5 January 2021 in ECS Transactions
CSCarlos Ignacio Sánchez-Sáenz
Carlos Ignacio Sánchez-Sáenz
Aluminum-based batteries have potential advantages such as low flammability, low cost, and 3 electrons in the reaction that give them high charge capacity. Current research focuses on aluminum-ion batteries with carbon-derived cathodes that have achieved fast-charge capability and long-term stability; however, present some problems as: the disintegration of the cathodic material, the use of ionic liquids electrolytes, whose corrosivity, sensitivity to the environment and cost, generate safety and design problems for commercial devices. An aluminum-ion polymer battery was constructed with aluminum foil anode, graphene paper cathode, and an iongel of PMMA-AlCl3(0.68)-EMIm|AlCl4(80%) as the electrolyte, to reduce the environmental sensitivity and achieve different types of assembly. The battery was evaluated using Cyclic Voltammetry and Electrochemical Impedance Spectroscopy (EIS), finding reversible behavior between 1.5V-2.5V vs. Al (QRE) associated with the plasticizer reaction and irreversible reduction peaks between 0.5V-1.5V vs. Al (QRE) produced by the coordination of chloroaluminate cations with the polymer matrix. The battery presented a maximum coulombic efficiency of ~60%, the losses are attributed to the cathode collector corrosion and the irreversibilities in the electrodes.
27 April 2026 in Sustainable Energy Technologies and Assessments
JCJ.A. Calderón-Gutiérrez
6 March 2026 in SSRN Electronic Journal
Cathode materials remain a critical challenge for reducing costs and improving durability in lithium-ion batteries. This work presents a scalable method for synthesizing cathode materials and optimizing slurries using a response-surface experimental design to minimize testing while identifying slurry compositions that increase discharge capacity by boosting active-material loading. Two cathode systems: Li1.2Ni0.3Mn0.5O2 on an α-MnOOH template and LiFePO4/C, were synthesized, scaled, and characterized using Raman spectroscopy, XRD, SEM, and electrochemical analysis. Optimized slurries were then evaluated through densification, adhesion (ASTM D3359-2), and mechanical bending/lamination tests to assess their suitability for 18650 cell assembly. Statistical analysis indicated that binder and Super P content negatively affect discharge capacity, whereas electrode thickness and Super P content positively affect it. A dry-film thickness of 30 µm was identified as optimal for calendering, resulting in better malleability and higher capacity. Custom 18650 cells demonstrated that LFP/C offers superior cycling stability and durability, whereas LMNO α-MnOOH provides higher initial capacities. Overall, this integrated workflow offers a scalable pathway from cathode synthesis to electrode fabrication and 18650 lab-cell assembly.