The strain measurement accuracy of aerospace hot end components is severely affected by the change of environmental temperature. How to reduce the apparent strain derived from temperature variation within a wide range still is of a great challenge hitherto. In this work, a self-compensated thin film strain gauge (SC-TFSG) with sensing resistor and suspended compensation resistor is developed. These two resistors are orthogonal to each other and form a half bridge measurement structure, which is used to reduce the apparent strain introduced by temperature changes. Results show that the temperature coefficient of resistance (TCR) of the SC-TFSG is only -136 ppm/°C within a wide temperature range from room temperature to 1200 °C. The thermal output is 89.52% lower than the strain gauges without compensation resistor. Furthermore, the results of the standard strain cyclic loading test at 600 °C, 800 °C, 1000 °C and 1200 °C indicate that the maximum error between the SC-TFSG measured values and the standard loading strain can be controlled within 6%. The work provides an effective method for strain measurement and accuracy compensation of hot end components in a wide temperature range.