18 March 2025 in Journal of Nuclear Materials
4 April 2025 in Journal of Nuclear Materials
17 August 2023 in Journal of Nuclear Materials
2 January 2025 in Journal of Applied Physics
The chemical interactions in Fe–HfH2 metal matrix composites (MMCs) are studied across multiple length scales to elucidate the decomposition of the parent phases and corresponding reaction zone physics during direct current sintering. Fe–HfH2 composites were synthesized with increasing as-mixed hydride contents of Fe–25% HfH2, Fe–40% HfH2, Fe–55% HfH2, and Fe–70% HfH2 (all in vol. %) to demonstrate the ability to achieve sintered MMCs with target hydride contents. Samples were probed across multiple length scales through a multi-modal workflow employing x-ray diffraction, scanning electron microscopy and segmentation analysis, and synchrotron techniques including hard x-ray fluorescence mapping and nanoprobe x-ray absorption near-edge structure measurements. Under the selected sintering temperature and pressure conditions, hydrogen evolution is seen to evolve through parallel paths: thermal decomposition from during the transformation of HfH2 to HfHx<2 and through subsequent reaction with the Fe matrix leading to intermetallic phase formation. Specifically, HfFe and HfFe2 intermetallic formation accelerates the release of hydrogen with a subsequent HfO2 phase forming at grain boundaries. For this MMC, the consumption or loss of hydrogen can be considerable in compacts with initial hydride loading of 25%–40% HfH2 approaching 83% hydrogen loss for the lower volume fraction composites. Increasing the volume fraction of HfH2 to 70% enhanced the retained hydrogen content to 53% and attributed to the reduced interfacial area intrinsic to the increased HfH2 loading in this MMC.
4 August 2026 in SSRN Electronic Journal
The long-term performance of high-level radioactive waste repositories is strongly influenced by the thermal and hydraulic behavior of engineered barrier materials. Bentonite is widely employed as a buffer and backfill material because of its low permeability and swelling capability; however, its low thermal conductivity can limit repository loading density and increase peak canister temperatures. This work demonstrates bentonite–graphite composites as an engineered barrier material designed to simultaneously improve repository thermal management and provide a beneficial reuse pathway for nuclear graphite waste. Composites containing up to 50 wt.% crushed graphite were fabricated and characterized using hydraulic conductivity measurements, thermal property evaluation, X-ray computed tomography, and phase analysis. Increasing graphite content beneficially reduced hydraulic conductivity by more than two orders of magnitude while also enhancing thermal conductivity by a factor of three relative to the bentonite baseline. XCT analysis revealed that graphite addition modifies pore connectivity and transport tortuosity, reducing preferential water-flow pathways while promoting heat-transfer pathways through the composite. Such composites were also fabricated with neutron irradiated graphite. Those composites exhibited lower thermal conductivity than their non-irradiated counterparts attributable to a minor increase in porosity, but nevertheless maintained superior thermal performance compared with pure bentonite. As described, the inclusion of crushed graphite modifies the pore architecture of bentonite, simultaneously reducing hydraulic conductivity and establishing thermally conductive pathways, and these advantages are retained even after neutron irradiation. The results demonstrate that bentonite-graphite composites offer a promising strategy for improving engineered barrier performance while simultaneously providing a high-volume disposal pathway for graphite waste without the need for a dedicated repository. These findings support further evaluation of graphite-enhanced bentonite materials for next-generation repository concepts with increased thermal loading requirements.
18 June 2026 in SSRN Electronic Journal
The hydrogen retention and structural stability of sub-stoichiometric yttrium hydrides (YHx, x < 2) were investigated to assess their stability as solid moderators for advanced microreactors. Disk specimens with H/Y ratios of 1.69 and 1.83 were subjected to neutron irradiation in the High Flux Isotope Reactor (HFIR) to doses up to 2.0 dpa at temperatures between 525‑660 °C. Post-irradiation examination was performed using electron backscatter diffraction (EBSD) and high-energy synchrotron X‑ray diffraction (XRD). EBSD mapping confirmed that the material is polycrystalline, with no evidence of macroscopic texture gradients across the sampled region. Synchrotron XRD measurements, performed in transmission mode, revealed dominant face‑centered cubic δ‑YH2 reflections after irradiation, whereas the metallic hexagonal close packed α‑Y peaks were substantially suppressed and broadened relative to the unirradiated condition. The persistence of strong hydride signatures indicates substantial hydrogen retention despite elevated irradiation temperatures and neutron fluence. The lattice parameter of the hydride phase remained unchanged after irradiation, demonstrating structural stability under investigated conditions. Williamson‑Hall analysis further showed the coexistence of finite domain size and measurable lattice microstrain, indicating defect-mediated lattice distortions without disruption of the underlying crystal structure. These results demonstrate that hydrogen retention in irradiated YHx is governed by the interplay between irradiation conditions, defect trapping and redistribution within a thermodynamically stable hydride lattice, highlighting the importance of accounting for local hydrogen heterogeneity in the design of next-generation hydride moderators.