10 March 2023 in IEEE Access
Load scheduling and peak demand shaving are two critical aspects of the utility grid operation that help both the grid operators as well as end-users. This paper proposes a two-stage community home energy management system for microgrids. The first stage deals with the dynamic clustered community load scheduling scheme. Comparatively flatter power demand was attained using particle swarm optimization (PSO) incorporating user-defined constraints. The new arising or remaining peaks as a consequence of consumer constraints are catered to in the second stage. The second stage proposes a rule-based peak shaving management method for the photovoltaic (PV) systems that are connected to the grid and the battery energy storage systems. The proposed technique determines the dynamic demand and feed-in limits based on the estimations of the upcoming day’s load demand and PV power profiles. Also, the study presents an optimal rule-based management technique for peak shaving of utility grid power that sets the charge/discharge day ahead schedules of the battery. For peak energy minimization, PSO is used to calculate the optimal inputs needed for implementing the appropriate rule-based management strategy. MATLAB is used to test the proposed method for different PV power and load demand patterns, thus, achieving an average improvement of 8.5%.
13 October 2021 in IEEE Access
Power scheduling of domestic appliances is a vital preference for bridging the gap between demand and generation of electricity in a microgrid. For a stable microgrid, an acceptable mechanism must reduce the peak to average ratio (PAR) of power demand with supplementary benefits for consumers as reduced electricity charges. Recent studies have focused on PAR and cost reduction for a small consumer population. Furthermore, researchers have mainly considered homogeneous consumer loads. This study focuses on residential power scheduling for electricity cost reduction for consumers and load profile PAR curtailment for a relatively large consumer population with non-homogeneous loads. A sample population of 1000 consumers from various classes of society is considered. The proposed dynamic clustered community home energy management system (DCCHEMS) allows the clustering of appliances based on time overlap criteria. Comparatively flatter power demand is attained by utilizing the clustered appliances in conjunction with particle swarm optimization under the influence of user-defined constraints. Modified inclined block rates with real-time electricity pricing strategies are deployed to minimize the electricity costs. DCCHEMS achieved higher efficiency rates in contrast to the traditional non-clustering and static clustering optimization schemes. An improvement of 21% in peak to average ratio, 4% in cost reduction, and 19% in variance to mean ratio is obtained.
20 March 2023 in IEEE Access
Grid-connected inverters have a very significant role in the integration of renewable energy resources with utility grids. However, in recent studies, it is revealed that grid-connected inverters are vulnerable to instability when the nature of the grid changes from strong to weak, which produces uncertainty and performance degradation. An increase in grid impedance decreases stability margins, tremendously increases total harmonic distortion after a certain limit, and amplifies the voltage harmonics in the grid. A cascaded reduced switch symmetrical multilevel inverter along with an adaptive hybrid control technique is proposed for injecting power generated from distributed energy resources efficiently and stably to the utility grid. This research contributes twofold: a multilevel inverter topology and the other is its control method. The multilevel inverter reduces total harmonic distortion and size of the filter while increasing power handling capability. The control unit of the proposed system further consists of two parts: one is the synchronous frame current controller, and the other is stationary frame adaptive harmonic compensators. The grid current controller which is working in a synchronous reference frame ensures regulated current injection to the grid. It is not favorable to implement a harmonic compensator in a synchronous reference frame due to computation complexities. Therefore, the stationary reference frame controllers are used for harmonic compensations. But the resultant harmonic compensators have narrow bandwidth. Thus, these are not robust against variation in grid frequency. In this research, this problem is resolved by adding the adaptive features within the harmonic compensators which shift its passing band according to the frequency of the grid while remaining with the same bandwidth. The proposed design of the hybrid frame controller is validated by considering a nine-level inverter connected with a weak grid.
26 April 2021 in IEEE Access
The majority of the current dual function radar-communication (DFRC) systems are producing only an angle-dependent transmit beampattern (BP) and imposing a constraint for the communication receiver to be present within the sidelobe (SL) directions to decode the transmitted information. In this paper, an efficient angle-range dependent DFRC system is proposed using frequency diverse array (FDA)-multiple-input multiple-output (MIMO) configuration. We developed a closed-loop design that improves the tracking task of the system and permits a cognitive selection for an optimum signaling strategy towards the intended communication receiver during each scan. We used two information embedding schemes, a proposed amplitude phase shift keying (APSK) and phase-shift keying (PSK), that utilize either the magnitude ratios and/or phase shifts between the radar waveform pairs towards the communication direction. Hence, the communication link is maintained and the system throughput is enhanced. The simulation results verify that the communication performance is enhanced in terms of low symbol error rate (SER), secure information transmission, and increased throughput, while for radar applications the performance is improved in terms of target detection and parameter estimation. It also showed that the proposed symbol mapping APSK scheme provides a high data rate transmission compared to the existing SL-based information embedding schemes while preserving a low bit error rate (BER). Besides, the Cramer-Rao lower bounds (CRLB) for range and angle estimation and the signal-to-interference-noise ratio (SINR) for the proposed DFRC system are analyzed.
1 January 2026 in IEEE Access