Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, College of Civil and Transportation Engineering, Shenzhen University & China National Key Laboratory of Green and Long-Life Road Engineering in Extreme Environment (Shenzhen), Shenzhen 518060, China
Auto-generated profile, based on publicly available information
Teng Wang
Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, College of Civil and Transportation Engineering, Shenzhen University & China National Key Laboratory of Green and Long-Life Road Engineering in Extreme Environment (Shenzhen), Shenzhen 518060, China
In this paper a bump-less process is introduced in order to further scale down the pitch of microbumps. Electrical resistance measurement, Cross section SEM and mechanical characterizations show successful 3D stacking using proposed method.
Cementitious composites are ubiquitous in construction, and more and more research is focused on improving mechanical properties and environmental effects. However, the jury is still out on which material can achieve low-carbon and high-performance cementitious composites. This article compares the mechanical and environmental performance of zero-dimensional fullerenes, one-dimensional carbon nanotubes (CNTs), two-dimensional graphene oxide (GO), and three-dimensional nano-graphite platelets (NGPs) on cementitious composites. The literature review shows that two-dimensional (2D) GO has the best mechanical and environmental performance, followed by 3D NGPs, 1D CNTs, and 0D fullerenes. Specifically, GO stands out for its lower energy consumption (120–140 MJ/kg) and CO2 emissions (0.17 kg/kg). When the optimal dosage (0.01–0.05 wt%) of GO is selected, due to its high specific surface area and strong adhesion to the matrix, the compressive strength of the cementitious composites is improved by nearly 50%. This study will help engineers and researchers better utilize carbon-based nanomaterials and provide guidance and direction for future research in related fields.
Granular flow down an inclined plane is ubiquitous in geophysical and industrial applications. On rough inclines, the flow exhibits Bagnold’s velocity profile and follows the so-called $\mu (I)$ local rheology. On insufficiently rough or smooth inclines, however, velocity slip occurs at the bottom and a basal layer with strong agitation emerges below the bulk, which is not predicted by the local rheology. Here, we use discrete element method simulations to study detailed dynamics of the basal layer in granular flows down both smooth and rough inclines. We control the roughness via a dimensionless parameter, $R_a$ , varied systematically from 0 (flat, frictional plane) to near 1 (very rough plane). Three flow regimes are identified: a slip regime ( $R_a \lesssim 0.45$ ) where a dilated basal layer appears, a no-slip regime ( $R_a \gtrsim 0.6$ ) and an intermediate transition regime. In the slip regime the kinematics profiles (velocity, shear rate and granular temperature) of the basal layer strongly deviate from Bagnold’s profiles. General basal slip laws are developed that express the slip velocity as a function of the local shear rate (or granular temperature), base roughness and slope angle. Moreover, the basal layer thickness is insensitive to flow conditions but depends somewhat on the interparticle coefficient of restitution. Finally, we show that the rheological properties of the basal layer do not follow the $\mu (I)$ rheology, but are captured by Bagnold’s stress scaling and an extended kinetic theory for granular flows. Our findings can help develop more predictive granular flow models in the future.
The integration of multi-material 3D printing with origami engineering offers a promising avenue for deployable structures, but weak interfacial bonding between rigid and flexible phases remains a key limitation. This study first proposed four distinct hinge designs (enclosed, interlaced, inserted, and interlocked) for Miura-ori architectures, and subsequently investigated their mechanical behaviors with further elucidation of stress-transfer efficiency and interfacial failure modes under static tensile or compressive loading. Research outcomes identified the 5.0 mm interlaced hinge as the optimal interface design, improving stress distribution at the rigid–flexible interface and suppressing premature debonding. Notably, the dominant failure mode shifted from interfacial separation to ductile fracture within a TPU elastomer. Further research proves that increasing the embedment depth of the interlaced hinge from 1.0 mm to 5.0 mm can significantly increase fracture elongation from 100.8% to 342.4% while maintaining a stable peak tensile strength of approximately 12.5 MPa. At the structural scale, dual-material printed Miura-ori architecture exhibits better mechanical performance than single-material printed spatial counterparts (5163 N vs. 4019 N in compressive capacity, 18.7 mm vs. 8.0 mm in fracture elongation). These findings provide valuable insights into high-performance deployable structure design based on multi-material additive manufacturing.