Dyes are frequently used in industries such as textile, leather, paper and printing, to water sources causes harmful effects on the environment and human health. Therefore, it is crucial to effectively remove colored contaminants from water in order to protect the environment and public health, maintain biodiversity and preserve the esthetic aspects of water resources. In this study, wood chips obtained from Pinus brutia (PB) tree grown in many parts of the world were turned into biochar and then modified and used for the removal of malachite green, a cationic dye. For this purpose, biochar (PBB) was made by collecting PB wood and turning it into chips (PB). Later, PBB was modified to gain nano-magnetic properties. The structure of the obtained PBB and nM-PBB adsorbents was characterized by FT-IR. pH (2-9), temperature (25 °C-55 °C), time change (15 min-240 min), adsorbent amount change (0.05 g-0.45g) and MG concentration (25 mg/L-250 mg/L) were investigated in MG removal of PBB and nM-PBB. The process was found to be pseudo-second-order and spontaneous endothermic reaction. PBB and nM-PBB were found to be suitable for Langmuir isotherm in MG removal (qmax=13.004 mg/g for PBB, qmax=18.215 mg/g for nM-PBB).
25 October 2022 in Journal of Dispersion Science and Technology
Today, the importance of materials produced by natural means or by synthesis is increasing in the prevention of increasing water pollution. Sophora Japonica fruit seeds (SJfs) were pyrolyzed at 450 °C to produce SJfs-biochar (SJfsB) in this study. Iron nanoparticles were immobilized to the SJfsB structure to form a more active biosorbent matrix. SJfsB and the resulting novel biosorbent (nanomagnetic-Sophora Japonica fruit seeds biochar (nM-SJfsB) were used to remove malachite green (MG) from an aqueous solution. Fourier transform infrared analysis (FTIR) and scanning electron microscopy were used to elucidate the details of the biosorbent properties. The effect on removal was investigated using various parameters. A combined strategy was used to define the adsorption parameters such as adsorbent amount, time, initial dye concentration, pH, and temperature. The maximum adsorption capacity determined by the Langmuir model was 51.020 mg/g for SJfsB-MG and 101.010 mg/g was found for nM-SJfsB-MG. The pseudo second order equation made the equilibrium data suitable. After regeneration, nM-SJfsB can be used for re-adsorption studies and reused for multiple cycles in adsorption and desorption applications without discharging nano-iron particles into aqueous medium. Graphical Abstract
12 April 2024 in Journal of Dispersion Science and Technology
1. Clean water is one of the important aspects of life. As a result of industrial developments, the amount of accessible water is gradually decreasing. Therefore, strict environmental regulations m...
14 November 2023 in Journal of Dispersion Science and Technology
Today, various methods are used to remove the dye pollution in the increasing water. Adsorption is a fast and effective method that has been used since the past. The value of the obtained adsorption capacity varies according to the type of biosorbent material used. The seeds of the fruit of Sophora Japonica (SJfs), a tree commonly found in nature, were pyrolyzed at 450°C to produce biochar (SJfsB) in this study. Iron nanoparticles were immobilized into the SJfsB structure to form a more active biosorbent matrix. The obtained SJfsB and nM-SJfsB were used in the removal of methyl blue, an anionic dye. SJfsB and nM-SJfsB used for dye removal were characterized by FT-IR and SEM instruments. The obtained results revealed that the adsorption process occurred in the pseudo-second-order and was consistent with the Langmuir model. The maximum adsorption capacity for MB removal was 434.783 mg/g for nM-SJfsB and 76.923 mg/g for SJfsB, respectively.