This paper presents the design of an 8B digital-to-time converter (DTC) using a pre-skewed delay line and digital time interpolation. The impact of pre-skewing signals on the per-stage-delay, linearity, and power consumption of pre-skewed delay lines is investigated. The linearity of the digital interpolator is explored. The impact of the slope of the inputs of the interpolator on the delay and linearity of the interpolator is analyzed and the maximum slope of the inputs of the interpolator that yields the minimum latency without sacrificing linearity is obtained. The DTC is designed in a TSMC 65 nm 1.0 V CMOS technology and analyzed using Spectre with BSIM4.4 device models. Simulation results show the DNL and INL of the time interpolator are less than 0.1 LSB and 0.18 LSB, respectively. The DNL and INL of the DTC are less than 0.16 LSB and 0.48 LSB, respectively.