25 June 2018 in IEEE Transactions on Smart Grid
Fast and reliable service restoration strategy is necessary to restore as many out-of-service loads as possible in a short time. In this article, a mixed-integer second-order cone programming (MISOCP) formulation is proposed for service restoration of distribution network with distributed generations (DGs). This formulation relaxes the original non-convex power flow equations into conic quadratic format. The employment of the conic relaxation is of great importance because it ensures the quality of the obtained solution. The service restoration is formulated as a multi-objective optimization problem considering the minimization of de-energized loads and total number of switching operations. Moreover, PQ and PV model of DGs are considered in this formulation. The proposed method is tested on the 33-bus system and the Taiwan Power Company 84-bus system to show its effectiveness.
13 October 2020 in IEEE Access
To settle the large-scale integration of wind power, it is necessary to enhance the wind power hosting capacity of distribution network. To this end, this paper proposes a stochastic mixed-integer linear programming (MILP) model to enhance the hosting capacity of distribution network with active network management (ANM) strategies. The considered ANM strategies include power factor control, reactive power compensation and network reconfiguration. The coordination of these strategies enables the distribution network to accommodate more wind power without violating its constraints. The proposed model relaxes the original nonlinear power flow equations into linear format, so that a near optimal solution can be obtained with moderate computational burden. The wind power and load demand are inherently variable due to the influence of various factors. Moreover, the output powers of multiple wind turbines (WTs) located at adjacent sites of a wind farm are spatially correlated. To represent the uncertain loads, the roulette wheel mechanism is used to generate the load samples. In addition, a combined method of inverse transformation and Nataf transformation is established to deal with the uncertain and correlated wind power. Then, scenario combination and reduction are conducted to generate representative scenarios. Finally, the feasibility and accuracy of the proposed method are verified via numerical tests on the modified IEEE 33-bus test system.