Chinsung Park

Chinsung Park

Auto-generated profile, based on publicly available information

Chinsung Park

School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 August 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
LFLance Fernandes
Lance Fernandes
PRPrasanna Venkatesan Ravindran
Prasanna Venkatesan Ravindran
TSTaeyoung Song
Taeyoung Song
DDDipjyoti Das
Dipjyoti Das
CPChinsung Park
Chinsung Park
AKAsif Khan
Asif Khan
We present an experimental study to compare the impacts of different dielectric materials - Al 2 O 3 and SiO 2 used as the tunnel dielectric layer (TDL) and the gate blocking layer (GBL) on the performance of ferroelectric gate stacks for NAND storage applications. We considered the maximum memory window (MW) and the incremental step program pulse (ISPP) slope as the key performance metrics. In a gate stack with TDL, Al 2 O 3 gives higher MW and ISPP performance than SiO 2 . However, in the GBL gate stack, SiO 2 has a higher MW and ISPP slope than Al 2 O 3 . With SiO 2 GBL, a maximum MW window of 8.3V was achieved, enabling quad-level cell (QLC) capability. We show that for a similar thickness, SiO 2 as GBL has the better MW performance, and Al 2 O 3 as TDL has a better ISPP performance. This study shows that TDL and GBL with appropriate dielectric material can be used as tuning knobs to achieve the desired ISPP and MW performance for ferroelectric NAND applications.

31 August 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
JHJae Hur
Jae Hur
CPChinsung Park
Chinsung Park
GCGihun Choe
Gihun Choe
PRPrasanna Venkatesan Ravindran
Prasanna Venkatesan Ravindran
AKAsif Islam Khan
Asif Islam Khan
SYShimeng Yu
Shimeng Yu
Since the discovery of ferroelectric properties in doped HfO2, various types of memory devices have emerged based on this novel material. Especially, the ferroelectric tunnel junction (FTJ) has gained considerable attention for selector-less crossbar array. Although various studies have been carried out for the HfO2-based FTJs, there are no investigations of them at a cryogenic temperature. While cryogenic memories are getting increasing attentions for diverse applications from high-performance computing to aerospace electronics, exploring the FTJ at cryogenic temperature is particularly interesting because it has been known for relatively poor retention characteristics and endurance at room temperature (RT). For the first time, we characterize the HfO2-based FTJ at cryogenic temperature down to 77 K. It was found that both the retention and endurance characteristics become greatly improved at 77 K. Furthermore, the read voltage was found to be critical for optimized performance in terms of ON-current, OFF-current, and their ratio at 77 K.

25 September 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
PVPrasanna Venkatesan
Prasanna Venkatesan
CPChinsung Park
Chinsung Park
TSTaeyoung Song
Taeyoung Song
LFLance Fernandes
Lance Fernandes
DDDipjyoti Das
Dipjyoti Das
AKAsif Khan
Asif Khan
We study the disturb characteristics of ferroelectric field-effect transistors (FEFETs) with band-engineered gate stacks. We demonstrate that integrating a dielectric Al 2 O 3 layer within the ferroelectric (FE) Hf 0.5 Zr 0.5 O 2 layer in the gate stack significantly enhances the memory window (MW), achieving levels suitable for quad-level cell operation (approximately 7.5 V) while operating at a reduced write voltage (below 15 V). Despite these improvements, the band-engineered FEFET exhibits similar pass disturb characteristics in the PGM state as a standard FEFET with an FE-only gate stack. To improve the disturb characteristics, we introduce and validate a periodic refresh-based disturb mitigation scheme, analogous to strategies employed in SSD controllers and flash memory managers for traditional charge trap flash-based NAND chips. This mitigation scheme reduces disturb in the PGM state from ~28% to approximately ~4% in the band-engineered FEFETs, enabling large memory window, lowdisturb operation.

20 December 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
DDDipjyoti Das
Dipjyoti Das
PRPrasanna Venkatesan Ravindran
Prasanna Venkatesan Ravindran
CPChinsung Park
Chinsung Park
NTNujhat Tasneem
Nujhat Tasneem
ZWZheng Wang
Zheng Wang
AKAsif Khan
Asif Khan
A major roadblock for the integration of ferroelectric-field-effect transistors (FEFETs) at advanced technology nodes for embedded memory applications is their high, logic-incompatible write voltages. Herein, we explore Ge as a channel material to reduce write voltage of FEFET and report the first demonstration of p-type Ge-FEFETs with record low write voltages of ±1.4 V with a memory window (MW) of 0.6 V at DC and write voltages of ±1.4 V, ±1.8 V and ±2.4 V for MW of 0.2 V, 0.5 V and 0.8 V for a write time of 10 $\mu \text{s}$ , respectively. The write voltages observed in Ge-pFEFETs are ~50% lower than that of a Si-pFEFETs when compared against iso-memory window condition [±2.5 V with a MW of 0.6 V at DC, ±3.5 V for MW of 0.5 V for a write time of 10 $\mu \text{s}$ ]. Such dramatic reduction of write voltages in Ge-pFEFETs is achieved due to the fact that the native oxide of Ge (GeOx), formed at the Ge interface, has a larger dielectric constant and lower thickness than those for SiO2 on the Si platform. In addition, the lower bandgap and higher dielectric constant of Ge may lead to a lower surface potential for a given semiconductor charge, leading to further reduction in the write voltage. Further, our Ge-pFEFETs show write endurance of 107 cycles (the best-in-class for Ge-pFEFETs, as reported in the literature), excellent data retention, and immediate read-after-write capability. Our results indicate the attractiveness of Ge platform for FEFETs for embedded memory applications.

25 December 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
PVPrasanna Venkatesan
Prasanna Venkatesan
LFLance Fernandes
Lance Fernandes
PRPriyankka Ravikumar
Priyankka Ravikumar
CPChinsung Park
Chinsung Park
HTHuy Tran
Huy Tran
AKAsif Khan
Asif Khan
We perform a comprehensive study of memory retention characteristics in ferroelectric field-effect transistors with different engineered gate stacks designed to achieve a large memory window (MW) for NAND storage application. Through this study, we show that the widely reported retention loss in these band-engineered FEFETs can be mitigated by optimizing the position of the dielectric insert. Specifically, placing the dielectric insert in the middle of the FE stack (tunnel dielectric layer, TDL) leads to excellent retention while increasing the MW to a quad-level-cell compatible level (≥ 7.5V). This enhanced retention is enabled by the potential wells at the TDL-FE interfaces that energetically secure the MW-enhancing charges and prevent their detrapping. In contrast, placing the dielectric insert on the gate side (gate blocking layer, GBL), while maximizing the MW, compromises retention due to the detrapping of the trapped charges at the GBL-FE interface through the GBL.

10 July 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
CPChinsung Park
Chinsung Park
HKHarshil Kashyap
Harshil Kashyap
DDDipjyoti Das
Dipjyoti Das
JHJae Hur
Jae Hur
NTNujhat Tasneem
Nujhat Tasneem
AKAsif Islam Khan
Asif Islam Khan
Strategies to reduce the interfacial oxide layer thickness in ferroelectric (FE) Hf $_{\text{0}.\text{5}}$ Zr $_{\text{0}.\text{5}}$ O $_{\text{2}}$ (HZO) metal-oxide-semiconductor capacitor (FE-MOS) structures on Ge and Si substrates were investigated by electrode engineering, as means to reduce the write voltage in FE field-effect transistors (FEFETs). When the gate metal in Ge FE-MOS capacitors is changed from W (control) to Pt/Ti, the coercive voltage is reduced from $\sim$ 2.5 to $\sim$ 0.9 V (a 66% reduction) along with a 64% increase in the capacitance consistent with an interfacial layer (IL) thinning. High-resolution scanning transmission electron microscopy (HR-STEM) reveals no visible IL with Pt/Ti electrodes in Ge FE-MOS, suggesting the scavenging of oxygen from the GeO $_{\textit{x}}$ IL by the Pt/Ti electrode. However, a much smaller reduction of the coercive voltage was observed on Si FE-MOS structures with Pt/Ti electrodes. In this study, it is demonstrated that IL thinning might provide a pathway to reduce the write voltage in FEFETs based on conventional semiconductor channel materials down to a logic-compatible level.