27 June 2025 in Eastern-European Journal of Enterprise Technologies
The object of this study is the thermal and hydraulic characteristics of the oil coolers in a thrust bearing and guide bearing cooling system of hydrogenerators. The study addresses the task to improve the efficiency of the cooling system of the supporting elements of hydrogenerators while maintaining mass and dimension indicators. The main problems in this case are the unbalanced flow of oil within the typical cooling system and different stiffness of the thrust bearing segment supports. The main result is the design of a cooling system structure that ensures effective heat removal from the oil. According to calculations, an oil cooler for a hydrogenerator with a capacity of 56 MW provides removal of 250 kW of losses with a heat transfer margin of 26.2%, for a hydrogenerator with a capacity of 96 MW – 150 kW and 31.8%, respectively. The results are explained by the use of new antifriction materials for supporting elements (fluoroplastic-4) and a higher strength group material for the thrust bearing disk. The designed structure of the cooling system enables operation with preservation of isotropy of cooling liquids and does not have "dead" zones of these liquids flow. A feature of the proposed method for calculating oil coolers is the addition to existing criterion equations of an experimental coefficient B, which takes into account the peculiarity of the geometry of the structure in addition to the nature of the oil flow and gas-dynamic parameters. The action of three-dimensional forces, temperatures, and pressures within the base metal and cooling liquids were comprehensively taken into account. The proposed structures of the thrust bearing and guide bearing, as well as their cooling systems, could be implemented in the design and modernization of medium and high-power hydrogenerators
30 March 2026 in Electrical Engineering and Power Engineering
Purpose. The aim of the work is to conduct theoretical research and develop a methodology for determining the optimal operating slip value to minimize electrical losses under varying load conditions on the induction motor rotor shaft. Methodology. The research was conducted using the fundamentals of mathematical modeling theory for a generalized AC electrical machine, classical optimization methods, the basics of automated control theory, loss minimization techniques in induction motor drives, and methods for the interpolation and approximation of calculated data. Findings. A methodology has been developed for determining the optimal operating slip value to minimize electrical losses under varying rotor shaft load conditions in a quasi-steady-state mode of induction motor operation. A universal objective function for minimizing electrical losses in the induction motor as a function of slip frequency has been obtained. In the process of solving the optimization problem using classical single-variable optimization methods, an expression for the optimal slip frequency was derived, as well as the relationships between current magnitudes and the parameters of the induction motor stator and rotor winding phases. These were obtained based on the conventional mathematical description of a generalized AC electrical machine for its steady-state operation. The effectiveness of the proposed methodology has been proven using the example of an AIR225M2 induction motor with a power rating of 55 kW, for which the electrical loss dependence in a quasi-steady-state mode under a static load of Mc = 0.5Mnom was obtained. It was established that the optimal slip value for this induction motor is s = 0.038. Originality. For induction motors of various power ratings, a universal objective function has been derived to minimize electrical losses as a function of slip frequency. This function enables the determination of a performance characteristic representing the dependence of the maximum attainable efficiency on the load torque on the shaft for induction motors of any power range. Practical value. The research findings can be implemented in induction motor drive systems equipped with rotor speed sensors to enable automated self-regulation of the motor speed. This ensures the rotor operates at the optimal slip value across the entire load range of the driven mechanism.