25 August 2021 in Energy Systems
9 July 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The recommended paper established a new technique for regulating the amplitude of line-line voltage of voltage source converter (VSC) with standalone linear or non-linear load by using the concept of restrictive control set model predictive control (RCS-MPC). Conventionally, the line-line voltage is regulated by regulating the amplitude modulation ratio (ma) in sinusoidal pulse width modulation (SPWM) technique. However, the total harmonic distortion (THD) increases with the decrease in ma. Moreover, the conventional approach also has some restraint in the large settling time. This problem is addressed by suggesting RCS-MPC for controlling the amplitude of line-line voltage of VSC. Through RCS-MPC the value of slider gain in the cost function is adjusted accurately to regulate the output line-line voltage. The proposed approach increases the linear region from 0.612 to 0.648, limits the THD of output voltage below 5% during the variation of output voltage from zero to the maximum value. From the proposed approach, settling time reduces from 0.035 s to a minimum of 0.005 s. The use of the restricted control horizon ensures a low computational load by undergoing the computational time complexity analysis of MPC algorithm. The stability analysis is performed using the phase portrait and the affect of parameter variation is also discussed. The practicability of the recommended method is verified by MATLAB/ Simulink and it is also verified experimentally.
29 May 2025 in IEEE Transactions on Consumer Electronics
Low voltage direct current (LVDC) system with photovoltaic (PV) source typically contains multiple converters that are used to control the power flow from the PV array to DC loads leading to less end-to-end efficiency, control complexity, reliability issues, voltage regulation challenges, compactness issues, and increased system cost. In this paper, a new power flow architecture is designed for LVDC system that directly connects the PV array to consumer electronics (rated at 24 V) and employs only one front-end bidirectional DC-DC converter between the 24 V load line and the 48 V bus. The bi-directional converter manages load line voltage regulation through a 48 V bus. Under normal conditions, the PV array powers the load while seeking minimal support from the 48 V bus via bi-directional converter, while extensive power is drawn only when the PV output is insufficient for the load requirement, ensuring differential power processing. By introducing a unique power flow layout with a simple design and eliminating intermediate converters, this architecture offers superior end-to-end efficiency, simplified control, and greater reliability compared to previous solutions. To assess theoretical efficiency, a mathematical model of the proposed architecture is also developed. Simulation tests have been conducted, which validate the fundamentals of proposed architecture and indicate its efficiency over 95 % under normal weather conditions. Moreover, the comparative analysis confirms the superior capability of proposed architecture over existing ones. Finally, the functionality of the proposed architecture is verified by experimental prototype.
9 June 2025 in Electric Power Systems Research
11 August 2025 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
The modeling and control of grid-connected or islanded inverters often rely on conventional PI controllers, whose fixed values of proportional (Kp) and integral gains (Ki) limit their transient response performance. This paper addresses these limitations by implementing fractional-order PI (FOPI) controllers, enhanced through the Modified-Stability Boundary Locus (M-SBL) technique, which approximates fractional terms as integer-order equivalents for greater control precision. A generalized model of the inverter is developed with optimized fractional orders determined using Particle Swarm Optimization (PSO), achieving 76.45% reduction in controllers error compared to conventional PI controllers within 20 iterations. A small-signal model further improves simulation speed by nearly six times over the nonlinear model. Stability is analyzed through the eigenvalue method and the Lyapunov direct method. Such analysis confirms asymptotic stability and provides insights into system damping and dynamics. Experimental validation via a real-time simulator (OPAL-RT) under dynamic conditions demonstrates the robustness and practical applicability of the proposed model, with better transient response and error minimization.
1 October 2026 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics