This article demonstrates a fully integrated broadband four-channel phased array transceiver, capable of wireless data rates up to 200 Gb/s covering the entire $D$ -band (110–170 GHz). The circuit is developed in a 130-nm SiGe BiCMOS technology, featuring ${f}~_{\text {t}}/{f}~_{\text {max}}$ of 300/500 GHz, and includes localized back-side etching-based ON-chip patch antennas. In both transmit and receive modes, direct up- and down-conversions are performed by in-phase and quadrature mixers driven by a multiplier-by-four local oscillator chain. A bidirectional true time delay circuit, with a resolution of 0.446 ps, which is equivalent to the accuracy of a 4-bit phase shifter, provides the squint-free beam-steering capability. Beam-steering measurements show how the beam can be steered from −45° to 45° in a 7° step. The transceiver achieves a 3-dB baseband bandwidth of 30 and 27 GHz in the transmit and receive modes, respectively. A wireless link demonstration is performed by mounting two chips on printed circuit boards, one in the transmit and one in the receive mode, together with plastic lenses on both sides, at a distance of 15 cm. Hardware-in-the-loop measurements show record data rates of 180 Gb/s with EVM of 12.2% using 16-QAM and 200 Gb/s with 8.3% EVM using 32-QAM. The four-channel transceiver consumes 1.95 and 2.5 W in the receive and transmit modes, respectively, which correspond to power efficiencies of 9.75 pJ/bit in the receiver mode and 12.5 pJ/bit in the transmitter mode.
1 December 2020 in IEEE Transactions on Microwave Theory and Techniques
This article demonstrates the implementation of 80- and 160-GHz four-channel radar sensors employing the modular scalable platform based on a single relaxed 40-GHz local oscillator and cascadable transceiver chips. The first two channels synthesize 2 x 2 multiple-input-multiple-output (MIMO) radar at 80 GHz with onboard 8 x 1 patch arrays for enhanced angular resolution, whereas the other two channels employ 160-GHz system-on-chip transceivers with integrated wideband 6-dBi micromachined on-chip antennas for enhanced range resolution. Configurable modulators in each transceiver offer ranging, direction-of-arrival (DoA) estimation, velocity/vibrations measurement, and data communication applications. Frequency-modulated continuous wave (FMCW) is demonstrated with 4-/8-GHz sweep bandwidth at 80/160 GHz corresponding to 3.75-/1.875-cm range resolution. Chirp-sequence FMCW is employed to measure the heartbeat rate of a human, and 78 bpm is measured with 0.06-Hz Doppler resolution. Mechanical vibration rate from a loudspeaker is measured using the CW radar technique, whereas phase-modulated continuous wave is employed for distant selective vibrations measurement. Time-division multiplexing MIMO radar is configured at 80 GHz in a multitarget scenario for DoA estimation, and the targets are distinguished with 25° effective angular resolution. Frequency-division multiplexing MIMO radar technique is demonstrated based on Δ Σ-modulation and binary phase shift keying (BPSK) modulators. Furthermore, the 10-Mb/s BPSK data communication link is evaluated at 80 GHz with a 20-dB signal-to-noise ratio at 1 m. The 160-GHz vector modulators offer additional modulations.
11 December 2020 in IEEE Journal of Solid-State Circuits
This article presents G-band monostatic and bistatic radar transceivers (TRX) incorporating on-chip antennas for short-range high-precision applications. The circuits were fabricated using a silicon-germanium (SiGe) BiCMOS technology offering heterojunction bipolar transistors (HBTs) with fT/fMAX of 300/500 GHz. The monostatic TRX implements a tunable leakage canceller (LC) for enhanced transmitter (TX)-to-receiver (RX) leakage compensation and hence improved detectability of weakly reflecting near targets. A standalone monostatic TRX characterized at on-wafer level achieves 4-dBm maximum output power (PTX) and 19-dB peak conversion gain (GRX) with 3-dB bandwidths of 18 and 17,GHz for the TX and the RX, respectively. The bistatic version reaches PTX of 13 dBm and GRX of 24 dB expanding the 3-dB bandwidths to 32 and 34 GHz for the TX and RX, respectively. A double-folded dipole antenna providing 5-dBi gain at 170 GHz was implemented using localized backside etching (LBE) and integrated with the transceivers. A frequency-modulated continuous-wave (FMCW) radar demonstrator incorporating an external phase-locked loop (PLL) was built to evaluate both TRXs and tunable leakage cancellation feature available in the monostatic variant. The maximum equivalent isotropic radiated power (EIRP), including on-chip antennas, is 8 and 18 dBm for the monostatic and bistatic TRX, respectively. The radars support sweep bandwidth up to 20 GHz reaching 2.1 cm spatial resolution. For a target at 1 m distance the measured ranging precision is 105 μm and 13 μm for monostatic and bistatic TRX, accordingly. Activation of leakage cancellation effectively suppresses close-in noise and extends the minimum detectable range remarkably.
9 September 2019 in IEEE Antennas and Wireless Propagation Letters
This letter demonstrates different planar highly efficient on-chip antennas at 165 GHz with high gain utilizing a standard Silicon-Germanium (SiGe) BiCMOS process with a localized backside etching (LBE) feature that allows cutting air trenches in the silicon. Dipole antenna, folded dipole antenna with air trenches around the radiator, and single-ended patch antenna with air trenches at the radiating edges are designed, fabricated and characterized in the D-band (110-170 GHz). The geometry of each individual antenna and the LBE air trenches are optimized to meet both process reliability specifications and radiation performance simultaneously. Metal fillings effects on the radiation pattern and matching are also studied.
23 May 2019 in IEEE Transactions on Microwave Theory and Techniques
This paper presents a scalable E-band radar platform based on single-channel fully integrated transceivers (TRX) manufactured using 130-nm silicon-germanium (SiGe) BiCMOS technology. The TRX is suitable for flexible radar systems exploiting massive multiple-input-multiple-output (MIMO) techniques for multidimensional sensing. A fully integrated fractional-N phase-locked loop (PLL) comprising a 39.5-GHz voltage-controlled oscillator is used to generate wideband frequency-modulated continuous-wave (FMCW) chirp for E-band radar front ends. The TRX is equipped with a vector modulator (VM) for high-speed carrier modulation and beam-forming techniques. A single TRX achieves 19.2-dBm maximum output power and 27.5-dB total conversion gain with input-referred 1-dB compression point of -10 dBm. It consumes 220 mA from 3.3-V supply and occupies 3.96 mm² silicon area. A two-channel radar platform based on full-custom TRXs and PLL was fabricated to demonstrate high-precision and high-resolution FMCW sensing. The radar enables up to 10-GHz frequency ramp generation in 74-84-GHz range, which results in 1.5-cm spatial resolution. Due to high output power, thus high signal-to-noise ratio (SNR), a ranging precision of 7.5 μm for a target at 2 m was achieved. The proposed architecture supports scalable multichannel applications for automotive FMCW using a single local oscillator (LO).
30 September 2022 in IEEE Transactions on Microwave Theory and Techniques
This article proposes a fully integrated single-channel bistatic frequency-modulated continuous-wave (FMCW) radar transceiver (TRX) that operates at a center frequency of 256 GHz. The main focus of this work is to realize a wideband and efficient radar TRX that offers high resolution of target detection in the short-range FMCW radar sensing application. The radar TRX chip is designed and manufactured using the 130 nm silicon – germanium (SiGe) bipolar complementary metal-oxide-semiconductor (BiCMOS) technology which offers heterojunction bipolar transistors (HBTs) with $f_\mathbf{T}/f_\mathbf{MAX}$ of 300/500 GHz. The transmitter (TX) of the radar TRX is based on a fundamentally operated multiplier-by-8 chain architecture that offers a 3-dB bandwidth of around 65 GHz with a saturated output power of -5.4 dBm. On the other hand, the receiver (RX) is based on a subharmonic architecture that provides a conversion gain (CG) of 10.4 dB with an average noise figure (NF) of 23.5 dB. This TRX is realized with two integrated on-chip folded dipole antennas. The antenna offers high antenna gain and radiation efficiency due to the use of the selective localized backside etching (LBE) technique. This chip consumes 305 mW of power from a 3.3-V supply and occupies a silicon area of 3.3 mm $^2$ . The radar range measurement is performed in an anechoic chamber, and it shows the maximum dynamic range (DR) of around 34 dB at 1-m range of the target.