This paper presents the dynamical model and analysis of DC shunt, series and permanent-magnet (PM) motors fed by photovoltaic (PV) energy systems at different illuminations. At the full solar intensity, the maximum power point of current/voltage (I/V) characteristic of the PV modules is designed to be at the rated conditions of the machines. The nonlinear behaviour of I/V characteristics of the PV modules and that of the magnetization curve of the ferromagnetic materials of the machines are approximated by polynomial curve fitting. The dynamical analysis of the machines fed by fixed terminal voltage has also been carried out and a comparison between the cases of supplying the motors by fully illuminated solar cells, partially illuminated solar cells and fixed terminal voltage is addressed. The steady-state output characteristics, and the torque-speed characteristics, of the three DC motors with the two inputs are presented and compared. All the simulations are executed using MATLAB.
Data converters are necessary for the conversion process of analog and digital signals. Successive approximation register (SAR) analog-to-digital converters (ADC) can achieve high levels of accuracy while consuming relatively low amounts of power and operating at relatively high speeds. This paper describes a design of 8-bit 125 kS/s SAR ADC with a proposed high-speed comparator design based on dynamic latch architecture. The proposed design of the comparator enhances the performance compared to a conventional dynamic comparator by adding two parallel clocked input complementary metal-oxide semiconductor (CMOS) transistors which reduce the parasitic resistance in the latch ground path and serve to minimize the latch delay time. The design of each sub-system for the ADC is explained thoroughly, which contains a sample and hold circuit, successive approximation register, charge redistribution types digital-to-analog converter, and the new proposed comparator. The proposed design is implemented using 180 nm CMOS technology with a power supply of 1.2 V. The average inaccuracy in differential non-linearity (DNL) is +0.6/−0.8 LSB (least significant bit), and integral non-linearity (INL) is +0.4/−0.7 LSB. The proposed design exhibits a delay time of 157 ps at 1 MHz clock frequency.