1 January 2016 in Transportation Research Procedia
Funded by the EC FP7 Program, EVolution project is using the Pininfarina Nido concept car as a baseline for its activities, with the goal to demonstrate the sustainable production of a full electric 600kg vehicle (FEV). The project has to be finalized by the end of 2016. The existing Body in White (BiW) has been completely reviewed through a design strategy aiming to reduce the number of parts and using innovative lightweight materials and technologies. The considered Al technologies applied on high performances Al alloys provide the opportunities to obtain components with complex geometries and low thickness, merging different parts into one unique element. Besides, it is possible to process a variable thickness element with a single operation.A “green sand mold” technique allows co-casted joints among elements produced with different Al manufacturing processes.The potential cost reduction and process simplification in terms of time and assembly are promising: current state-of-the-art, based on traditional moulds, does not allow these opportunities.The BiW has been hybridized in certain areas of the underbody with a composite material of the PA family, reinforced with GF. This material has been obtained improving existing ones and developing a production process suitable for scaling to commercial requirements, throughout an advanced sheet thermoforming and 3D-injection method (CaproCAST process).Novel polypropylene nanocomposites (PNC) based on silicate and glass fiber layers demonstrate improved toughness and stiffness and have been selected for crash cross beam and side door. Polyurethane foams based on recycled polymers are explored as sustainable energy-absorbing filling in cross beam sections.Structural epoxy adhesives have been considered to join the BiW parts and welding points are reduced in number: in certain areas spot-welds have been used only to tack the parts during polymerization.In addition to the previous results, current weight of the BiW is 115kg versus 160kg of the baseline car. An FE-analysis on the virtual full vehicle indicates a good structural behavior, considering EU standards of crash homologation and global static and dynamic performances.The developed architecture and the integration of lightweight materials will ensure that the EU maintains its competitiveness against the Asian and United States automobile industries.This topic is focused on the results obtained on the BiW in terms of design strategies, Al and composite materials innovative technologies and joining methods
3 March 2025 in Polymer Composites
EHEnrique Hernández‐Murillo
Enrique Hernández‐Murillo
+3
This study presents Additive Preforming, a novel technique for manufacturing continuous fiber‐reinforced polymer composites. The new technique consists of 3D printing continuous fiber filaments coated with a suitable thermoplastic for the fabrication of continuous fiber preforms. These preforms can eventually be used to produce thermoset composite parts. The manufacturing technology used here to produce epoxy‐carbon composites involved coating a continuous carbon fiber roving with a thermoplastic polymer (binder) to produce a 3D‐printable filament. This filament was then 3D‐printed to create a preform, and the final composite was obtained by impregnating the preform with the epoxy matrix. To optimize the final properties of the epoxy‐carbon composite, a screening protocol for potential thermoplastic binders was developed and implemented. This protocol aimed to identify the most compatible/miscible binders for the epoxy resin. The evaluation was conducted using Hansen's solubility parameters, interfacial tension determinations, and optical microscopy observations. The results identified polycarbonate (PC) and phenoxy resin (PH) as the most suitable candidates. The mechanical properties of the composites were strongly influenced by the binder used, and the best properties (elastic modulus of 32 GPa and flexural strength of 609 MPa) were achieved when PH was used. The carbon fiber content of the composites was also optimized by comparing the mechanical properties of the composites obtained with 12 and 24 k carbon fibers. The resulting epoxy composites – made of phenoxy‐coated continuous carbon fibers and containing approximately 40 wt% of carbon fibers – featured an elasticity modulus of 62 GPa and flexural strength of 852 MPa. Highlights: Additive Preforming is proposed for manufacturing CFPCs. Continuous carbon fiber is coated and 3D‐printed prior to impregnation in epoxy. The established screening protocol ranks binders based on their compatibility. PH was identified as the optimum binder and was validated by mechanical tests. The optimization of the fiber content led to superior mechanical properties.