Xueying Zhao

Dr. Xueying Zhao


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2024 in Nano Research
Verified
Journal Article
Closed access
PDF file
XZXueying Zhao
Xueying Zhao
XSXiaohui Sun
Xiaohui Sun
WWWei Wu
Wei Wu
PTPeng Tang
Peng Tang
JDJiaWei Du
JiaWei Du
GWGuohua Wu
Guohua Wu
Organic–inorganic hybrid perovskites are quite promising candidates in the field of electromagnetic wave (EMW) absorption due to their unique physicochemical properties. However, it is still a considerable challenge to satisfy the light weight, broad bandwidth, and strong absorption properties simultaneously. Herein, the solution of methylammonium lead iodide (MAPbI3) perovskites was infiltrated into the pores of reduced graphene oxide (rGO) aerogels. After drying, a series of MAPbI3/rGO composite aerogel (MGA) materials were synthesized by anchoring the MAPbI3 perovskite nanoparticles to rGO sheets with the assistance of rGO templates. Through the adjustment of component ratios, excellent EMW absorption properties are obtained with the synergistic effects of polarization loss, conduction loss, and multiple reflection and scattering of MAPbI3 and rGO. The porous structure of the aerogel and the suitable group distribution ratio allowed the MGA-4 samples to obtain excellent impedance matching and ultra-low density of ∼ 7.69 mg·cm−3. At a low filling ratio of 15 wt.%, the MGA-4 sample simultaneously achieves highly efficient and broadband EMW absorption performance at a thin thickness. The MGA-4 sample obtained a minimum reflection loss value of −64.35 dB and the effective absorption bandwidth (EAB) value of 5.4 GHz at a thickness of 2.08 mm and a maximum EAB (EABmax) value of 6.2 GHz under 2.22 mm. The MGA-5 sample obtained a maximum EAB value of 6.4 GHz with the thinckness of 2.16 mm. Furthermore, the simulation results of the radar cross-section (RCS) verified the component-optimized composites are capable of achieving excellent EMW attenuation. This paper provides a new approach and valuable reference for the development of hybrid perovskite-based microwave absorption materials with lightweight, ultra-broadband, and strong absorption properties.

1 January 2018 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
XZXueying Zhao
Xueying Zhao
ASAiqin Shen
Aiqin Shen
BMBaofu Ma
Baofu Ma
Temperature adaptability of asphalt pavements is very important, due to their potential influence on pavement structure design, particularly in areas that experience significant temperature differences. In this paper, a finite element (FE) model was developed, and Turpan‐Xiaocao Lake Highway in southern Xinjiang was taken as a case study engineering, which tends to experience this adverse environmental condition (temperature difference: 25.5°C; July 14, 2008). In this model, the generalized Kelvin model and the Burgers model were used. The time‐dependent tire pressure was considered. To guide pavement structure design and control pavement distresses in this area, seven alternative pavement structures were selected to simulate and analyze pavement temperature fields and the mechanical responses. It was observed that the influence of air temperature had the greatest impact on Str‐1, possibly due to the thinnest asphalt course. Moreover, when rutting depth, maximum shear stress of the asphalt course, deflection on the pavement surface, and compressive strains at the subgrade top surface were taken as the evaluation indices, the adaptability of asphalt pavements using compound base courses had obvious advantage due to their strong absorption and reflection of load impact. The adaptability of seven structures analyzed in this paper decreased in the following order: Str‐5 > Str‐6 > Str‐4 > Str‐2 > Str‐m > Str‐1 > Str‐3. In addition, it broke the traditional view that asphalt pavement with a flexible base had the poor ability on rutting resistance. Besides, it also suggests that when the thickness of asphalt courses was equivalent, increasing the thickness of chemical‐treated base courses would help with the deformation resistance, and vice versa.

1 January 2024 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
XZXueying Zhao
Xueying Zhao
BMBaofu Ma
Baofu Ma
With the large‐scale maintenance and renovation of asphalt pavement, a considerable amount of reclaimed asphalt pavement (RAP) will be generated. Stacking these wastes occupies a large amount of land and seriously damages the ecological environment. Hence, efficient regeneration of RAP through recycling technology has gained more and more attention. In this paper, some topics were reviewed to further promote the cold recycling (CR) technology and better follow‐up the research progress. First, it discussed the raw materials and the differences and similarities between cement‐emulsified asphalt mortar (CEAM) and cold‐recycled mixtures with emulsified asphalt (CRME). Second, it reviewed the adhesion development of emulsified asphalt mastic, the application of X‐ray technology in microscopic study of CRME and the characteristic of strength development of CRME. The adhesion development of CRME begins with the process of demulsification and hydration caused by the migration and dissipation of water inside the emulsified asphalt mastic. In addition, many factors would influence this process simultaneously. However, the microbehavior mechanism of internal water transport in emulsified asphalt mortar has not yet been thoroughly revealed, and it lacked scientific measurement research on the promoting effect of complex conditions on the development of adhesive properties of mixtures. Therefore, in this paper, they were suggested for future research.

19 February 2017 in DEStech Transactions on Engineering and Technology Research
Verified
Journal Article
Open access
PDF file
XZXueying Zhao
Xueying Zhao
ASAiqin Shen
Aiqin Shen
YGYinchuang Guo
Yinchuang Guo
PLPeng Li
Peng Li
It is a consensus that salt heaving and frost heaving are typical distresses in the sulfate saline soil subgrade. To further investigate the mechanic response of pavement structure in sulfate saline soil area, a finite element(FE) model was established based on fluid-structure interaction(FSI) model in this paper. Then the mechanic response of the asphalt pavement under traffic loads, salt heaving and frost heaving was simulated and analyzed. It is shown that only under salt heaving and frost heaving, the tensile strength of asphalt surface course was seriously inadequate and that at the bottom of semi-rigid base course were negative, which may be helpful to crack resistance at the bottom of base courses. Besides, traffic loads could help to dramatically counteract displacement, tensile stress and strain. However, as a whole, in sulfate saline soil area, asphalt courses should strengthen crack resistance and foundation treatment.

1 February 2020 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
KLKai Liu
Kai Liu
XZXueying Zhao
Xueying Zhao
XWXuewen Wu
Xuewen Wu
SYShuai Yi
Shuai Yi
YZYan Zhou
Yan Zhou
A new type of large-span fabricated grid-plate ribbed composite floor structure is proposed basis on fabricated steel-concrete composite structure. The new structure consists of four sides of rib, bottom slab and internal concrete block. In this paper, the static performance of the new structure is analysed by the finite element method and compared with the combined open-web sandwich plate structure. The analysis results show that the new type floor can reach 1/30-1/35 of the span. Under the same span, mesh size and load, compared with the existing combined open-web sandwich plate floor, the new type floor has large stiffness, small structure height, light weight, and reduce concrete and steel consumption by 77.6% and 7.3%, respectively. The structure is safe, reliable and has good economic benefits.

1 January 2022 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
XZXueying Zhao
Xueying Zhao
ASAiqin Shen
Aiqin Shen
BMBaofu Ma
Baofu Ma
The entrance and exit sections of a tunnel are subject to different environments, pavements, and traffic conditions, which is quite different from the average highway, and it should be considered differentially, when designing pavement structures. However, there are no clear regulations on it in Chinese specifications. Over the years, a lot of studies were carried on the entrance and exit sections of a tunnel, but there are few ones on the pavement design and its mechanical response characteristics. In this paper, the Huangjiayu tunnel and the Yangkou tunnel in Shandong province were taken as case study engineerings and their pavement structures in the entrance and exit sections are referred to as Str‐1 and Str‐2, respectively. In Str‐1, asphalt pavement was applied inside and outside the tunnel and a transition section was applied. In Str‐2, asphalt pavement was applied outside the tunnel and concrete pavement was applied inside the tunnel when it was built in 2004 and a transition section was not applied. Meanwhile, 7 alternative pavement structures (referred to as Str‐1a∼Str‐1g), in which the lengths of transition sections were different, were proposed, simulated, and analyzed through FE program ANSYS. Through the analysis of maximum shear stresses in asphalt courses and tensile stresses at the bottom of base courses, it was found that setting a transition structure is essential, and it can ensure the continuity of pavements and significantly reduce the sudden change of shear stress of asphalt layer and thus prevent premature pavement distresses. Hence, Str‐1 is more reasonable compared with Str‐2. Besides, it was also found that when the asphalt surface outside the tunnel is designed to be three layers, it is more appropriate to use Str‐1, in which the concrete slab in the transition structure has variable cross section, and the length of the concrete slab is 4.5 m. When the asphalt surface outside the tunnel is designed to be two layers, Str‐1b is more reasonable and the length of the concrete slab is also 4.5 m.