21 April 2023 in Applied Optics
In recent years, there has been a growing interest in the measurements of the bidirectional reflectance distribution function (BRDF) in industry and research and development. However, there is currently no dedicated key comparison to demonstrate the scale conformity. To date, scale conformity has been proved only for classical in-plane geometries, in comparisons between different national metrology institutes (NMIs) and designated institutes (DIs). This study aims at expanding that with nonclassical geometries, including, for the first time, to the best of our knowledge, two out-of-plane geometries. A total of four NMIs and two DIs participated in a scale comparison of the BRDF measurements of three achromatic samples at 550 nm in five measurement geometries. The realization of the scale of BRDF is a well-understood procedure, as explained in this paper, but the comparison of the measured values presents slight inconsistencies in some geometries, most likely due to the underestimation of measurement uncertainties. This underestimation was revealed and indirectly quantified using the Mandel–Paule method, which provides the interlaboratory uncertainty. The results from the presented comparison allow the present state of the BRDF scale realization to be evaluated, not only for classical in-plane geometries, but also for out-of-plane geometries.
5 October 2021 in Optics Express
The bidirectional scattering-surface reflectance distribution function (BSSRDF) is the function that describes the variation of the radiance of the elementary areas of a surface with respect to the directionally incident radiant flux on that surface. Measurements of the BSSRDF are important for characterizing the translucency of objects and for obtaining those optical parameters affecting volume scattering. However, to date, no traceable measurements of this function are available, since, likely due to its technical complexity, no standard measurement procedure has been established. We have developed a primary facility for measuring the BSSRDF based on a gonio-spectrophotometer with spatial resolution in the collection, spectral resolution in the irradiation, and angular resolution both for irradiation and collection directions. The BSSRDF of twelve homogeneous and translucent samples (with controlled values for the mean diameter of the scattering particles and their concentration) have been measured with relative uncertainties below 3% inside the irradiated area. Some results are shown and commented. This primary facility will allow the BSSRDF scale to be transferred to other instruments.
2 February 2024 in Journal of Optics
The bidirectional scattering-surface reflectance distribution function (BSSRDF) describes the radiance originated by the volume scattering and the surface reflectance of any position on the surface of a sample, when it is directionally irradiated at any other position. The present state of the technology for appearance rendering requires a more detailed physical description of translucent objects by traceable measurements of the BSSRDF. This work presents two primary facilities developed for traceable BSSRDF measurements by different measuring approaches. Their results on the same translucent samples have been compared and the achieved BSSRDF scale has been transferred to a commercial measuring system. This study highlights the problems of the different measuring instrument designs and provides the scientific community with more knowledge on the measurement of the BSSRDF, which will be crucial for future works on material appearance.
22 May 2024 in Applied Optics
The optical properties available for an object are most often fragmented and insufficient for photorealistic rendering of the object. We propose a procedure for digitizing a translucent object with sufficient information for predictive rendering of its appearance. Based on object material descriptions, we compute optical properties and validate or adjust this object appearance model based on comparison of simulation with spectrophotometric measurements of the bidirectional scattering-surface reflectance distribution function (BSSRDF). To ease this type of comparison, we provide an efficient simulation tool that computes the BSSRDF for a particular light-view configuration. Even with just a few configurations, the localized lighting in BSSRDF measurements is useful for assessing the appropriateness of computed or otherwise acquired optical properties. To validate an object appearance model in a more common lighting environment, we render the appearance of the obtained digital twin and assess the photorealism of our renderings through pixel-by-pixel comparison with photographs of the physical object.
22 July 2024 in Metrologia
To perform accurate, high-quality and traceable measurement of optical diffuse transmission, which is quantified using the bidirectional transmittance distribution function (BTDF), a new primary facility has been developed at the Physikalisch–Technische Bundesanstalt (PTB), the German metrology institute. This newly developed reference facility will complement the available calibration services and research facilities at PTB for regular reflectance and transmittance and diffuse reflectance. The performance of the new BTDF setup has been investigated in an internal comparison, where consistency of the results was achieved. A thorough uncertainty analysis results in a minimum combined standard (k = 1) uncertainty of about 0.8 %. Research on the accurate characterisation of the BTDF of samples with non-negligible lateral scattering is being carried out on this new setup. Some first results have shown that the measured BTDF value depends on the applied irradiation area size. An empirical model has been found to describe the diffuse transmission of such translucent samples with different scattering parameters.