This study examines the performance of mortar specimens prepared with foundry slags as aggregate replacement (from 20 % to 100 %, wt.%) under aggressive environments such as carbonation, chlorides presence and thermal cycling. The purpose is to assess any possible damaging effect produced due to the replacement, partial or total, of the sand by foundry slags. The research has revealed no significant changes in carbonation depth after 3 weeks of among the tested mortars, with a slightly shorter carbonation depth when sand is fully replaced by foundry slags, attributed to the presence of Ca and Mg compounds in the slags. Thermal cycling leads to a deterioration in compressive performance that increases with cycling. The results have shown that mortars containing foundry slags exhibit slightly poorer performance, which may be related to the more marked differences in thermal expansion coefficient between the slags and the hardened cement paste. Reinforced mortar specimens were exposed to a chloride solution under wet-dry cycles for 300 days. No corrosion signs were revealed for the reinforcements embedded in the mortars prepared with 100 % of foundry slags, whereas corrosion was detected for the steel bars embedded in the reference mortars prepared with the aggregates made of standard sand, and for mixtures of standard sand and slags.