30 July 2024 in Materials & Design
29 April 2024 in IEEE Transactions on Antennas and Propagation
In this communication, a ridged waveguide (RWG) slot antenna array based on micro-coaxial line (CL) Butler matrix beamforming network (BFN) operating in W-band is proposed. Compared with traditional rectangular waveguide, the employment of RWG decreases the spacing between the adjacent radiators, thereby enhancing the beam-scanning range of the antenna array. Besides, in order to meet the requirements of compact dimensions and precise fabrication, an innovative micro metal additive manufacturing (M-MAM) technology is utilized for antenna fabrication. This technology involves a full-metal process characterized by low loss, ensuring the high-efficiency and high-gain properties of the antenna. During the antenna design using M-MAM technology, fabrication limitations are encountered, resulting in a novel arrangement of the antenna topological structure. The measured results demonstrate that the proposed RWG 4×4 slot antenna array, operating at 100 GHz, achieves a beam-scanning range of ±50° with a maximum gain of 14.5 dBi. The wide beam-scanning range, high operating band, and compact dimensions of the proposed antenna make it suitable for multi-beam applications, providing a novel option for W-band multi-beam antenna.
20 November 2024 in IEEE Internet of Things Journal
High-speed vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications will be crucial for traffic efficiency within intelligent transportation systems in the near future, which necessitates antennas operating at high frequencies with high gains and compact sizes. In this paper, we propose a dual-band substrate integrated cavity (SIC) slot antenna operating in D-band along with its array applications. The antenna excites two high-order radiation modes and utilizes four radiating slots on its top surface to achieve dual-band radiation. Compared to antennas using fundamental modes, the employment of high-order modes results in antennas with larger dimensions, which facilitates fabrication especially in D-band. To accommodate different application scenarios, two antenna arrays are designed, fabricated, and measured. By vertically arranging the feeding networks, a significant reduction in overall antenna size is achieved. The proposed antenna arrays are fabricated by low temperature co-fired ceramic (LTCC) technology which guarantees structural stability, high processing precision, and multi-layered design. Benefiting from high-performance substrate integrated waveguide (SIW) feeding networks, the measured results are reasonably in agreement with the simulated ones. A 2×2 SIC slot antenna array achieves radiation at 150.8 GHz and 166.5 GHz, with gains of 12.1 and 12.4 dBi, respectively. Additionally, a 1×4 SIC slot antenna array achieves radiation at beam pointing angles of -25° and -20° with gains of 7.2 and 10.3 dBi at 147.95 GHz and 163.25 GHz, respectively. As new types of dual-band antenna arrays working in D-band for the first time, they provide promising options for 6G Internet of Things (IoT) applications.
3 September 2024 in IEEE Photonics Technology Letters
In this paper, a dual-band polarization-independent terahertz (THz) metamaterial absorber (MA) based on metal-insulator-metal (MIM) configuration is proposed and measured. The flexible material polyimide is chosen as the substrate. The periodic metal array cell on the top surface is fabricated utilizing four F-shaped metal strips, and due to the high symmetry of the structure, the designed absorber is insensitive to polarization. Furthermore, the impact of structural parameters on the absorption characteristics is numerically investigated, and the results indicate that the absorption peak can be flexibly adjusted by changing the length of the top metal strip. The proposed MA achieves near-perfect absorption at 0.555 THz and 0.797 THz under normal TE and TM polarized incidence, with Q -factors of 23.56 and 45.28, respectively. This work provides a new design strategy for the realization of multi-band THz MA.
14 August 2025 in IEEE Transactions on Microwave Theory and Techniques
Innovative classes of moderate- and broad-band bandpass filters (BPFs) based on a single-ridge waveguide (SRW) operating in D-band are reported. The moderate-band BPF is designed by using a two-level stepped-type SRW, in which a high-order mode is excited and the out-of-band rejection performance is enhanced by introducing metal columns on the SRW top wall. The broad-band BPF follows a similar design concept, with an additional stepped-ridge level that merges adjacent high-order modes to shape a wider transmission band. High-order modes lead to larger dimensions at a specific frequency, thus alleviating D-band fabrication challenges, while the stepped-ridge structure provides more modifiable parameters to better control the filtering characteristics. Both filters share a unified structure, hence demonstrating the scalability and adaptability of the proposed approach through minor geometric adjustments. For practical validation purposes, prototypes of both filters are manufactured using high-precision computer numerical control (CNC) milling technology. Their measured results are in fairly close agreement with the simulated ones. Specifically, the moderate-band BPF exhibits a fractional bandwidth (FBW) of 13.9% at a center frequency of 136.5 GHz, while the broad-band BPF shows an FBW of 39.6% at 139.9 GHz. Furthermore, both filter prototypes feature ultralow minimum in-band insertion-loss levels equal to 0.12 and 0.13 dB, respectively, thus representing a significant improvement over prior-art sub-terahertz (sub-THz) BPFs. Owing to their high operational spectral ranges, low in-band insertion-loss levels, and design flexibility in terms of bandwidth, the engineered D-band BPFs show strong potential for sixth-generation (6G) communication applications.
8 April 2025 in IEEE Antennas and Wireless Propagation Letters
In this letter, a compact self-decoupling cylindrical pattern-diversity dielectric resonator antenna (DRA) is proposed. This design adopts shared coupling slot technology and leverages the cancellation characteristics of coupling current between the common mode (CM) and differential mode (DM), resulting in a significant improvement in isolation between the two ports. Additionally, the design employs CM current to excite the HEM11δ mode at the center of the coupling slot, producing a boresight radiation pattern. On both sides of the coupling slot, DM current is used to excite the TE01δ mode, yielding an omnidirectional radiation pattern. This innovative shared-slotline design allows for the excitation of two modes with distinct radiation characteristics using a single slot. To ensure that both modes resonate at the same frequency, the design utilizes the difference in E-field strength at the bottom of the DRA: the HEM11δ mode exhibits the strongest E-field, while the TE01δ mode shows the weakest. By reducing the dielectric constant around the bottom region of the DRA, it achieves resonance at the same frequency for both modes, enabling the diversity design. To verify the simulation results, a self-decoupling pattern-diversity DRA prototype for 5.2 GHz WLAN application is manufactured and measured. The measurement results demonstrate that the antenna achieves an isolation of higher than 39 dB and an envelope correlation coefficient (ECC) below 0.1 across the 5.2 GHz band.