1 September 2018 in Heliyon
This research studied various types of packaging to prolong the shelf life of non-preservative white bread. Three types of blown film packages were used, i.e. a single LDPE layer incorporated with an oxygen scavenger, a single LDPE layer containing an oxygen absorber sachet, and three layers of LDPE laminated with O-nylon. The effects of modified packaging atmosphere, i.e. 5, 10, and 21 vol. % of oxygen in nitrogen balance, on the shelf life was also included. Characterization of the packaging films was carried out using several techniques, such as Oxygen Transmission Rate (OTR) and an optical microscopy. Headspace gases, microbial count, as well as physical appearance were used to evaluate the shelf life. The optical microscopic images showed that incorporating the oxygen scavenger into the plastic film produced small pores, contributing to a passive function of the films as their OTRs were significantly enhanced. However, the microbial growth on bread stored in those packages was suppressed, implying that the intermediate generated from scavenging reaction might act as a fungistatic. Even though the scavenging capability of the oxygen absorber sachet lasted only for 4 days, the fungi and mould development thereafter was still lower compared to the package without the sachet. The prolonging white bread shelf life was found to be primarily dependent on two factors. The package with a high oxygen barrier such three-layer films defeated microorganisms. With a low initial oxygen level of around 5% by volume, the bread shelf life could be prolonged up to 5-7 days.
7 July 2018 in ASEAN Journal of Chemical Engineering
This research investigated the possibility of using polymer blends of virgin andrecycled polypropylene (PP) for a motorcycle saddle application. Three differentrecycled PPs obtained from different sources contained carbon black (CB). Specimenswere prepared by injection molding for mechanical property testing and colorcharacterization whereas scraps from runners were used for thermal property testing. Itwas found that tensile and flexural properties of recycled PPs were better than those ofvirgin PP due to the fact that recycled PPs contained CB which is a reinforcing material.These properties were improved as the amount of recycled PP added increased. Sincerecycled PPs are strong materials, they are hence brittle resulting in lowering impactstrength and percent elongation. The recycled PP sources and compatibility betweenvirgin and recycled PPs strongly influence the blends' properties. The melt flow index ofthe blends increased as the amount of the recycled PP increased because of the shortpolymer chains of recycled PP resulting from earlier processing. Blending virgin PP withrecycled PP not only improves its properties, but also reduces raw material costs in therange of 5-13%. The advantage of open loop recycling is a wider recycled plasticmarket.
8 August 2024 in Biopolymers
NSNattapron Siribanluehan
1 January 2023 in Engineered Science
2 October 2026 in SSRN Electronic Journal
The development of low-cost and durable adsorbents for post-combustion CO₂ capture remains a critical challenge. In this study, zeolite LTA 5A was modified using aqueous ammonia (NH₄OH) and monoethanolamine (MEA) to examine how nitrogen-containing additives influence surface properties and CO₂ adsorption performance in both powder and granulated forms. Structural and physicochemical characterization (XRD, SEM–EDS, FTIR, BET, and CO₂-TPD) confirmed preservation of the zeolite framework after modification, while spectroscopic and desorption analyses indicated the introduction of nitrogen-containing functionalities. Considering the limitations of EDS for nitrogen quantification, correlations are drawn based on observable changes in surface chemistry and porosity. Functionalization reduced N₂-accessible surface area and pore volume but enhanced CO₂ affinity under dynamic conditions. In fixed-bed breakthrough experiments at ambient conditions with 5 vol.% CO₂, the NH₄OH-modified powder exhibited the highest dynamic capacity (8.8 mmol g⁻¹) and capture efficiency (68%), outperforming unmodified and MEA-treated samples. Additionally, the NH₄OH-functionalized adsorbent demonstrated stable cyclic performance over repeated adsorption–desorption cycles with minimal capacity loss. These results demonstrate that simple ammonia-based functionalization provides an effective and scalable strategy to enhance CO₂ capture performance and stability of zeolite 5A under practical operating conditions.