Nujhat Tasneem

Nujhat Tasneem

Auto-generated profile, based on publicly available information

Nujhat Tasneem

School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JHJae Hur
Jae Hur
YLYuan-Chun Luo
Yuan-Chun Luo
NTNujhat Tasneem
Nujhat Tasneem
AKAsif Islam Khan
Asif Islam Khan
SYShimeng Yu
Shimeng Yu
To scale the ferroelectric random access memory (FeRAM) technology toward 28 nm or beyond, it is critical to develop stacked capacitor (with sufficient surface area) to allow good sense margin for the 1-transistor- 1-capacitor (1T1C) bit cell. Therefore, to enable 3-D integration in back-end-of-line (BEOL) process, it is essential to optimize the fabrication recipes in low-thermal budget (50 s) in low temperature (~350 °C), the ferroelectric properties of HZO could be fully manifested. No degradation is shown in the remnant polarization (Pr) under the optimized low-temperature process. Furthermore, the retention/endurance characteristics with different Pr states were measured to determine the minimally required write voltage. Finally, the SPICE simulation is conducted to evaluate the sense margin of the projected 28-nm 1T1C array with stacked cylindrical capacitors using the measured Pr drift behavior over time.

11 June 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
NTNujhat Tasneem
Nujhat Tasneem
MIMuhammad M. Islam
Muhammad M. Islam
ZWZheng Wang
Zheng Wang
HCHang Chen
Hang Chen
JHJae Hur
Jae Hur
AKAsif Khan
Asif Khan
Despite tremendous interests in ferroelectric field-effect transistors (FEFETs) for embedded, data-centric applications, the fundamental trade-offs between memory window (MW) and write voltage to optimize performance remains poorly understood. To that end, we fabricated ferroelectric (FE) ZrO2 based, p-type FEFETs and studied the impacts of FE and the interfacial oxide layer (IL) thicknesses (tFE and tIL, respectively) on device performance. We observe that a decrease of tFE and tIL reduces not only write voltages for erasing and programming, but also the memory window. A quantitative analysis of these results offers the following insights and guidelines for FEFET design: to decrease write voltages, all of tFE, tIL and coercive field of FE needs to decrease, and to compensate for the subsequent decrease in MW, the polarization of the FE needs to be increased - notwithstanding the fact that the reliability implications of the magnitude of FE polarization still need to be understood.

30 August 2021 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
SLS. F. Lombardo
S. F. Lombardo
MTM. Tian
M. Tian
KCK. Chae
K. Chae
JHJae Hur
Jae Hur
NTN. Tasneem
N. Tasneem
AKA. I. Khan
A. I. Khan
The microstructure in fluorite-structure oxide-based ferroelectric thin films, especially when on standard semiconductor manufacturing platforms, is poly-/nano-crystalline, which controls the functionality, performance, and reliability of the device technologies based on them. Understanding the relationships between microstructure, process, and performance for this class of materials has remained challenging. Here, a systematic approach is presented for analyzing and visualizing grains, their size distributions, and interlayer templating effects in ferroelectric thin film systems by utilizing an advanced microscopy technique, namely nanobeam electron diffraction, coupled with dark-field transmission electron microscopy and atomic resolution scanning transmission electron microscopy. A 10 nm TiN/10 nm Hf0.5Zr0.5O2 (HZO)/10 nm TiN ferroelectric heterostructure is probed. A geometric mean of the grain size in HZO of 26.8 nm ranging from 5 to 95 nm with top and bottom TiN layers having a much smaller grain size of approximately 6.8 nm ranging from 3 to 17 nm is observed. Furthermore, there is evidence of templating effects between HZO and TiN grain and domain boundaries showing [111] and [001] growth directions locally for HZO and TiN, respectively.

12 September 2021 in Advanced Electronic Materials
Verified
Journal Article
Closed access
PDF file
NTNujhat Tasneem
Nujhat Tasneem
YYYasmin Mohamed Yousry
Yasmin Mohamed Yousry
MTMengkun Tian
Mengkun Tian
MDMilan Dopita
Milan Dopita
SRSebastian E. Reyes‐Lillo
Sebastian E. Reyes‐Lillo
AKAsif Islam Khan
Asif Islam Khan

20 December 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
DDDipjyoti Das
Dipjyoti Das
PRPrasanna Venkatesan Ravindran
Prasanna Venkatesan Ravindran
CPChinsung Park
Chinsung Park
NTNujhat Tasneem
Nujhat Tasneem
ZWZheng Wang
Zheng Wang
AKAsif Khan
Asif Khan
A major roadblock for the integration of ferroelectric-field-effect transistors (FEFETs) at advanced technology nodes for embedded memory applications is their high, logic-incompatible write voltages. Herein, we explore Ge as a channel material to reduce write voltage of FEFET and report the first demonstration of p-type Ge-FEFETs with record low write voltages of ±1.4 V with a memory window (MW) of 0.6 V at DC and write voltages of ±1.4 V, ±1.8 V and ±2.4 V for MW of 0.2 V, 0.5 V and 0.8 V for a write time of 10 $\mu \text{s}$ , respectively. The write voltages observed in Ge-pFEFETs are ~50% lower than that of a Si-pFEFETs when compared against iso-memory window condition [±2.5 V with a MW of 0.6 V at DC, ±3.5 V for MW of 0.5 V for a write time of 10 $\mu \text{s}$ ]. Such dramatic reduction of write voltages in Ge-pFEFETs is achieved due to the fact that the native oxide of Ge (GeOx), formed at the Ge interface, has a larger dielectric constant and lower thickness than those for SiO2 on the Si platform. In addition, the lower bandgap and higher dielectric constant of Ge may lead to a lower surface potential for a given semiconductor charge, leading to further reduction in the write voltage. Further, our Ge-pFEFETs show write endurance of 107 cycles (the best-in-class for Ge-pFEFETs, as reported in the literature), excellent data retention, and immediate read-after-write capability. Our results indicate the attractiveness of Ge platform for FEFETs for embedded memory applications.

27 January 2023 in IEEE Transactions on Device and Materials Reliability
Verified
Journal Article
Closed access
NTNujhat Tasneem
Nujhat Tasneem
ZWZheng Wang
Zheng Wang
HCHang Chen
Hang Chen
SYShimeng Yu
Shimeng Yu
WCWinston Chern
Winston Chern
AKAsif Khan
Asif Khan
P-type ferroelectric field-effect transistors (p-FEFETs) are of significant interest due to recent reports on their immediate read-after-write capability (unlike their n-type counterparts), which is of prime importance for high-speed, embedded memory applications. We show, for the first time, that the delay for read to restore the memory window after write (i.e., read-after-write delay, td) degrades with continued bipolar stress (voltage cycling) in p-FEFETs, together with memory window (ΔVT) collapse. We also unravel the physical origin of td degradation. We show that post-stress annealing (400∘C/30 min in forming gas) leads to a complete recovery of the subthreshold swing and the gate current to pre-stress levels, and partial recovery of ΔVT and the remnant polarization—but cannot restore p-FEFET’s immediate read capability. This is suggestive of that bipolar stress induced td degradation is associated predominantly with “neutral” traps generated by bipolar stress in the bulk of the gate oxide stack (rather than at the interfaces), as in time-dependent-dielectric breakdown (TDDB).