22 January 2020 in ACS Photonics
30 March 2020 in Applied Physics Letters
The large impedance mismatch between the highly resistive amorphous state and the highly conductive crystalline state of is an impediment for the realization of high-speed electrically switched optical devices. In this paper, we demonstrate that tungsten doping can reduce this resistivity contrast and also results in a lower amorphous state resistivity. Additionally, it lowers the contact resistance, improves the optical contrast, and extends the face-centered-cubic state up to , with a minimal impact on thermal conductivity.
26 February 2024 in Applied Physics Letters
Nitrogen-vacancy (NV) centers have considerable promise as high sensitivity magnetometers; however, they are commonly limited by inefficient collection and low contrasts. Laser threshold magnetometry (LTM) enables efficient collection and high contrasts, providing a path toward higher sensitivity magnetometry. We demonstrate an infrared LTM using an ensemble of NV centers in a single-crystal diamond plate integrated into a vertical external cavity surface emitting laser. The laser was tuned to the spin-dependent absorption line of the NV centers, allowing for optical readout by monitoring the laser output power. We demonstrate a magnetic sensitivity of 7.5 nT/Hz in the frequency range between 10 and 50 Hz. Furthermore, the contrast and the projected photon shot noise limited (PSNL) sensitivity are shown to improve significantly by operating close to the lasing threshold, achieving 18.4% and 26.6 pT/Hz near the threshold. In addition, an unexpected saturable absorption phenomenon was observed near the threshold, which enhanced the contrast and projected PSNL sensitivity.
1 August 2021 in AIP Advances
We experimentally probe the multilevel response of GeTe, Ge2Sb2Te5 (GST), and 4% tungsten-doped GST (W-GST) phase change materials (PCMs) using two wavelengths of light: 1550 nm, which is useful for telecom-applications, and near-infrared 780 nm, which is a standard wavelength for many experiments in atomic and molecular physics. We find that the materials behave differently with the excitation at the different wavelengths and identify useful applications for each material and wavelength. We discuss thickness variation in the thin films used as well and comment on the interaction of the interface between the material and the substrate with regard to the multilevel behavior. Due to the differences in penetration depths, absorption, and index contrast, different PCMs could be more suitably used depending on the application and wavelength of operation.
30 June 2022 in Optical Materials Express
For active beam manipulation devices, such as those based on liquid crystals, phase-change materials, or electro-optic materials, measuring accumulated phase of the light passing through a layer of the material is imperative to understand the functionality of the overall device. In this work we discuss a way of measuring the phase accumulation through a switched layer of Ge2Sb2Te5, which is seeing rapid use as means to high speed dynamic reconfiguration of free space light. Utilizing an interferometer in the switching setup and modulating the phase of one arm, the intensity of a probe beam can be captured and phase data pulled from it. Simulations were used to discover the connection between the intensity modulations and the phase information. The technique was tested experimentally and it was found that within error, the measurement was robust and repeatable.