Dana Křemenáková

Dana Křemenáková

Auto-generated profile, based on publicly available information

Dana Křemenáková

Department of Material Engineering, Faculty of Textile Engineering, Technical University of Liberec, Studentska 2, 46117 Liberec, Czech Republic

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
Aravin Prince PeriyasamyAravin Prince Periyasamy
Aravin Prince Periyasamy
Mohanapriya VenkataramanMohanapriya Venkataraman
Mohanapriya Venkataraman
DKDana Kremenakova
Dana Kremenakova
Jiří MilitkýJiří Militký
Jiří Militký
Yan ZhaoYan Zhao
Yan Zhao
The commercial availability of inorganic/organic precursors for sol-gel formulations is very high and increases day by day. In textile applications, the precursor-synthesized sol-gels along with functional chemicals can be deposited onto textile fabrics in one step by rolling, padding, dip-coating, spraying or spin coating. By using this technology, it is possible to provide fabrics with functional/multi-functional characteristics including flame retardant, anti-mosquito, water- repellent, oil-repellent, anti-bacterial, anti-wrinkle, ultraviolet (UV) protection and self-cleaning properties. These surface properties are discussed, describing the history, basic chemistry, factors affecting the sol-gel synthesis, progress in sol-gel technology along with various parameters controlling sol-gel technology. Additionally, this review deals with the recent progress of sol-gel technology in textiles in addressing fabric finishing, water repellent textiles, oil/water separation, flame retardant, UV protection and self-cleaning, self-sterilizing, wrinkle resistance, heat storage, photochromic and thermochromic color changes and the improvement of the durability and wear resistance properties.

16 August 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAzam Ali
Azam Ali
Fiaz HussainFiaz Hussain
Fiaz Hussain
SASafira Attacha
Safira Attacha
AKAmbreen A kalsoom
Ambreen A kalsoom
WQWaseem Akhtar Qureshi
Waseem Akhtar Qureshi
DKDana Kremenakova
Dana Kremenakova
In the current research, we present a single-step, one-pot, room temperature green synthesis approach for the development of functional poly(tannic acid)-based silver nanocomposites. Silver nanocomposites were synthesized using only tannic acid (plant polyphenol) as a reducing and capping agent. At room temperature and under mildly alkaline conditions, tannic acid reduces the silver salt into nanoparticles. Tannic acid undergoes oxidation and self-polymerization before the encapsulating of the synthesized silver nanoparticle and forms silver nanocomposites with a thick capping layer of poly(tannic acid). No organic solvents, special instruments, or toxic chemicals were used during the synthesis process. The results for the silver nanocomposites prepared under optimum conditions confirmed the successful synthesis of nearly spherical and fine nanocomposites (10.61 ± 1.55 nm) with a thick capping layer of poly(tannic acid) (~3 nm). With these nanocomposites, iron could be detected without any special instrument or technique. It was also demonstrated that, in the presence of Fe3+ ions (visual detection limit ~20 μM), nanocomposites aggregated using the coordination chemistry and exhibited visible color change. Ultraviolet-visible (UV–vis) and scanning electron microscopy (SEM) analysis also confirmed the formation of aggregate after the addition of the analyte in the detection system (colored nanocomposites). The unique analytic performance, simplicity, and ease of synthesis of the developed functional nanocomposites make them suitable for large-scale applications, especially in the fields of medical, sensing, and environmental monitoring. For the medical application, it is shown that synthesized nanocomposites can strongly inhibit the growth of Escherichia coli and Staphylococcus aureus. Furthermore, the particles also exhibit very good antifungal and antiviral activity.

29 November 2021 in Polymers
Verified
Journal Article
Open access
PDF file
SHShi Hu
Shi Hu
DWDan Wang
Dan Wang
Aravin Prince PeriyasamyAravin Prince Periyasamy
Aravin Prince Periyasamy
DKDana Kremenakova
Dana Kremenakova
Jiří MilitkýJiří Militký
Jiří Militký
MTMaros Tunak
Maros Tunak
A textile material’s electromagnetic interference (EMI) shielding effectiveness mainly depends on the material’s electrical conductivity and porosity. Enhancing the conductivity of the material surface can effectively improve the electromagnetic shielding effectiveness. However, the use of highly conductive materials increases production cost, and limits the enhancement of electromagnetic shielding effectiveness. This work aims to improve the EMI shielding effectiveness (EMSE) by using an ultrathin multilayer structure and the air-permeable textile MEFTEX. MEFTEX is a copper-coated non-woven ultrathin fabric. The single-layer MEFTEX SE test results show that the higher its mass per unit area (MEFTEX 30), the better its SE property between 56.14 dB and 62.53 dB in the frequency band 30 MHz–1.5 GHz. Through comparative testing of three groups samples, a higher electromagnetic shielding effect is obtained via multilayer structures due to the increase in thickness and decrease of volume electrical resistivity. Compared to a single layer, the EMI shielding effectiveness of five layers of MEFTEX increases by 44.27–83.8%. Due to its ultrathin and porous structure, and considering the balance from porosity and SE, MEFTEX 10 with three to four layers can still maintain air permeability from 2942 L/m2/s–3658 L/m2/s.

14 August 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SHShi Hu
Shi Hu
DWDan Wang
Dan Wang
JVJosef Večerník
Josef Večerník
DKDana Křemenáková
Dana Křemenáková
Jiří MilitkýJiří Militký
Jiří Militký
In response to the growing demand for lightweight yet robust materials in electric vehicle (EV) battery casings, this study introduces an advanced carbon fiber-reinforced composite (CFRC). This novel material is engineered to address critical aspects of EV battery casing requirements, including mechanical strength, electromagnetic interference (EMI) shielding, and thermal management. The research strategically combines carbon composite components with copper-plated polyester non-woven fabric (CFRC/Cu) and melamine foam board (CFRC/Me) into a sandwich-structure composite plus a series of composites with graphite particle-integrated matrix resin (CFRC+Gr). Dynamic mechanical analysis (DMA) revealed that the inclusion of copper-plated fabric significantly enhanced the stiffness, and the specific tensile strength of the new composites reached 346.8 MPa/(g/cm3), which was higher than that of other metal materials used for EV battery casings. The new developed composites had excellent EMI shielding properties, with the highest shielding effectives of 88.27 dB from 30 MHz to 3 GHz. Furthermore, after integrating the graphite particles, the peak temperature of all composites via Joule heating was increased. The CFRC+Gr/Me reached 68.3 °C under a 5 V DC power supply after 180 s. This research presents a comprehensive and innovative approach that adeptly balances mechanical, electromagnetic, and thermal requirements for EV battery casings.

21 June 2024 in Fibers
Verified
Journal Article
Open access
PDF file
Jiří MilitkýJiří Militký
Jiří Militký
Jana NovotnáJana Novotná
Jana Novotná
JWJakub Wiener
Jakub Wiener
DKDana Křemenáková
Dana Křemenáková
Mohanapriya VenkataramanMohanapriya Venkataraman
Mohanapriya Venkataraman
More than a third of microplastics in surface waters are formed by microplastics released from textile products containing textile fibers (fibrous microplastics). A large amount of fibrous microplastics enters the environment during textile production and the first few washing cycles. Mechanical, thermal, chemical, and biological damage to textiles causes the generation of fibrous microplastics. Textile manufacturers, dyers and finishers, garment producers, distributors, or consumers contribute to this process. During the construction of textiles, multiple issues need to be addressed simultaneously. They are related to the optimization of technological processes and the construction and functionalization of fiber structures, considering ecological requirements, including suppressing the formation of fibrous microplastics. This research is focused on the specification of reasons for the generation of fibrous microplastics during textile production. The influence of the structure of fibers, abrasive deformations, and surface structure of fabrics on the generation of fibrous microplastics is discussed. The release of fibrous microplastics during washing is mentioned as well.

5 September 2020 in Polymers
Verified
Journal Article
Open access
PDF file
Kai YangKai Yang
Kai Yang
Aravin Prince PeriyasamyAravin Prince Periyasamy
Aravin Prince Periyasamy
Mohanapriya VenkataramanMohanapriya Venkataraman
Mohanapriya Venkataraman
Jiří MilitkýJiří Militký
Jiří Militký
DKDana Kremenakova
Dana Kremenakova
RPRoman Pulíček
Roman Pulíček
Resistance against penetration of various rays including electromagnetic waves (EM), infrared rays (IR), and ultraviolet rays (UV) has been realized by using copper (Cu)-coated fabrics. However, the corrosion of the Cu on coated fabrics influenced the shielding effectiveness of the various rays. Besides, the metal-coated fabrics have high density and are unbreathable. This work aims to solve the problem by incorporating nickel (Ni) into the Cu coating on the ultra-light polyester fibrous materials (Milife® composite nonwoven fabric—10 g/m2, abbreviation Milife) via electroless plating. The electromagnetic interference (EMI), IR test, ultraviolet protection factor (UPF), water contact angle, and air permeability of the Cu/Ni-coated Milife fabric were measured. All the samples were assumed as ultra-light and breathable by obtaining the similar fabric density (~10.57 g/m2) and large air permeability (600–1050 mm/s). The Cu/Ni deposition on the Milife fabrics only covered the fibers. The EM shielding effectiveness (SE) decreased from 26 to 20 dB, the IR reflectance (Rinfrared) decreased from 0.570 to 0.473 with increasing wNi from 0 to 19.5 wt %, while the wNi improved the UPF from 9 to 48. Besides, addition of Ni changed the Cu/Ni-coated Milife fabric from hydrophilicity to the hydrophobicity by observing WCA from 77.7° to 114°.