A novel waveguide-to-stripline transition utilizing an electromagnetic bandgap (EBG) structure is presented. The proposed transition, which does not require vias or waveguide shorts, delivers a simpler implementation option and allows the stripline to be mounted directly to the flange of a waveguide. The EBG structure is added to suppress parallel plate mode propagation and to ensure the transition can maintain the desired performance when used with arbitrary board dimensions. A 1.0dB insertion loss from 10.6GHz to 11.5GHz and a 10dB return loss bandwidth of 8.1% are achieved and verified by measurement.
A stripline-based composite right/left-handed (CRLH) leaky-wave antenna (LWA) with a tapered aperture is designed for an increased effective aperture size. Experimental results show that the CRLH LWA is able to scan from −33° to 25.5° by sweeping the frequency from 76.75 GHz to 83 GHz, with a half-nower heamwidth (HPRW) of less than 5°.
16 September 2025 in IEEE Transactions on Antennas and Propagation
This paper presents a W-band (75-110 GHz) frequency-scanning leaky-wave antenna with backward-to-forward rapid beam-scanning capability. The design takes advantage of the low-loss and high-dispersion features of an air-filled composite right/left-handed metallic waveguide. Equivalent circuit modeling and a detailed design procedure are presented to facilitate the analysis and design. The design method is validated by a prototype antenna using 3D printing technology. Measurement results are consistent with simulated ones and show a wide field-of-view (FoV) from -15° to +35° when the radiated frequency is swept from 75.4GHz to 79.4GHz, equivalent to a high scanning rate of 9.68°/%BW. In simulation, when operated from 76.5GHz to 81.5GHz, the FoV can cover from -30° to +50°, which translates to a scanning rate of 12.64°/%BW. To the best of the authors’ knowledge, the presented antenna achieves the highest scanning rate in the W-band. The presented design may be a good candidate for millimeter-wave imaging applications that require low loss and rapid beam-scanning, including automotive radars.
This paper presents a new method of gaining spatial resolution in continuous wave (CW) Doppler radars by using a vibrating antenna. Resolution of direction finding, though conventionally controlled through beam steering or other circuitry, is decoupled from the antenna and front-end circuitry by vibrating the antenna in a controlled fashion. It is shown that vibrating an antenna results in an induced Doppler shift, whereby the return from each spatial angle has a different Doppler frequency. This allows for smaller aperture antennas or antenna arrays to be used in place of larger aperture antennas or antenna arrays, thereby reducing the overall system's size and complexity. As a proof of concept, a single vibrating antenna radar is designed, fabricated, and tested in order to verify the angle finding capability for a single, as well as multiple targets. This method may also be expanded into two-dimensional detection by integrating a vibrating one-dimensional array.
28 January 2026 in IEEE Microwave and Wireless Technology Letters
A design method for amplifying composite right/left-handed (CRLH) transmission lines using negative resistance reflection amplifiers is presented in this letter. The introduction of the negative resistance in the shunt branch amplifies the traveling wave while maintaining the bidirectionality and the dispersion characteristics of the CRLH transmission line. Design methodology and calculation are backed up with full-wave simulation and measurement of a negative resistance enabled amplifying CRLH transmission line.