1 December 2007 in The Journal of the Acoustical Society of America
This paper describes the design, fabrication, and characterization of a bulk-micromachined piezoelectric microphone for aeroacoustic applications. Microphone design was accomplished through a combination of piezoelectric composite plate theory and lumped element modeling. The device consists of a 1.80-mm-diam, 3-μm-thick, silicon diaphragm with a 267-nm-thick ring of piezoelectric material placed near the boundary of the diaphragm to maximize sensitivity. The microphone was fabricated by combining a sol-gel lead zirconate-titanate deposition process on a silicon-on-insulator wafer with deep-reactive ion etching for the diaphragm release. Experimental characterization indicates a sensitivity of 1.66μV∕Pa, dynamic range greater than six orders of magnitude (35.7–169dB, re 20μPa), a capacitance of 10.8nF, and a resonant frequency of 59.0kHz.
1 July 2007 in The Journal of the Acoustical Society of America
The development of a tunable, multiple degree of freedom (MDOF) electromechanical Helmholtz resonator (EMHR) is presented. An EMHR consists of an orifice, backing cavity, and a compliant piezoelectric composite diaphragm. Electromechanical tuning of the acoustic impedance is achieved via passive electrical networks shunted across the piezoceramic. For resistive and capacitive loads, the EMHR is a 2DOF system possessing one acoustic and one mechanical DOF. When inductive ladder networks are employed, multiple electrical DOF are added. The dynamics of the multi-energy domain system are modeled using lumped elements and are represented in an equivalent electrical circuit, which is used to analyze the tunable acoustic input impedance of the EMHR. The two-microphone method is used to measure the acoustic impedance of two EMHR designs with a variety of resistive, capacitive, and inductive shunts. For the first design, the data demonstrate that the tuning range of the second resonant frequency for an EMHR with non-inductive shunts is limited by short- and open-circuit conditions, while an inductive shunt results in a 3DOF system possessing an enhanced tuning range. The second design achieves stronger coupling between the Helmholtz resonator and the piezoelectric backplate, and both resonant frequencies can be tuned with different non-inductive loads.
11 May 2005 in Experiments in Fluids
14 November 2011 in Journal of Applied Mechanics
1 June 2012 in AIAA Journal