Thin film Cu(In,Ga)Se2 solar cells with ALD-deposited Zn1-xSnxOy buffer layers were fabricated and the solar cell properties were investigated for varying ALD deposition temperatures in the range from 90 °C up to 180 °C. It was found that a process window exists between 105 °C and 135 °C, where high solar cell efficiency can be achieved. At lower ALD deposition temperatures the solar cell performance was mainly limited by low fill factor and at higher temperatures by low open circuit voltage. Numerical simulations and electrical characterization were used to relate the changes in solar cell performance as a function of ALD deposition temperature to changes in the conduction band energy level of the Zn1-xSnxOy buffer layer. The Zn1-xSnxOy films contain small ZnO or ZnO(Sn) crystallites (~10 nm), resulting in quantum confinement effects influencing the optical band gap of the buffer layer. The ALD deposition temperature affects the size of these crystallites and it is concluded that most of the changes in the band gap occur in the conduction band level
This paper presents the latest survey results for the calendar year 2023 concerning PV markets and policies, as well as other key issues. An increasing number of national markets experienced notable growth in 2023, with impacts on policy development. The global PV market grew to at least 350 GWp in 2023, compared to 236 GWp in 2022. This represents a year-on-year growth of more than 48%. Some estimations mention up to 380 GWp. Asia scored the very first place again in 2023 with China (200 GWp), India (10 GWp), Japan (6.6 GWp) and more appearing in the top markets. With around 33 GWp deployed this year, the market in USA. The market in EU grew significantly to around 56 GWp. The top countries are Germany (14GWp), Spain (8.2GWp) and Italy (4.8GWp). Fast development was observed once again in Latin America, with around 10 GWp installed in Brazil. • The global installed capacity reached over 1,500 GW in 2023 and 2 TW milestone will be achieved faster than previously expected. Production capacities have significantly increased in 2023, in particular upstream (polysilicon and wafer) and will keep on increasing in 2023. And excess capacity of polysilicon significantly contributed PV module price reduction China remains the main manufacturing hub worldwide, by far. Larger wafers and larger modules continue their dominance on the market, with 182 mm and 210 mm wafers established as the new standards, with 166 mm disappearing. Bottlenecks of various materials were reported in 2023, for example encapsulants, highly pure quartz sand for crucibles and shortage of Cu cables. The Global PV industry needs to address these resources issues and more sustainable production for the TW market.