Leilei Huang

Leilei Huang

Auto-generated profile, based on publicly available information

Leilei Huang

Institute of Microelectronic Circuits and Systems, East China Normal University, Shanghai, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2022 in IEEE Transactions on Biomedical Circuits and Systems
Verified
Journal Article
Closed access
WXWangdong Xie
Wangdong Xie
LGLiangyu Gan
Liangyu Gan
LHLeilei Huang
Leilei Huang
CSChunqi Shi
Chunqi Shi
BLBoxiao Liu
Boxiao Liu
RZRunxi Zhang
Runxi Zhang
This paper proposes and experimentally validates a novel concentric circle (CC) model for indoor WiFi sensing. By setting the transmitter and receiver together, the perception model becomes concentric circles with equal spacing, eliminating the blind zone and unequal radial sensitivity problems of the Fresnel zone (FZ) model. Then a human respiratory monitoring system is developed based on this model, which executes the following steps: (1) Principal component analysis (PCA) is applied to the channel state information ratio (CSIR) as a preprocessing to extract the components related to human activities. (2) Human presence and respiratory signal detection are adopted to improve monitoring accuracy. (3) The Doppler respiratory frequency is extracted to calculate the respiratory rate. Experimental results show that the CC model achieves high accuracy in velocity measurement with an error of less than 0.4 cm/s. The respiration monitoring system can accurately monitor human respiration with an error of less than 0.7 bpm within 6 m.

21 June 2024 in IEEE Transactions on Circuits and Systems for Video Technology
Verified
Journal Article
Closed access
GXGuohao Xu
Guohao Xu
LHLeilei Huang
Leilei Huang
ZHZhijian Hao
Zhijian Hao
WLWei Li
Wei Li
SYShiyan Yi
Shiyan Yi
Yibo FanYibo Fan
Yibo Fan
The promotion of the HEVC standard has significantly alleviated the burden of network transmission and video storage. However, its inherent complexity and data dependencies pose a significant challenge in achieving high compression efficiency hardware encoder. To tackle this challenge, we propose several hardware-oriented algorithms and achieve a hardware encoder supporting both intra and inter coding. In terms of algorithms, our optimizations focus on intra mode decision, motion estimation (ME), rate estimation, and merge mode estimation. These optimizations reduce the computational complexity and address the data dependencies within and between encoder modules while maintaining an acceptable compression efficiency. As for hardware, we propose an encoder architecture that supports not only 35 intra prediction modes but also ME with an extensive search range of [±64, ±64]. The uniform 4×4 engine, 2-D data reuse, and timing schedule for intra and inter coding are presented in this architecture to optimize the hardware resource consumption and throughput. Compared with HM 15.0, the proposed hardware-oriented algorithms lead to a 1.88% and 14.57% increase in BD-Rate under the configurations of all intra and low delay P, respectively. Notably, the BD-Rate outperforms all existing hardware encoders supporting 4K resolution. In a GF 28nm fabrication process, the hardware design achieves a clock frequency of 550MHz, supporting 4K@30fps throughput with a hardware gate count of 3154K and memory usage of 1.02MB, and the proposed architecture demonstrates substantial advantages in terms of area, throughput, and power compared to other studies.

17 September 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
SCShushi Chen
Shushi Chen
LHLeilei Huang
Leilei Huang
ZZZhao Zan
Zhao Zan
XZXiaoyang Zeng
Xiaoyang Zeng
Yibo FanYibo Fan
Yibo Fan
Versatile video coding (VVC) introduces multi-type tree (MTT) and larger coding tree unit (CTU) to improve compression efficiency compared to its predecessor High Efficiency Video Coding (HEVC). This leads to higher throughput for fractional motion estimation (FME) to meet the needs of real-time processing. In this context, this article proposes an interpolation-free algorithm based on an error surface to improve the throughput of FME hardware. The error surface is constructed by the rate-distortion costs (RDCs) of the integer motion vector (IMV) and its neighbors. To improve the prediction accuracy, a hardware-friendly RDC estimation strategy is proposed to construct the error surface. The experimental results show that the corresponding Bjontegaard Delta Bit Rate (BDBR) in Random Access (RA), Low Delay P (LDP) and Low Delay B (LDB) configuration increases by only 0.358%, 0.479%, and 0.511% compared with the VVC test model (VTM) 16.0. Compared with the default FME algorithms of VVC, the time cost of FME is reduced by 53.47%, 56.28%, and 54.23%, respectively, in RA, LDP, and LDB configurations. The algorithm is free of iteration and interpolation, which can contribute to low-cost and high-throughput hardware. The proposed architecture can support FME of all coding units (CUs) in a CTU with one layer of MTT under the quaternary tree (QT), and the CU size can vary from $8\times 8$ to $128\times 128$ . Synthesized using GF 28-nm process, the architecture can achieve $7680\times 4320$ @60 fps throughput at 800 MHz, with a gate count of 244 K and power consumption of 76.5 mW. This proposed architecture can meet the real-time coding requirements of VVC.

14 February 2025 in IEEE Signal Processing Letters
Verified
Journal Article
Closed access
ZZZhao Zan
Zhao Zan
LHLeilei Huang
Leilei Huang
SCShushi Chen
Shushi Chen
XZXiaoyang Zeng
Xiaoyang Zeng
Yibo FanYibo Fan
Yibo Fan
The Versatile Video Coding (VVC) standard notably enhances encoding efficiency with the Quad-Tree plus Multi-Type Tree (QTMTT) partition structure. However, the complex QTMTT tool presents substantial challenges in both software and hardware implementation. To overcome those challenges, this paper introduces a hardware-friendly partition decision algorithm for VVC intra and inter coding. Firstly, we propose a lightweight backbone network to extract partition-aware features. Secondly, we employ a Quantisation Parameter (QP) fusion network to regulate the impact of QPs on the partition structure. Additionally, we apply a top-down threshold-driven post-processing algorithm, in which improbable partition types are removed to directly derive the unique partition structure. Experiments show that our method not only exceeds the previous state-of-the-art work in BD-BR performance, but also shows sufficient hardware-friendly characteristics. To the best of our knowledge, this work is among the earliest to comprehensively discuss and implement a hardware-friendly partition decision algorithm.

27 November 2024 in IEEE Transactions on Circuits and Systems for Video Technology
Verified
Journal Article
Closed access
SCShushi Chen
Shushi Chen
LHLeilei Huang
Leilei Huang
ZZZhao Zan
Zhao Zan
ZHZhijian Hao
Zhijian Hao
HZHao Zhang
Hao Zhang
Yibo FanYibo Fan
Yibo Fan
Versatile Video Coding (VVC) employs Affine Motion Compensation (AMC) to process scenes with high-order motion. To improve AMC efficiency, the Affine Motion Estimation (AME) process based on the gradient-based iterative algorithm (GIA) and block match algorithm (BMA) is introduced to the VVC Test Model (VTM). However, the AME process is highly complex and difficult for hardware implementation in real-time applications. In this context, this paper proposes a hardware-friendly AME algorithm and implements the corresponding accelerator. Firstly, the weighted least squares regression is used to reduce the iteration of GIA. Then an iteration-free search scheme is proposed to remove the search dependence during the GIA and BMA process. In addition, a motion vector clamping mechanism and four-level memory organization are proposed to solve the problem of reference pixel reading conflict, which reduces 51.7% and 67.5% internal bandwidth of the AME accelerator. Compared with the default AME process of VTM 16.0, experimental results show that the proposed algorithm reduces AME run time by 81.63% while the corresponding Bjontegaard Delta Bit Rate (BDBR) loss is only 0.492%. The proposed AME accelerator can flexibly support AME search tasks in various configurations. Synthesized with the TSMC 28nm process, the proposed architecture has a gate count of 1313K and a power consumption of 156.83 mW. It can achieve 7680×4320@1.7fps~30fps and the corresponding BDBR loss is 0.492%~1.835%.

28 October 2024 in IEEE Transactions on Circuits and Systems for Video Technology
Verified
Journal Article
Closed access
CLChang Liu
Chang Liu
LHLeilei Huang
Leilei Huang
CZChenyang Zhang
Chenyang Zhang
WLWei Li
Wei Li
ZHZhijian Hao
Zhijian Hao
Yibo FanYibo Fan
Yibo Fan
In High Efficiency Video Coding standard, rate estimation based on context-based adaptive binary arithmetic coding (CABAC) typically achieves high accuracy. However, due to serial data dependencies, hardware implementation solutions suffer from lower throughput. When it comes to the latest generation video coding standard, namely Versatile Video Coding (VVC), the introduction of new features in the coding process poses more challenges for the hardware design of rate estimation. To solve these problems, this paper presents a hardware implementation of high-accuracy and high-throughput rate estimation unit for VVC. In terms of throughput improvement, we propose two optimization algorithms to eliminate the majority of data dependencies in coefficient coding with nearly negligible loss in Bjontegaard Delta (BD)-rate performance. To save hardware resources, we introduce a rate estimation table compression algorithm and an optimized local statistical information storage strategy. Based on these optimizations, we present a hardware implementation for the rate estimation unit and a parallel scheme for the rate-distortion optimization process. The proposed algorithm shows an increase of 0.31% in the BD-rate compared to the VVC test model 19.2. Synthesis results show that the proposed design supports real-time coding of 7680×4320@30fps at 500MHz operating frequency. These results indicate that our proposed design performs well in terms of BD-rate performance and throughput. To the best of our knowledge, this is the first hardware implementation of rate estimation for VVC.