3 March 2025 in IEEE Transactions on Applied Superconductivity
This paper addresses the topic of modelling 2 G HTS tapes and coils, especially (but not limited to) Non-Insulated (NI) devices. We propose a novel 3D electromagnetic Volume Integral Formulation (VIM) for homogenized coils. This model combines the flexibility of distributed circuit models with the numerical approach of Finite Element Methods (FEM). It offers some distinctive features if compared to already available integral formulations (such as Partial Element Equivalent Circuit): first, it describes the current vector potential T with quadratic shape functions, resulting in non-constant current densities J inside mesh elements. Secondly, it allows for homogenization of coil turns, together with arbitrarily curved geometries. The results of the model are verified against a COMSOL simulation. The discussion of the model includes also a fast current-sharing calculation in case of overcurrent, with the aim of providing comprehensive heat losses, to then feed thermal models. This work can contribute in better describing and understanding the behavior of NI coils under most operative conditions, expanding the capability of testing and diagnosing these devices.
23 December 2024 in IEEE Transactions on Applied Superconductivity
Research for next-generation accelerators necessitates the development of high-field bending dipoles, which are critical for achieving precise beam control and optimizing efficiency. Among the promising superconducting materials is Nb$_\text{3}$Sn, which has already demonstrated its effectiveness in accelerator magnets, such as the MQXF quadrupoles used in the high-luminosity upgrade of the LHC. In collaboration with CERN, the Genoa and Milan divisions of INFN are spearheading the development of a 12-T Nb$_\text{3}$Sn dipole model configured in a cos-theta geometry, known as FalconD (Future Accelerator post-LHC Cos-theta Optimised Nb$_\text{3}$Sn dipole). This ambitious project focuses on pushing the limits of magnetic field strength and stability. A crucial component of this effort is the fabrication of high-performance coils, a task entrusted to the Italian company ASG Superconductors. This contribution provides an in-depth overview of the project's design considerations, including the coil architecture, material selection, and key technological challenges. Additionally, it discusses the fabrication process, testing methodologies, and future prospects for implementing these advanced dipoles in next-generation particle accelerators.
12 February 2026 in IEEE Transactions on Applied Superconductivity
This paper reports on the updated status and manufacturing results of the EuroSIG Superconducting dipole Demonstrator Magnet (SDM-c). The SDM-c is one of the key technologies for the next-generation European heavy-ion gantry and consists of a curved cos−θ NbTi dipole with a 30° magnetic length over a 1.65 m curvature radius and a 0.15 Ts−1 ramp-rate. We summarize the milestones reached in the last year, including the production of the curved dummy coil, employed to validate the manufacturing tooling and procedures, the production of the first curved NbTi coil, and the engineering and procurement of the mechanical structure, which was also complicated by the curvature. The results show that the project is in good track to prove the feasibility of the bending magnet concept. The paper includes a discussion of the remaining challenges for the final prototype magnet, which has a 45° magnetic length and a 0.4 Ts−1 ramp-rate.
16 December 2024 in IEEE Transactions on Applied Superconductivity
REBCO tapes stand out as the most promising conductors for various applications, spanning physics experiments and societal use. Manufactured through a now-consolidated yet intricate process, these tapes yield continuous pieces reaching hundreds of meters. However, this process limits the length of tape that can be wound into a coil without requiring internal splicing. Splices are inherently the weakest points in the coil due to heat generation and reduced current-carrying performance. While small non-insulated coils naturally self-protect against splice-related risks through current bypassing, larger coils, conduction-cooled, or partially insulated ones often experience a diminished self-protecting behaviour, necessitating careful consideration of splices in the coil design. Moreover, larger magnets often relies on multiple cable co-winding, making this issue more challenging to explore and to understand. To this purpose, this study aims at investigating various joint layouts for double tape HTS cable through electrical experiments. The manufacturing procedure, along with the measured performances of the different splice geometries produced using various brazing alloys and fluxes, is discussed. Finally, numerical models with lumped elements are utilized to analyse experimental results and to describe the joint behaviour. This work serves as an initial step toward a splice-inclusive design approach for magnets.
13 October 2025 in IEEE Transactions on Applied Superconductivity
The Falcon Dipole is a project led by the Italian Institute of Nuclear Physics (INFN), which aims tofabricate a 12 T short model of a Nb$_{3}$Sn cos-theta accelerator dipole as part of the High Field Magnet (HFM) R&D program at CERN [1]. The status of the project is at the fabrication step of the first dummy coil in the industry and, in this paper, the results of the first campaign of winding tests conducted in the industry are presented. The winding process for the Falcon Dipole is challenging because the size of the Rutherford Cable used for the coils is comparable to the bore radius. This results in high bending and torsion stresses, making the cable structure unstable. To address these challenges, the previous 3D model has been modified to improve the winding feasibility. The setup has been prepared to monitor technical parameters that will help in modeling the coil geometry and identifying sources of critical issues. In this paper, the outcomes of the winding campaign are reported and the proposed changes to the coil end design to address the issues that arose are discussed.
16 October 2025 in IEEE Transactions on Applied Superconductivity
The European I.FAST project’s Work Package 8 (WP8) initiative focuses on advancing Canted Cosine Theta (CCT) magnet technology using High-Temperature Superconductors (HTS). These magnets aim to revolutionize synchrotron and gantry designs by reducing their size and cost, offering transformative potential for research and hadron therapy. HTS materials enable higher magnetic fields and smaller cryogenic systems compared to Low-Temperature Superconductors (LTS). However, challenges such as cable production, magnet design, and cost-efficiency must be addressed. This work presents the design of a straight HTS CCT magnet capable of achieving a central dipole field of 4 T at an operating temperature of 20 K, using a cable configuration composed of two HTS tapes. A ramp rate of 0.4 T/s is targeted, with a lower initial ramp rate of 0.15–0.2 T/s deemed acceptable for early-stage development. The magnetic design was optimized to ensure high field quality under operational conditions. Heat extraction is managed through a closed-loop cooling system, with 20 K-helium gas flowing through channels digged directly in the body of the magnet. Thermal simulations demonstrate the effectiveness of this cooling approach, ensuring operational stability. Additionally, the paper highlights key assembly procedures and experimental tests conducted for qualifying critical fabrication steps, including cabling and winding. Results from these tests confirm the reliability and robustness of the developed methods, flooring the way for future HTS CCT magnet advancements. The progress presented here represents a significant step toward compact and efficient superconducting magnets, aligning with the project’s goal of fostering innovative solutions for next-generation synchrotrons and gantries.