Andres Garcia-Ruiz

Andres Garcia-Ruiz

Auto-generated profile, based on publicly available information

Andres Garcia-Ruiz

Univ. de Alcalá (Spain)

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2016 in Optics Express
Verified
Journal Article
Open access
PDF file
JPJ. Pastor-Graells
J. Pastor-Graells
HMHugo F. Martins
Hugo F. Martins
AGA. Garcia-Ruiz
A. Garcia-Ruiz
SMS. Martin-Lopez
S. Martin-Lopez
MHMiguel González Herráez
Miguel González Herráez
So far, the optical pulses used in phase-sensitive OTDR (ΦOTDR) were typically engineered so as to have a constant phase along the pulse. In this work, it is demonstrated that by acting on the phase profile of the optical pulses, it is possible to introduce important conceptual and practical changes to the traditional ΦOTDR operation, thus opening a door for new possibilities which are yet to be explored. Using a ΦOTDR with linearly chirped pulses and direct detection, the distributed measurement of temperature/strain changes from trace to trace, with 1mK/4nε resolution, is theoreticaly and experimentaly demonstrated. The measurand resolution and sensitivity can be tuned by acting on the pulse chirp profile. The technique does not require a frequency sweep, thus greatly decreasing the measurement time and complexity of the system, while maintaining the potential for metric spatial resolutions over tens of kilometers as in conventional ΦOTDR. The technique allows for measurements at kHz rates, while maintaining reliability over several hours.

26 October 2017 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
María R. Fernández RuizMaría R. Fernández Ruiz
María R. Fernández Ruiz
JPJuan Pastor-Graells
Juan Pastor-Graells
HMHugo F. Martins
Hugo F. Martins
AGAndres Garcia-Ruiz
Andres Garcia-Ruiz
SMSonia Martin-Lopez
Sonia Martin-Lopez
MHMiguel González Herráez
Miguel González Herráez
Distributed acoustic sensors (DAS) based on chirped-pulse phase sensitive-optical time-domain reflectometry (chirped-pulse $\Phi$OTDR) have proven capable of performing fully distributed, single shot measurements of true strain or temperature perturbations, with no need for frequency scanning or phase detection methods. The corresponding refractive index variations in the fiber are revealed in the chirped-pulse $\Phi$OTDR trace through a local temporal shift, which is evaluated using trace-to-trace correlations. The accuracy in the detection of this perturbation depends upon the correlation noise and the coherence of the laser source. In this work, we theoretically and experimentally analyze the impact of the laser phase noise in chirped-pulse $\Phi$OTDR. In particular, it is shown that the noise in the readings of strain/temperature variations scale directly with the frequency noise power spectral density of the laser. To validate the developed model, an experimental study has been performed using three lasers with different static linewidths (5 MHz, 50 kHz and 25 kHz), i.e., with different phase noise. Besides, we present a simple technique to mitigate the effect of the laser phase noise in chirped-pulse $\Phi$OTDR measurements. The proposed procedure enables to detect perturbations with high signal-to-noise ratio even when using relatively broad linewidth (i.e. comparatively high phase noise) lasers. Up to 17 dB increase in SNR has been experimentally achieved by applying the proposed noise cancellation technique.

26 September 2017 in Journal of Lightwave Technology
Verified
Journal Article
Open access
JPJuan Pastor-Graells
Juan Pastor-Graells
JNJavier Nuno
Javier Nuno
María R. Fernández RuizMaría R. Fernández Ruiz
María R. Fernández Ruiz
AGAndres Garcia-Ruiz
Andres Garcia-Ruiz
HMHugo F. Martins
Hugo F. Martins
MHMiguel González Herráez
Miguel González Herráez
The use of linearly chirped probe pulses in phase-sensitive optical time-domain reflectometry (ΦOTDR) technology has been recently demonstrated to allow for high-resolution, quantitative, and dynamic temperature or strain variation measurements in a simple and very robust manner. This new sensing technology, known as chirped-pulse ΦOTDR, had a maximum reported sensing range of 11 km. In this paper, a 75-km sensing range with 10-m spatial resolution is demonstrated by using bidirectional first-order Raman amplification. The system is capable of performing truly linear, single-shot measurements of strain perturbations with an update rate of 1-kHz and 1-nε resolution. The time-domain trace of the sensor exhibits a signal-to-noise ratio (SNR) in the worst point of >3 dB, allowing to monitor vibrations up to 500 Hz with remarkable accuracy. To demonstrate the capabilities of the proposed system, we apply <;100 nε vibrations in the noisiest point of the fiber, with a frequency modulated from 70 to 150 Hz over a period of 10 s. The results obtained in these conditions demonstrate a vibration detection SNR of >20 dB (with only 300-ms analysis window and no postprocessing) and no evidence of nonlinearity in the acoustic response. The optical nonlinear effects that the probe pulse could suffer along the sensing fiber are thoroughly studied, paying special attention to potential distortions of the pulse shape, particularly in its instantaneous frequency profile. Our analysis reveals that, for proper values of peak power, the pulse does not suffer any major.

15 July 2019 in Journal of Lightwave Technology
Verified
Journal Article
Open access
HBHari Datta Bhatta
Hari Datta Bhatta
LCLuis Costa
Luis Costa
AGAndres Garcia-Ruiz
Andres Garcia-Ruiz
María R. Fernández RuizMaría R. Fernández Ruiz
María R. Fernández Ruiz
HMHugo F. Martins
Hugo F. Martins
MHMiguel González Herráez
Miguel González Herráez
This paper extends the capabilities of chirped-pulse phase-sensitive optical time-domain reflectometry to the measurement of large dynamic strains over hundreds of meters of standard single-mode fiber. Benefitting from single-shot strain measurements, this technique has already demonstrated dynamic strains of the order of submicrostrains with a sensitivity of picostrains-per-root-Hertz. Yet, for large dynamic strains, it relies on the accumulation of incremental measurements, where each trace is cross correlated with its predecessor to determine the relative change of strain. However, practical time records of measured high slew-rate applied perturbations contain disturbing outliers. We then detail and analyze a post-processing strategy to mitigate this limitation. Through this strategy, we are able to achieve for the first time (to our knowledge) high signal-to-noise Rayleigh-backscattering-based distributed measurements of large and fast dynamic strains of a longitudinally vibrating 4 m section at the end of 210 m of a single-mode fiber: from peak to peak 150-1190 με at vibration frequency of 400 Hz and 50 Hz, respectively.

4 January 2018 in Optics Express
Verified
Journal Article
Open access
PDF file
AGAndres Garcia-Ruiz
Andres Garcia-Ruiz
ADAlejandro Dominguez-Lopez
Alejandro Dominguez-Lopez
JPJuan Pastor-Graells
Juan Pastor-Graells
HMHugo F. Martins
Hugo F. Martins
SMSonia Martin-Lopez
Sonia Martin-Lopez
MHMiguel González Herráez
Miguel González Herráez
We demonstrate a technique allowing to develop a fully distributed optical fiber hot-wire anemometer capable of reaching a wind speed uncertainty of ≈ ±0.15m/s (±0.54km/h) at only 60 mW/m of dissipated power in the sensing fiber, and within only four minutes of measurement time. This corresponds to similar uncertainty values than previous papers on distributed optical fiber anemometry but requires two orders of magnitude smaller dissipated power and covers at least one order of magnitude longer distance. This breakthrough is possible thanks to the extreme temperature sensitivity and single-shot performance of chirped-pulse phase-sensitive optical time domain reflectometry (ΦOTDR), together with the availability of metal-coated fibers. To achieve these results, a modulated current is fed through the metal coating of the fiber, causing a modulated temperature variation of the fiber core due to Joule effect. The amplitude of this temperature modulation is strongly dependent on the wind speed at which the fiber is subject. Continuous monitoring of the temperature modulation along the fiber allows to determine the wind speed with singular low power injection requirements. Moreover, this procedure makes the system immune to temperature drifts of the fiber, potentially allowing for a simple field deployment. Being a much less power-hungry scheme, this method also allows for monitoring over much longer distances, in the orders of 10s of km. We expect that this system can have application in dynamic line rating and lateral wind monitoring in railway catenary wires.

23 January 2017 in Optics Express
Verified
Journal Article
Open access
PDF file
AGAndres Garcia-Ruiz
Andres Garcia-Ruiz
JPJuan Pastor-Graells
Juan Pastor-Graells
HMHugo F. Martins
Hugo F. Martins
KTKenny Hey Tow
Kenny Hey Tow
LTLuc Thévenaz
Luc Thévenaz
MHMiguel González Herráez
Miguel González Herráez
Chemical sensing using optical fibers is often challenging, as it is generally difficult to achieve strong interaction between the guided light and the analyte at the wavelength of interest for performing the detection. Despite this difficulty, many schemes exist (and can be found in the literature) for point chemical fiber sensors. However, the challenge increases even further when it comes to performing fully distributed chemical sensing. In this case, the optical signal which interacts with the analyte is typically also the signal that has to travel to and from the interrogator: for a good sensitivity, the light should interact strongly with the analyte, leading inevitably to an increased loss and a reduced range. Few works in the literature actually provide demonstrations of truly distributed chemical sensing and, although there have been several attempts to realize these sensors (e.g. based on special fiber coatings), the vast majority of these attempts has failed to reach widespread use due to several reasons, among them: lack of sensitivity or selectivity, lack of range or resolution, cross sensitivity to temperature or strain, or need to work at specific wavelengths where fiber instrumentation becomes extremely expensive or unavailable. In this work we provide a preliminary demonstration of the possibility of achieving distributed detection of gas presence with spectroscopic selectivity, high spatial resolution, potential for long range measurements and feasibility of having most of the interrogator system working at conventional telecom wavelengths. For a full exploitation of this concept, new fibers (or more likely, fiber bundles) should be developed capable of guiding specific wavelengths in the IR (corresponding to gas absorption wavelengths) with good overlap with the analyte while also having a solid core with good transmission behavior at 1.55 μm, and good thermal coupling between the two guiding structures.