Pulugurtha Markondeya

Dr. Pulugurtha Markondeya


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
AWAtom O. Watanabe
Atom O. Watanabe
MAMuhammad Ali
Muhammad Ali
SSSk Yeahia Been Sayeed
Sk Yeahia Been Sayeed
RTRao R. Tummala
Rao R. Tummala
PMPulugurtha Markondeya
Pulugurtha Markondeya
Increasing data rates, spectrum efficiency and energy efficiency have been driving major advances in the design and hardware integration of RF communication networks. In order to meet the data rate and efficiency metrics, 5G networks have emerged as a follow-on to 4G, and projected to have 100X higher wireless date rates and 100X lower latency than those with current 4G networks. Major challenges arise in the packaging of radio-frequency front-end modules because of the stringent low signal-loss requirements in the millimeter-wave frequency bands, and precision-impedance designs with smaller footprints and thickness. Heterogeneous integration in 3D ultra-thin packages with higher component densities and performance than with the existing 2D packages is needed to realize such 5G systems. This paper reviews the key building blocks of 5G systems and the underlying advances in packaging technologies to realize them.

21 September 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AWAtom O. Watanabe
Atom O. Watanabe
TLTong-Hong Lin
Tong-Hong Lin
MAMuhammad Ali
Muhammad Ali
YWYiteng Wang
Yiteng Wang
VSVanessa Smet
Vanessa Smet
MSMadhavan Swaminathan
Madhavan Swaminathan
This article presents the design and demonstration of a high-bandwidth antenna-in-package (AiP) module focusing on low-loss interconnects and Yagi-Uda antenna performance fabricated on a 100-μm low coefficient-of-thermal-expansion (CTE) glass for the 28-GHz band. It shows the modeling, design, and characterization of key technology building blocks along with the process development of advanced 3-D glass packages. The building blocks include impedance-matched antenna-to-die signal transitions, Yagi-Uda antenna, and 3-D active-passive integration with backside die assembly on 100-μm glass substrates. The design and stack-up optimization of antenna-integrated millimeter-wave (mm-wave) modules is discussed. Process development to achieve high-density interconnects and precise dimensional control in multilayered thin glass-based packages is also described. The characterization results of the key technology building blocks show an insertion loss of 0.021 dB per through-package via (TPV), leading to the whole-chain loss of less than 1 dB and a return loss lower than 20 dB. The fabricated Yagi-Uda antenna features high repeatability of wide bandwidth due to the process control enabled by glass substrates. The antenna measurements show a bandwidth of 28.2%, which covers the entire 28-GHz fifth-generation (5G) frequency bands (n257, n258, and n261). The flip-chip assembled low-noise amplifier with 80-μm solder balls shows a maximum gain of 20 dB as desired. The performance of the glass-based package integrated antennas is benchmarked to other 5G substrate technologies, such as organic laminates or co-fired ceramic-based substrates.

19 August 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
TLTong-Hong Lin
Tong-Hong Lin
KKKimiyuki Kanno
Kimiyuki Kanno
AWAtom O. Watanabe
Atom O. Watanabe
PMPulugurtha Markondeya
Pulugurtha Markondeya
RTRao R. Tummala
Rao R. Tummala
Manos M. TentzerisManos M. Tentzeris
Manos M. Tentzeris
A broadband and miniaturized planar Yagi AiP design for the fifth-generation (5G) wireless communication is proposed. The monopole taper radiator is adopted for the proposed Yagi antenna design to miniaturize the size, extend the bandwidth, and simplify the feeding network. The proposed AiP design is broadband enough to cover all three 5G New Radio bands simultaneously. The high-precision high-resolution multi-layered glass packaging fabrication process with a new low-loss polymer material coating is adopted to realize the circuit. The operation band is from 24.25 GHz to 40 GHz and the fractional bandwidth is 49%. The overall size for an antenna element is 3.05 mm 5.56 mm which is equal to $0.25_0 0.45_0$ . The measured S11 is smaller than -10 dB within the entire band and the gain is larger than 4 dBi. A 2-by-1 array using the proposed element is also demonstrated with a gain higher than 6.2 dBi within the entire band. Compared with previous works, the proposed AiP design can cover all 5G bands with a competitive size. Thus, it is suitable to be applied to massive arrays and easily integrated into packages to achieve compact system-in-package (SiP) applications while resolving numerous current 5G challenges.

21 January 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
AWAtom O. Watanabe
Atom O. Watanabe
BTBijan K. Tehrani
Bijan K. Tehrani
TOTomonori Ogawa
Tomonori Ogawa
PMPulugurtha Markondeya
Pulugurtha Markondeya
Manos M. TentzerisManos M. Tentzeris
Manos M. Tentzeris
RTRao R. Tummala
Rao R. Tummala

3 July 2017 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
SSSrikrishna Sitaraman
Srikrishna Sitaraman
VSVijay Sukumaran
Vijay Sukumaran
PMPulugurtha Markondeya
Pulugurtha Markondeya
ZWZihan Wu
Zihan Wu
YSYuya Suzuki
Yuya Suzuki
RTRao R. Tummala
Rao R. Tummala
This paper presents the modeling, design, fabrication, and characterization of an innovative and miniaturized thinfilm bandpass filter with coupled spiral structures in ultrathin glass substrates (30-100 μm). This filter is demonstrated for two applications: 3-D integrated passive devices and embedded thinfilm filters in RF modules. A compact filter design was achieved through an integrated resonant structure that effectively utilizes the inductive and capacitive coupling between metal layers on either side of an ultrathin glass substrate or organic build-up layer. The designed filters (layout area c1 mm 2 with 80-150 μm device thickness) were fabricated on a 30-μm-thin glass substrate using a panel-based low-cost approach with double-side thin-film wiring processes. The effect of process variations on the performance of the proposed structures was also studied. Furthermore, an improved WLAN filter is designed and demonstrated by employing specific structural modifications. The measured frequency response of the filters shows good model-tohardware correlation, with very low insertion loss (0.6 dB) in the passband, and high adjacent-band rejection (>25 dB).

26 March 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
MAMuhammad Ali
Muhammad Ali
KHKai-Qi Huang
Kai-Qi Huang
MSMadhavan Swaminathan
Madhavan Swaminathan
PMPulugurtha Markondeya
Pulugurtha Markondeya
RTRao. R. Tummala
Rao. R. Tummala
Miniaturization of millimeter-wave (mm-wave) filters relies on innovative designs that require fine lines and spacings. These designs drive the need for precision fabrication that cannot be achieved with traditional laminates or co-fired ceramics. This gives unique performance justification to glass substrate technologies for future integrated mm-wave components because of both superior performance and 3-5X reduction in volume. In this paper, laminated glass-based compact inline stepped-impedance resonator (SIR) filters are presented for 5G new radio (NR) modules. The frequency bands of interest are 5G NR bands: n257 and n260. The filters are designed using microstrip transmission lines with fourth-order quasi-elliptic response with skew-symmetric feed. The enhanced transition responses of these filters provide transmission zeros (TZs) on either side of the passband. When these filters are designed for mm-wave applications, their dependency on accuracy of metal patterns increases significantly due to narrow linewidth and spacing requirements to realize moderate fractional bandwidths. Two inline SIR filters are fabricated using large-area, panel-compatible semi-additive patterning (SAP) process on precision redistribution layers (RDL) of a laminated glass substrate stackup. The sensitivity of these filters to the dimensional variations of patterned copper is analyzed, and discrepancy between simulated and measured response of the filters is studied by performing post-fabrication simulations.