable are always lower than those of the original cable. The optimization effect of filamentization on magnetization losses is significantly stronger than that on transport losses.