9 January 2025 in IEEE Transactions on Instrumentation and Measurement
The manufacturing accuracy of freeform surface is limited by its detection accuracy. In this paper, a laser differential confocal freeform surface shape measurement method based on translational motion error monitoring and compensation is proposed. This method realizes helical scanning measurements of a freeform surface via sensor translation and freeform surface rotation. Based on normal tracking principle, a position-sensitive detector is used to track the normal direction, solving the problem of large inclination freeform surface measurements limited by the maximum measurable inclination of the sensor. The laser differential confocal sensor is used to precisely focus of the surface, realizing a high-spatial-resolution measurement of the surface normal vector, with an axial resolution of up to 1 nm. By introducing a reference frame into the system, an independent translational motion reference is provided for freeform surface measurement. By monitoring, decoupling and compensating the 2D translational motion errors, the impact of these errors on measurement accuracy is greatly reduced. High-accuracy freeform surface shape measurement is finally realized. The experimental results show that after error compensation, the PV repeatability is superior to ±50 nm (3σ), RMS repeatability is superior to ±14 nm (3σ), and the measurement results are close to the standard values, enabling high-accuracy measurement of freeform surface shapes.
3 October 2025 in IEEE Transactions on Instrumentation and Measurement
To accomplish ultra-precise non-contact scanning of freeform, this paper proposes a technique for measuring normal vectors using differential confocal absolute position triggering (NDCAPT), and using the accurately obtained normal vector (NV) to reconstruct the freeform under test (FUT) profile. Firstly, the absolute zero position of laser differential confocal (LDC) is used to trigger the position-sensitive detector (PSD) to collect the spot centroid position (SCP) at the focus, eliminating the influence of the defocus of sampling point (SP) on the SCP. Secondly, a defocus distance estimation model based on proximal policy optimization (PPO) to analysis of the light spot is established. Through deep learning to track the profile of freeform to improve the scanning efficiency. Finally, a NV reconstruction model of freeform is constructed. Based on the high precision NVs measured, the profile of freeform can be accurately reconstructed. The preliminary experimental results show that the profile measurement accuracy of this method is better than ±50 nm. By implementing precision NV metrology, it is possible to realize high-precision inspection of freeform, and reduces the demand for high precision reference monitoring framework and displacement measurement methods in the profile measurement of freeform.