The random variation sources have a significant influence on the performance of ferroelectric field-effect transistor (FeFET). In this work, comparative analysis on the process variation induced variability of FeFET towards a 7 nm technology node has been conducted, including different device structures from bulk to FDSOI and FinFET. The random ferroelectric/dielectric phase variation (PV), the metal work function variation (WFV) and the line-edge roughness (LER) effects are incorporated in TCAD simulations to quantitatively investigate their impacts on the threshold voltage variation. Especially, the Voronoi diagram is employed to realistically model the ferroelectric grain distributions and to accurately simulate the impact of PV on FeFET characteristics.
6 October 2017 in IEEE Transactions on Electron Devices
The operating voltage of a nanoelectromechanical (NEM) relay can be scaled down significantly using negative capacitance (NC), which is a unique property of ferroelectric materials. It has been observed that a ferroelectric capacitor can amplify the internal voltage of a device (higher than the externally applied voltage) by means of the NC effect. In this simulation work, depending on the structural parameters of a ferroelectric capacitor and an NEM relay, an NC + NEM relay (in which the gate electrode of the NEM relay is connected in series to the ferroelectric capacitor) was investigated. As a result, a sub-0.5-V operating voltage is theoretically estimated.
28 July 2023 in IEEE Transactions on Electron Devices
Machine learning (ML)-assisted compact modeling framework is proposed for design-technology co-optimization (DTCO) of W-doped indium oxide (IWO) channel transistor. The IWO transistor is modeled based on experimentally calibrated technology computer-aided-design (TCAD) simulations to generate datasets for neural network (NN) training and testing. The fit ML model is simulated under various structural parameters (gate length, and width) and voltage conditions (gate voltage and drain voltage). On the one hand, two NNs are designed for current–voltage ( I – V ) and capacitance–voltage ( C – V ) predictions, and after training and evaluation, the Python-based NNs with trained weights and biases are ported into a compact model based on Verilog-A format. The accuracy of ML-assisted compact model is verified by comparing the results from SPICE and TCAD mixed-mode simulations for back-end-of-line (BEOL) applications such as 3-D inverter and 2T gain cell memory. This ML framework introduces a new approach for the DTCO of emerging devices, providing an efficient and accurate method to model and optimize their behavior while significantly reducing design iterations and time consumption.
Three-dimensional AND-type architecture (3D AND) based on ferroelectric field-effect transistors (FeFETs) is proposed for the vector-matrix multiplication (VMM) of compute-in-memory paradigm. By leveraging a vertical string as one synaptic element, multibit weight with controllable linearity is realized due to parallel connection of cells in a string. Multibit input is also feasible with appropriate word line (WL) biasing. To guarantee the deep neural network performance, the device-level conductance distribution should be tightened. The phase variation of ferroelectric layer is regarded as a primary variation source, and its impact on the inference accuracy is examined.
31 March 2021 in IEEE Transactions on Electron Devices
Three-dimensional NAND architecture (3-D NAND) based on ferroelectric field-effect transistors (FeFETs) is explored for in-memory computing. In ferroelectric Hafnia-based polycrystalline thin film, which is deposited on the gate of the FeFETs, the monoclinic (M), and orthorhombic (O) phases coexist. These two phases of positional distribution introduce a read-out current variation in the 3-D NAND of FeFETs. Herein, we employ TCAD simulations to quantify such variation and optimize bias conditions for improving the accuracy of in-memory computing. Furthermore, the array-level impact of the phase variation on vector-matrix multiplication has been investigated using a 3-D netlist with SPICE simulations, indicating sufficient read-out accuracy possible for analog-to-digital conversion.
31 August 2022 in IEEE Transactions on Electron Devices
Since the discovery of ferroelectric properties in doped HfO2, various types of memory devices have emerged based on this novel material. Especially, the ferroelectric tunnel junction (FTJ) has gained considerable attention for selector-less crossbar array. Although various studies have been carried out for the HfO2-based FTJs, there are no investigations of them at a cryogenic temperature. While cryogenic memories are getting increasing attentions for diverse applications from high-performance computing to aerospace electronics, exploring the FTJ at cryogenic temperature is particularly interesting because it has been known for relatively poor retention characteristics and endurance at room temperature (RT). For the first time, we characterize the HfO2-based FTJ at cryogenic temperature down to 77 K. It was found that both the retention and endurance characteristics become greatly improved at 77 K. Furthermore, the read voltage was found to be critical for optimized performance in terms of ON-current, OFF-current, and their ratio at 77 K.