26 September 2014 in Physica Status Solidi (a)
13 April 2017 in Advanced Materials Interfaces
6 September 2020 in Advanced Electronic Materials
The accurate extraction and the reliable, repeatable reduction of graphene–metal contact resistance (RC) are still open issues in graphene technology. Here, the importance of following clear protocols when extracting RC using the transfer length method (TLM) is demonstrated. The example of back‐gated graphene TLM structures with nickel contacts, a complementary metal oxide semiconductor compatible metal, is used here. The accurate extraction of RC is significantly affected by generally observable Dirac voltage shifts with increasing channel lengths in ambient conditions. RC is generally a function of the carrier density in graphene. Hence, the position of the Fermi level and the gate voltage impact the extraction of RC. Measurements in high vacuum, on the other hand, result in dependable extraction of RC as a function of gate voltage owing to minimal spread in Dirac voltages. The accurate measurement and extraction of important parameters like contact‐end resistance, transfer length, sheet resistance of graphene under the metal contact, and specific contact resistivity as a function of the back‐gate voltage is further assessed. The presented methodology has also been applied to devices with gold and copper contacts, with similar conclusions.
5 September 2018 in IEEE Transactions on Electron Devices
We report on the fabrication and characterization of field-effect transistors (FETs) based on chemical vapor deposited (CVD) graphene encapsulated between few layer CVD boron nitride (BN) sheets with complementary metal-oxide-semiconductor (CMOS) compatible nickel edge contacts. Noncontact terahertz time-domain spectroscopy (THz-TDS) of large-area BN/graphene/ BN (BN/G/BN) stacks reveals average sheet conductivity >1 mS/sq. and average mobility of 2500 cm2/V · s. Improved output conductance is observed in dc measurements under ambient conditions, indicating the potential for radio frequency (RF) applications. Moreover, we report a maximum voltage gain of 6 dB from a low-frequency signal amplifier circuit. RF characterization of the GFETs yields an fT × Lg product of 2.64 GHz · μm and an fMax × Lg product of 5.88 GHz · μm. This paper presents for the first time THz-TDS usage in combination with other characterization methods for device performance assessment on BN/G/BN stacks. The results serve as a step toward scalable, all CVD 2-D material-based FETs for CMOS compatible future nanoelectronic circuit architectures.
29 January 2023 in Advanced Materials Technologies
Graphene is a promising candidate for future electronic applications. Manufacturing graphene‐based electronic devices typically requires graphene transfer from its growth substrate to another desired substrate. This key step for device integration must be applicable at the wafer level and meet the stringent requirements of semiconductor fabrication lines. In this work, wet and semidry transfer (i.e. wafer bonding) are evaluated regarding wafer scalability, handling, potential for automation, yield, contamination, and electrical performance. A wafer scale tool is developed to transfer graphene from 150 mm copper foils to 200 mm silicon wafers without adhesive intermediate polymers. The transferred graphene coverage ranges from 97.9 % to 99.2 % for wet transfer and from 17.2 % to 90.8 % for semidry transfer, with average copper contaminations of 4.7 × 1013 (wet) and 8.2 × 1012 atoms/cm2 (semidry). The corresponding electrical sheet resistance extracted from terahertz time‐domain spectroscopy varied from 450 to 550 Ω sq−1 for wet transfer and from 1000 to 1650 Ω sq−1 for semidry transfer. Although the wet transfer is superior in terms of yield, carbon contamination level, and electrical quality, wafer bonding yields lower copper contamination levels and provides scalability due to existing industrial tools and processes. Our conclusions can be generalized to all 2D materials.
26 October 2015 in IEEE Transactions on Electron Devices
An optimization of the current-to-voltage transfer characteristic of a graphene FET (GFET) compact model, based on drift-diffusion carrier transport, is presented. The improved accuracy at Dirac point extends the model usability for GFETs when scaling parameters, such as voltage supply, gate length, oxide thickness, and mobility, for circuit design exploration. The model's accuracy is demonstrated through fitting to GFETs processed in-house. The model has been written in a standard behavioral language, and extensively run in an analog circuit simulator for designing basic circuits, such as inverters and cascode cells, demonstrating its robustness.