A pre-treatment process was evaluated in this work for wastewater from paper recycling using microwave technology followed by rapid precipitation of contaminants through centrifugation. Artificial neural networks (ANNs) were used to analyze and optimize the turbidity values. Thirty experimental runs were utilized including microwave (MW) power, duration, centrifuge time, and centrifuge speed as input variables, generated by the Central Composite Full Design (CCFD) approach. The experimental turbidity ranged from 8.1 to 19.7 NTU, while predicted values ranged from 8.4 to 19.7 NTU by ANN. The ANN model showed a robust prediction performance with low mean squared error values during training and testing. Moreover, high R2 values showed a remarkable agreement between the experimental observations and ANN predictions. The results obtained from the input values (A:150.00, B:60.00, C:15.00, D:30.00) of sample 2, which gave the lowest turbidity value, showed the most removal of pollution. The results obtained from the input values (A:250.00, B:60.00, C:7.00, D:20.00) of sample 30, which gave the highest turbidity value, showed the least removal of pollution. The results showed that increasing RPM and time of the centrifugation process significantly affected the removal of pollution in wastewater.
This study aims to optimize dissolved oxygen levels in treating wastewater generated during the sawmill drying process, using response surface methodology (RSM). The experimental approach, employing three independent variables centrifuge time, centrifuge RPM, and microwave power, evaluates their impact on the effectiveness of wastewater treatment based on dissolved oxygen levels. Parameter ranges are set at 5-20 minutes for centrifuge time, 15-35 for centrifuge RPM, and 100-250 Watts for microwave power. Optimization results reveal the highest dissolved oxygen value with a centrifuge time of 20.00 minutes, centrifuge RPM of 35.00, and microwave power of 100.00 Watts, yielding a maximum value of 9.85 mg/L. ANOVA analysis of the obtained data confirms the compatibility of the proposed model with experimental results (p<0.05), with R2 and R2 (adj) values calculated at 98.53% and 95.90%, respectively. These findings authenticate the reliability of the proposed model and its alignment with experimental data. In addition, the Lack of fit value obtained as a result of ANOVA analysis was found to be 0.075. Ultimately, response surface methodology (RSM) demonstrates potential contributions to optimizing dissolved oxygen in wastewater treatment experiments.
Günümüzde değişen ve küreselleşen dünya koşulları, insan ihtiyaçlarını ve taleplerini şekillendirmektedir. Değişen koşullar, işletmelerin faaliyetlerini ve gelecek planlamalarını gerçekleştirmek için zorluklar oluşturmaktadır. İşletmeler bu zorlukların üstesinden gelebilmek için doğru ve güvenilir tahminler yapması gerekir. Son yıllarda makine öğrenmesi gibi gelişmiş veri analiz yöntemleri, işletmelerin daha doğru tahminler yapabilmelerine yardımcı olmaktadır. Bu bağlamda çalışmada geleneksel yöntemlerden çoklu doğrusal regresyon yöntemi ile makine öğrenmesi tekniklerinden destek vektör regresyonu ve ridge regresyon yöntemleri kullanılarak bu yöntemlerin tahmin güçleri karşılaştırılmıştır. Turizm talebinin tahmin edildiği çalışmada 2004-2019 dönemi için aylık veriler kullanılmaktadır. Literatürde turizm talebi tahmin edilirken genellikle talep yönü incelenirken çalışmada turizmin konaklama kapasiteleri ve acente sayıları gibi arz yönü modele dahil edilmiştir. Analizler sonucu en iyi tahmin gücüne sahip yöntemin destek vektör regresyonu olduğu sonucuna ulaşılmıştır. Turizm sektöründeki yöneticiler için karar verme ve planlama süreçlerinde geleneksel tahmin yöntemleri yerine makine öğrenmesi yöntemlerinin kullanılabileceği ortaya koyulmaktadır.