Herman Jalli Ng

Herman Jalli Ng

Auto-generated profile, based on publicly available information

Herman Jalli Ng

Faculty of Electrical Engineering and Information Technology, Karlsruhe University of Applied Sciences, Karlsruhe, Germany

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2017 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
HNHerman Jalli Ng
Herman Jalli Ng
MKMaciej Kucharski
Maciej Kucharski
WAWael Ahmad
Wael Ahmad
DKDietmar Kissinger
Dietmar Kissinger
This paper describes a multi-purpose radar system suitable for applications with different requirements on dynamic range, resolution, and miniaturization degree. It utilizes a scalable sensor platform that includes a wideband 30.5-GHz voltage-controlled oscillator (VCO) as well as 61- and 122-GHz transceivers (TRXs) in a silicon-germanium BiCMOS technology. The proposed architecture enables the cascading of multiple TRXs and allows the implementation of MIMO radar systems in two different frequency bands by using a single VCO. The higher transmit output power of 11.5 dBm as well as receive gain of 24 dB make the 61-GHz TRX suitable for applications requiring a high dynamic range. The lower wavelength allows the integration of on-chip antennas in the 122-GHz TRX and enables, thus, a high miniaturization degree. The higher LO scaling factor makes the 122-GHz TRX also more attractive for high-resolution applications. A sweep bandwidth of 2.5 GHz generated by the VCO is scaled up to 10 GHz and results in a range resolution of 3 cm. The proposed TRXs are equipped with binary phase shift keying modulators as well as an I/Q receiver and can be utilized to build a flexible software-defined radar platform for range and distant-selective vibration sensors utilizing frequency-modulated continuous wave as well as pseudo-random noise radar techniques.

1 December 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
WAWael Abdullah Ahmad
Wael Abdullah Ahmad
MKMaciej Kucharski
Maciej Kucharski
AEArzu Ergintav
Arzu Ergintav
SASalah Abouzaid
Salah Abouzaid
JWJan Wessel
Jan Wessel
DKDietmar Kissinger
Dietmar Kissinger
This article demonstrates the implementation of 80- and 160-GHz four-channel radar sensors employing the modular scalable platform based on a single relaxed 40-GHz local oscillator and cascadable transceiver chips. The first two channels synthesize 2 x 2 multiple-input-multiple-output (MIMO) radar at 80 GHz with onboard 8 x 1 patch arrays for enhanced angular resolution, whereas the other two channels employ 160-GHz system-on-chip transceivers with integrated wideband 6-dBi micromachined on-chip antennas for enhanced range resolution. Configurable modulators in each transceiver offer ranging, direction-of-arrival (DoA) estimation, velocity/vibrations measurement, and data communication applications. Frequency-modulated continuous wave (FMCW) is demonstrated with 4-/8-GHz sweep bandwidth at 80/160 GHz corresponding to 3.75-/1.875-cm range resolution. Chirp-sequence FMCW is employed to measure the heartbeat rate of a human, and 78 bpm is measured with 0.06-Hz Doppler resolution. Mechanical vibration rate from a loudspeaker is measured using the CW radar technique, whereas phase-modulated continuous wave is employed for distant selective vibrations measurement. Time-division multiplexing MIMO radar is configured at 80 GHz in a multitarget scenario for DoA estimation, and the targets are distinguished with 25° effective angular resolution. Frequency-division multiplexing MIMO radar technique is demonstrated based on Δ Σ-modulation and binary phase shift keying (BPSK) modulators. Furthermore, the 10-Mb/s BPSK data communication link is evaluated at 80 GHz with a 20-dB signal-to-noise ratio at 1 m. The 160-GHz vector modulators offer additional modulations.

11 December 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MKMaciej Kucharski
Maciej Kucharski
WAWael Abdullah Ahmad
Wael Abdullah Ahmad
HNHerman Jalli Ng
Herman Jalli Ng
DKDietmar Kissinger
Dietmar Kissinger
This article presents G-band monostatic and bistatic radar transceivers (TRX) incorporating on-chip antennas for short-range high-precision applications. The circuits were fabricated using a silicon-germanium (SiGe) BiCMOS technology offering heterojunction bipolar transistors (HBTs) with fT/fMAX of 300/500 GHz. The monostatic TRX implements a tunable leakage canceller (LC) for enhanced transmitter (TX)-to-receiver (RX) leakage compensation and hence improved detectability of weakly reflecting near targets. A standalone monostatic TRX characterized at on-wafer level achieves 4-dBm maximum output power (PTX) and 19-dB peak conversion gain (GRX) with 3-dB bandwidths of 18 and 17,GHz for the TX and the RX, respectively. The bistatic version reaches PTX of 13 dBm and GRX of 24 dB expanding the 3-dB bandwidths to 32 and 34 GHz for the TX and RX, respectively. A double-folded dipole antenna providing 5-dBi gain at 170 GHz was implemented using localized backside etching (LBE) and integrated with the transceivers. A frequency-modulated continuous-wave (FMCW) radar demonstrator incorporating an external phase-locked loop (PLL) was built to evaluate both TRXs and tunable leakage cancellation feature available in the monostatic variant. The maximum equivalent isotropic radiated power (EIRP), including on-chip antennas, is 8 and 18 dBm for the monostatic and bistatic TRX, respectively. The radars support sweep bandwidth up to 20 GHz reaching 2.1 cm spatial resolution. For a target at 1 m distance the measured ranging precision is 105 μm and 13 μm for monostatic and bistatic TRX, accordingly. Activation of leakage cancellation effectively suppresses close-in noise and extends the minimum detectable range remarkably.

28 April 2014 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
HNHerman Jalli Ng
Herman Jalli Ng
RFReinhard Feger
Reinhard Feger
ASAndreas Stelzer
Andreas Stelzer
This paper describes a fully-integrated 77-GHz ultra-wideband pseudo-random noise (PRN) radar transceiver in a Silicon-Germanium technology. The transceiver is equipped with a programmable pseudo-random binary sequence (PRBS) generator, which is realized in a current-mode logic topology and can be operated with a clock rate of up to 4.25 GHz to enable a range resolution of 3.5 cm. The signal generation unit is simplified by including a frequency multiplier to create a 76.5-GHz carrier signal from a single 4.25-GHz input, that is also used as a clock for the PRBS generator. The transceiver achieves a phase noise of -105.3 dBc/Hz at 1-MHz offset frequency, a transmit output power of 6.2 dBm, a receive gain of 24 dB and an input-referred 1-dB compression point of -14 dBm. Track&hold circuits included in the receive path allow the use of a sub-sampling technique to reduce the IF data rate down to 1 MHz. Radar measurements with two PRN transceivers with different primitive polynomials were done concurrently to show a fundamental function of the programmable PRBS generator. Radar measurements with the PRN and the frequency-modulated continuous-wave (FMCW) principles show comparable results and the PRN radar proves to be a real alternative to the FMCW radar.

22 June 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
MKMaciej Kucharski
Maciej Kucharski
MEMohamed Hussein Eissa
Mohamed Hussein Eissa
AMAndrea Malignaggi
Andrea Malignaggi
DWDefu Wang
Defu Wang
HNHerman Jalli Ng
Herman Jalli Ng
DKDietmar Kissinger
Dietmar Kissinger
This paper presents two D-band frequency quadruplers (FQs) employing different circuit techniques. First FQ is a 129–171-GHz stacked Gilbert-cell multiplier using a bootstrapping technique, which improves the bandwidth and the conversion gain with respect to the conventional topology. Stacked architecture enables current reuse for the second frequency doubler resulting in a compact and energy-efficient design. The circuit reaches 3-dB bandwidth of 42 GHz, which is the highest among similar reported quadruplers. It achieves 2.2-dBm saturated output power, 5-dB peak conversion gain, and 1.7% peak DC-to-RF efficiency. The stacked FQ occupies 0.08 mm 2 and consumes 22.7 mA from 4.4-V supply. Second presented circuit is a transformer-based injection-locked FQ (T-ILFQ) employing an E-band push–push voltage-controlled oscillator (PP-VCO). The VCO is a self-buffered common-collector Colpitts oscillator with a transformer formed on emitter inductors. Proposed configuration does not reduce the tuning range of the VCO, thus providing wide locking range and high sensitivity with respect to the injected signal. The T-ILFQ achieves 21.1% locking range, which is the highest among other reported injection-locked frequency multipliers. The peak output power is −4 dBm and the input sensitivity reaches −22 dBm. The circuit occupies 0.09 mm 2 and consumes 14.8 mA from 3.3-V supply.

4 May 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
HNHerman Jalli Ng
Herman Jalli Ng
DKDietmar Kissinger
Dietmar Kissinger
This paper describes a highly miniaturized two-channel radar sensor with integrated on-chip folded dipole antennas that exhibit high antenna gain and radiation efficiency due to the use of the selective localized backside etching technique. The sensor can be utilized in single-input multiple-output radar system by combining the two transmit channels to increase the effective isotropic radiated power by 6 dB. This results in an improved standard deviation of range measurements by a factor of 2. The transceiver (TRX) is equipped with binary phase shift keying modulators as well as I/Q receivers and can be utilized in multiple-input multiple-output (MIMO) radar system using time and delta-sigma modulator-based frequency division multiplexing technique. The angular resolution is improved by a factor of 1.5 by the introduction of an additional virtual array element in the MIMO radar system. The TRX also includes a 30-GHz VCO that is complemented with a prescaler and frequency quadrupler to generate a 120-GHz carrier signal. Radar measurements using the digital-beamforming method with 10-GHz modulation bandwidth were performed to show the applicability of the proposed system.