3 September 2004 in IEEE Transactions on Advanced Packaging
The power consumption of microprocessors is increasing at an alarming rate leading to 2X reduction in the power distribution impedance for every product generation. In the last decade, high I/O ball grid array (BGA) packages have replaced quad flat pack (QFP) packages for lowering the inductance. Similarly, multilayered printed circuit boards loaded with decoupling capacitors are being used to meet the target impedance. With the trend toward system-on-package (SOP) architectures, the power distribution needs can only increase, further reducing the target impedance and increasing the isolation characteristics required. This paper provides an overview on the design of power distribution networks for digital and mixed-signal systems with emphasis on design tools, decoupling, measurements, and emerging technologies.
27 July 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
In this paper, we cover the fundamentals of neural networks and Bayesian learning with a focus on signal and power integrity problems arising in packaging. Rather than only focus on mathematical formulations, we explain the important concepts and the intuition behind them, thereby demystifying the use of machine learning for these problems. We also share some of the recent developments in this area along with future research directions in the context of packaging. Links to open source downloadable software for some of the methods discussed are also provided.
19 August 2020 in IEEE Antennas and Wireless Propagation Letters
A broadband and miniaturized planar Yagi AiP design for the fifth-generation (5G) wireless communication is proposed. The monopole taper radiator is adopted for the proposed Yagi antenna design to miniaturize the size, extend the bandwidth, and simplify the feeding network. The proposed AiP design is broadband enough to cover all three 5G New Radio bands simultaneously. The high-precision high-resolution multi-layered glass packaging fabrication process with a new low-loss polymer material coating is adopted to realize the circuit. The operation band is from 24.25 GHz to 40 GHz and the fractional bandwidth is 49%. The overall size for an antenna element is 3.05 mm 5.56 mm which is equal to $0.25_0 0.45_0$ . The measured S11 is smaller than -10 dB within the entire band and the gain is larger than 4 dBi. A 2-by-1 array using the proposed element is also demonstrated with a gain higher than 6.2 dBi within the entire band. Compared with previous works, the proposed AiP design can cover all 5G bands with a competitive size. Thus, it is suitable to be applied to massive arrays and easily integrated into packages to achieve compact system-in-package (SiP) applications while resolving numerous current 5G challenges.
2 March 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper presents the antenna-integrated glass interposer for D-band 6G wireless applications using die embedding technology. We implement the die-embedded package on glass substrates and characterize the electrical performance in D-band. The electrical characterization employs embedded test dies with 50 Ω Ground-Signal-Ground (GSG) ports and coplanar waveguides. We achieve low-loss die-to-package transitions by using staggered dielectric vias, which are compared with the transitions of wire-bonding and flip-chip assembly. The paper provides detailed information on the design, modeling, fabrication, and characterization of the die-to-package interconnects. This paper also demonstrates the integration of microstrip patch antenna array and embedded dies in D-band. The results show superior electrical performance provided by the die-embedded glass interposer. The die-to-package interconnect exhibits good matching (less than -10 dB S11) and low loss (0.2 dB loss) in D-band. The integrated 1 × 8 patch antenna array shows 11.6 dB broadside gain and good matching with the embedded die. Additionally, by using a temporary carrier, the antenna-integrated glass interposer also has great potential for further heterogeneous integration and thermal management.
8 February 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper demonstrates integrated packaging solutions for antenna components in D-band by using glass-based package. We design sub-terahertz patch antennas at 140 GHz frequency band using HFSS simulation, and form arrays of patch antennas for 6G (sub-THz) wireless communication applications. The patch antennas and feeding networks are implemented using microstrip structures on the top of the interposer, with ground planes beneath. Build-up layers of polymer dry films are laminated on a glass core for multi-layer copper metallization, and copper structures are patterned on the polymer layers. For precise fabrication of the antenna and feeding structures in package, we implement the semi-additive patterning process to deposit the copper structures. Adequate measurement methods are applied to address difficulties in D-band antenna measurements. By forming patch antenna arrays, we obtain 10 dBi gain using a 4-element linear array and 14 dBi gain using a 4-by-4 2-D array. The bandwidths achieved for these arrays are 7% (10 GHz) and 5% (7 GHz), respectively, based on return loss measurements. Overall, the measurement results present good match to simulation. Antenna structures on glass substrates demonstrated in this paper represent the basic building block for heterogeneous integration of D-band front-end module in glass-based packages.