Biological hazardous substances such as certain fungi and bacteria represent a high risk for the broad public if fallen into wrong hands. Incidents based on bio-agents are commonly considered to have unpredictable and complex consequences for first responders and people. The impact of such an event can be minimized by an early and fast detection of hazards. The presented approach is based on optical standoff detection applying laser-induced fluorescence (LIF) on bacteria. The LIF bio-detector has been designed for outdoor operation at standoff distances from 20 m up to more than 100 m. The detector acquires LIF spectral data for two different excitation wavelengths (280 and 355 nm) which can be used to classify suspicious samples. A correlation analysis and spectral classification by a decision tree is used to discriminate between the measured samples. In order to demonstrate the capabilities of the system, suspensions of the low-risk and non-pathogenic bacteriaBacillus thuringiensis,Bacillus atrophaeus,Bacillus subtilis,Brevibacillus brevis,Micrococcus luteus,Oligella urethralis,Paenibacillus polymyxaandEscherichia coli(K12) have been investigated with the system, resulting in a discrimination accuracy of about 90%.
Laser Doppler anemometry (LDA), sometimes also referred to as cw Doppler lidar, is a promising optical technique for the measurement of primary flight data such as true air speed, angle of attack, and angle of sideslip. Multiple flight campaigns have shown the potential of this technique for future air data systems. However, LDA remains challenging in low aerosol environments at cruise altitude, and the high raw-data bandwidth of LDA sensors impedes real-time operation. In this work, we present a real-time preprocessing scheme, which is optimized to handle the signal structure of single-particle scattering events. We discuss how this scheme is implemented on system-on-chip field-programmable-gate-array hardware and how it is used with a four channel laser Doppler anemometer.
1 January 2018 in Review of Scientific Instruments
A commercial software defined radio based on a Rafael Micro R820T2 tuner is characterized for the use as a high-frequency lock-in amplifier for frequency modulation spectroscopy. The sensitivity limit of the receiver is . Frequency modulation spectroscopy is demonstrated on the 6406.69 cm−1 absorption line of carbon monoxide.